ORIGIN ACOUSTICS OS60 and 50’s Seasons Outdoor Collection Instruction Manual
- June 13, 2024
- ORIGIN ACOUSTICS
Table of Contents
- Introduction
- Specifications
- What’s Included
- Tools & Items
- About Speaker Wire
- Installing the Wire
- Tracing the Template & Drilling the Holes
- Installing the Speaker
- Connecting the Wire
- Testing & Adjustments
- Troubleshooting
- Technical Assistance
- Limited Lifetime Warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
OS60 & 50’s
Seasons Outdoor Collection
Installation Manual
OS67, OS65DT, OS65, OS57, OS55DT, OS55
Introduction
Thank you for purchasing the Seasons Outdoor OS 60 & 50 Speaker. At Origin
Acoustics, we take pride in providing you with a high quality product. All of
Origin Acoustics’ speakers are designed to have excellent sound quality,
longevity, and a simple installation process.
This instruction booklet covers the necessary information for a smooth
installation, including: the tools you will need, step-by-step instructions
for installation, troubleshooting tips for any errors that may occur, and all
warranty information.
If for any reason you experience problems or if you have installation
questions please call us at
844-674-4461. Hours of operation are
8:00am to 5:00pm (Pacific Time), Monday through Friday.
Specifications
MODEL | OS67 | OS65DT |
---|---|---|
PART | OCS6700B, OCS6700W | OCS6500DTB, OCS6500DTW |
Woofer | 4 x 8” Glass Fiber, 2 Passive Radiator | 4 x 8” IMG, 2 Passive Radiator |
Tweeter | 1” Aluminum | 1” Dual Aluminum |
Frequency Response | 52Hz-20kHz | 58Hz-20kHz |
Power RMS | 50 Watts | 50 Watts |
Power Peak | 150 Watts | 150 Watts |
Impedance | 6 ohm | 6 ohm |
Enclosure | HDPE | HDPE |
Grille | Aluminum | Aluminum |
Dimensions | 3 3/16 x 6 11/16 x 13 1/8” (182 x 172 x 334mm) | 3 3/16 x 6 11/16 x |
13 1/8” (182 x 172 x 334mm)
MODEL| OS65
---|---
PART| OCS6500B, OCS6500W
Woofer| 4 x 8” IMG, 2 Passive Radiator
Tweeter| 1” Aluminum
Frequency Response| 58Hz-20kHz
Power RMS| 50 Watts
Power Peak| 150 Watts
Impedance| 6 ohm
Enclosure| HDPE
Grille| Aluminum
Dimensions| 3 3/16 x 6 11/16 x 13 1/8” (182 x 172 x 334mm)
*All product specifications are subject to change. Please refer to the dealer portal for the latest information.
MODEL | OS57 | OS55DT |
---|---|---|
PART | OCS5700B, OCS5700W | OCS5500DTB, OCS5500DTW |
Woofer | 5 1/4” Glass Fiber | 5 1/4” IMG |
Tweeter | 3/4” Aluminum | Dual 3/4” Aluminum |
Frequency Response | 52Hz-20kHz | 63Hz-20kHz |
Power RMS | 50 Watts | 50 Watts |
Power Peak | 125 Watts | 125 Watts |
Impedance | 6 ohm | 6 ohm |
Dimensions | 3 3/16 x 6 11/16 x 10 13/32” (182 x 172 x 266mm) | 3 3/16 x 6 11/16 |
x 10 13/32” (182 x 172 x 266mm)
Enclosure| HDPE| HDPE
Grille| Aluminum| Aluminum
MODEL| OS55
---|---
PART| OCS5500B, OCS5500W
Woofer| 5 1/4” IMG
Tweeter| 3/4” Aluminum
Frequency Response| 63Hz-20kHz
Power RMS| 50 Watts
Power Peak| 125 Watts
Impedance| 6 ohm
Dimensions| 3 3/16 x 6 11/16 x 10 13/32” (182 x 172 x 266mm)
Enclosure| HDPE
Grille| Aluminum
*All product specifications are subject to change. Please refer to the dealer portal for the latest information.
