SOMTLERK A221 Smart Watch for Men and Women User Manual

SOMTLERK A221 Smart Watch for Men and Women

Press and hold the side power button to turn on the watch
Note: For first use, please charge the watch for 5 minutes, or it may not be turned on. And it takes about 2 hours to fully charge the watch.

• Download App
  • Power on – Click to select the language – Scan the QR code of the watch – Download “GloryFit” app
  • For iOS : Apple App Store
  • For Android : Google Play Store ****

Pair with Watch

1. Open the app, register and log in to your account.
2. Click the third small icon “Device” at the Select device bottom of the page – Click “Add a new device” – Click in the upper right corner – Scan the Select device QR code on the watch (Settings – QR Code) – on the App “A221 (ID-****) would like to pair with your that pops up, select “Pair” – to achieve a successful con- phone.” section (Bluetooth Name: A221)

Note:

1. Turn on the Bluetooth on the mobile phone.
2. Reset the watch when no Bluetooth signal found.
3. Need to enter the app to pair the watch, cannot connect to the Bluetooth in the phone settings.
4. When the Bluetooth is successfully connected, the main interface pulls down and the sign in the upper left corner is on, if there is no connection, the sign in the upper left corner is a gray state.
5. Click the third small icon “Device” at the bottom of the page – Click “More settings” – Click “Device language” to set the language of the watch.

Basic Operation

1. Swipe Down to access quick settings.
   
   **Turn on/off call audio
   Note**: Turn on call audio, in the upper left corner is on, can answer and dial calls. If  in the upper left corner is a gray state,

2. Click to turn off call audio, then turn it on again, and    check on.

3. Need to find “Settings” on the mobile phone – Click “Bluetooth” – Find the Bluetooth name of the watch “A221” – Click to connect

• Menu type

• Mute mode

• Raise to wake

• Flashlight

• Settings

• Do not disturb

• Brightness adjustment

• • Find phone
    Note: Need to turn off the media audio of the watch.

•   Scan to connect to the watch or down- load the APP

1. Swipe Up to enter message interface
2. Swipe Right to enter recently used menu interface.
3. Swipe Left to enter daily exercise, sleep, heart rate, blood oxygen, weather interface.
4. When the screen is on, press the side button to enter menu interface.
5. Press and hold the main interface to select the watch face.
6. .Single click the side button can back to the previous interface.
7. Press and hold the side button for about 3 seconds to shut down.

Setting Mode

Watchface & Theme

• Choose “Dial” and “Theme”, and click the side button to return to the previous interface.

sound & vibration
Set “Vibration” intensity, turn on “Media audio” and turn on “Mute” mode.
Note: When turning on media audio, the watch can sync all sound playback of mobile phone, such as voice as- sistant and music playback.

Bright

• Set the brightness and screen time.

Raise to wake”

• Turn on/off

Password Set

• “Password Switch”, when forgetting password, please reset the watch to factory settings in the mobile APP.

Do not disturb

• Set the start time and end time of “Do not disturb” mode.

system

• “Reboot”, “Power off”, “Re- set” the watch.

OR Code Scan

• to connect to the watch or download the APP.

Info

• Check “Device name”. “Device version”, “Bluetooth address”.

Press the side button to enter the menu to see more functions when the screen is on

Call

• You can select “Contacts” or use “Dial Pad” to dial calls. And you can check “Call Logs” on the watch.
  Note: Click to hang up, click to adjust the volume, click ****to turn on/off microphone. The other party can hear you when the microphone is on, but cannot hear you when the microphone is off. Contact Person setting

• Open the app Click the third small icon “Device” at the bottom – Click “Bluetooth Call” – Click “Sync Contacts” – Click “Open” – on the App “GloryFit” Would Like to Access Your Contacts that pops up and select “OK” to sync contacts to the watch

Daily Exercise

• Swipe down on the interface can check “Calories”, “Distance”, “Steps”(Step details and Weekly data).

Heart Rate

• Monitor heart rate, and slide down on the interface to view heart rate change chart for a week
  Note : To view the 24-hour real-time heart rate change graph, open the app and find the third small icon “De- vice” at the bottom of the page – Click “Heart rate set- tings” – Turn on “Automatic” and “Maximum heart rate reminder” when the heart rate is more than this value, the device will vibrate to remind you.

Training

• Choose a training mode, swipe down on the interface to view training time, heart rate, steps, calories, etc., swipe right to continue/exit training mode, swipe left to enter music control interface.

Blood Oxygen

• Monitor blood oxygen and view the 24-hour blood oxygen change graph, open the app and find the third small icon “Device” at the bottom of the page – Click “Blood oxygen setting” – Turn on “Automatic setting” and set “Time period” and “Cycle”.

Sleep

• Monitor sleep data, slide down on the interface to view deep sleep, light sleep, awake time, and REM(rapid eye movement).

Weather

• Check the weather, swipe down on the interface to view future weather for next three days.

Alarm Clock

• Click “+” to choose “Time” and “Repeat”, and swipe right on the interface to save the alarm clock after setting.

Voice Assistant

• Click to wake up the voice assistant
  Note: Need to turn on “Media audio” on Settings of the watch.

SOS

• sos Open the app – Click the third small icon “Device” at the bottom – Click “SOS Contact” to set

Female Health

• Open the app – Click the fourth small icon “Profile” at the bottom – Click “Physiological cycle” to set reminders
  Note: When registering an account, the gender must be female. Open the app – Click the fourth small icon “Profile” at the bottom – Click on the avatar to set personal information

Shake to Take Picture

• Open the app – Click the third small icon “Device” at the bottom – Click “More settings” – Click “Shake to take picture to enter photograph function

SMS

• Open the app – Click the third small icon “Device” at the bottom – Turn on message notification
  Note: The watch cannot reply text messages.

Charge

• For charging, please place the watch flat, and make sure the metal holes on the back are aligned with the metal tip of the charging head (charging contact spacing: 4mm).
  Note :

1. The rated voltage of the charging head is 5V/0.5A
2. Please do not use the vehicle power supply to charge, to avoid causing the charging cable to age or burn out due to the unstable voltage.

Replace the watchband
Slide the switch of the watch- band, and replace the same specification(watchband width: 22mm).

Precautions

1. Please clean your watch regularly.
2. Please do not wear it too tight to avoid discomfort.
3. Please do not use for swimming. When getting wet, be sure to dry the water on the watch before operating.

Specifications

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>