What’s Included
Tools & Items
• Drywall Saw | • Measuring Tape | • Stud Finder |
---|---|---|
• Speaker Wire | • Drill | • Fish Tape |
• Pencil | • Drill Bit ⅛” (3mm) | • Spray Paint |
• Wire Stripper | • Stiff Wire | • Compressed Air |
Wire Recommendation
The gauge of wire used can have an impact on the performance of your speakers.
Use a multi-stranded wiring designed for amplifier to speaker connections.
Which gauge to select depends on the length of wire to be used on any
particular speaker. The longer your run is, the larger your wire size must be.
Wire Length | Wire Gauge |
---|---|
0 -100’ (0 – 30m) | 16 |
50 – 150’ (15 – 45m) | 14 |
Over 100’ (30m) | 12 |
About Speaker Wire
You will need a wire that has at least two conductors; one that can be
identified as the positive and the other as the negative. All two conductor
wires have some means of identifying which conductor is which, but at times
this identification may be subtle. It’s crucial that you keep track of which
wire you use for positive (+) and negative (-). Typically if the wires are
colored red and black, the red wire is used for positive and the black wire is
used for negative, but sometimes other colors or patterns are used. You can
choose whichever color of wire you want to be positive and negative as long as
you remain consistent throughout the install.
On both your amplifier and your speaker the connectors will be identified as
red for positive and black for negative. It is very important to look
carefully at the speaker wires and be certain that the same wire that is
attached to the positive connector in the amplifier is attached to the
positive connector in the speaker.
Installing the Wire
When choosing the point where the wire exits the house, remember that it’s best if less wire is exposed to the outside elements. Try to find a point in the wall as close to the speaker as possible when drilling a hole for the wire. Once you run the wire through that point, be sure to properly seal the hole. If you’re routing the wire underground, use a direct burial wire. To prevent future damage, it’s recommended to also use a PVC conduit.
Wire Routing
Plan how you’ll route the wire to the desired speaker location. There are
several methods for routing the wire, and you may need to combine several of
them.
Behind the Baseboard
The wire can be routed behind the baseboard by cutting a groove out of the
back of the baseboard, or by buying special baseboard designed for concealing
wires.
Through Walls
When running wires through a wall, be sure to avoid all obstacles such as AC
wiring, pipes, and ducts.
Attic or Basement
When available, you can route the wire through an attic or crawlspace.
Under the Carpet
One option is to lift up the carpet and rout “tape wire” under the carpet.
For New Construction
If these speakers are being installed in a new home during construction, the
installation process will be a bit different (although much simpler). For
these situations, it’s recommended you purchase a bracket. Instructions on how
to install the speakers are provided with the bracket, or can be found on our
website. Visit www.originacoustics.com for
more information.
Tracing the Template & Drilling the Holes
insta
Installing the Speaker
When you’re finished, hang the speaker on the wall. The speaker is designed to have the tweeter at the top if it’s mounted vertically, or to the outside if mounted horizontally. If the speaker is installed horizontally, the logo can be rotated to be right-side-up.
Connecting the Wire
Strip ¼” (6 mm) of the insulation off both ends of the wire. To avoid stray strands, twist them at the end. On the speaker, remove the rubber cover from the input terminal. Pull the wire through the cover, so it can be reattached to the speaker after the wire has been connected.
Insert the wires into the connector, making sure that the positive wire is being attached to the (+) connection and the negative wire is being attached to the (-) connection. (If the negative and positive wires are switched, speaker performance will be drastically impacted.) Insert the connector into the matching receptacle on the speaker. If it’s difficult to insert the connector because the mounting bracket is in the way, the bracket can be rotated to the side. Simply turn the knobs on the top and bottom counter clockwise to loosen the bracket so it can be moved to the side. Slide the cover up the wire and reattach it to the speaker. Connect the wire to the amplifier, and make sure the wire connected to the left speaker output will be routed to the left speaker, right output to right speaker, etc.
Testing & Adjustments
Our season speakers are designed to compensate the bass for the effects of outdoor bass (0dB). The OS56 and OS66 models have a switch to adjust the bass for indoor use (-3dB). To aim the speaker, turn the knobs at the top and bottom counter clockwise to loosen the mounting bracket. Turn the speaker so it’s facing the way you would like it to face and tighten the knobs.
Troubleshooting
If possible, it’s often good to try to isolate the problem first. For example,
if you’re playing a DVD on a television and there’s no sound, try connecting
an MP3 player to the system to see if that works. If it does work, then the
problem is with the television, DVD
player, or the cables connecting them. If it doesn’t work, the problem will be
with the amplifier, speakers, or those cables.
Problem | Possible Cause |
---|---|
No Sound | The volume may be turned down or muted. Check the volume settings on |
both the amplifier and the television/computer/CD player/etc.
No Sound| Make sure the proper source is selected on the amplifier or
receiver.
No Sound| Check the cord connecting the amplifier with the source. The cord
may be damaged or plugged into the wrong input or output.
No Sound| Check the wires connecting the amplifier with the speakers.
Make sure they’re connected properly and not damaged in any way.
Poor Sound Quality| If you hear something like static, or the sound is cutting
in and out, check the audio cables. If the problem increases when a cable is
being moved, then the cable is most likely faulty or not connected properly.
Poor Sound Quality| Today’s audio systems may have several places to adjust
the volume, for example your MP3 player may have a volume control, and your
amplifier may also have one. Check to be certain that the volume isn’t turned
up past 80% on any device.
Poor Sound Quality| Try changing sources to be certain that the selection
you’ve chosen is a good quality recording.
Technical Assistance
If you have any questions or concerns about installing or using this product,
you can reach us through one of the following methods:
Phone: 844-674-4461
Hours of operation: 8:00am – 5:00pm (Pacific Time), Mon – Fri
Email:
techsupport@originacoustics.com
If you are having technical trouble, please include the model number and
briefly explain what steps you took to resolve the problem in your email, or
be prepared to answer these questions over the phone. If you are considering
returning the product, it’s required that you contact Origin Acoustics prior
to any return attempts. This way we can determine if the issue can be resolved
without returning the product, or if needed we can provide instructions and
support for the return process.
Limited Lifetime Warranty
Origin Acoustics warrants to the original retail purchaser only that this
Origin Acoustics product will be free from defects in materials and
workmanship, provided the speaker was purchased from an Origin Acoustics
authorized dealer.
If the product is determined to be defective, it will be repaired or replaced
at Origin Acoustics’ discretion. If the product must be replaced yet it is no
longer manufactured, it will be replaced with a model of equal to or greater
value that is the most similar to the original. If this is the case,
installing the replacement model may require mounting modifications; Origin
Acoustics will not be responsible for any such related costs.
Requirements & Warranty Coverage
This warranty may not be valid if the product was purchased through an
unauthorized dealer. This warranty only applies to the individual that made
the original purchase, and it cannot be applied to other purchases. The
purchaser must be prepared to provide proof of purchase (receipt). This
warranty will not be valid if the identifying number or serial number has been
removed, defaced, or altered.
*All warranties and warranty conditions are subject to change. Please refer to www.originacoustics.com for the latest information.
Not Covered by Warranty
- Accidental damage
- Damage caused by abuse or misuse
- Damage caused by attempted repairs/modifications by anyone other than Origin Acoustics or an authorized dealer
- Damage caused by improper installation
- Normal wear, maintenance, and environmental issues
- Damage caused by voltage inputs in excess of the rated maximum of the unit
- Damage inflicted during the return shipment
Return Process
Before making any return attempts, it is required that you first contact
Origin Acoustics. Return product to Origin Acoustics or your dealer, either in
person or by mail. It’s preferable if the product is returned in the original
packaging. If this isn’t possible, the customer is responsible for insuring
the shipment for the full value of the product.
This warranty is in lieu of all other expressed or implied warranties. Some
states do not allow limitations on implied warranties, so this may not apply
depending on the customer’s location. (For more information, see Magnuson-Moss
Warranty Act.)
6975 S Decatur BLVD, Las Vegas, NV 89118 •
www.originacoustics.com •
844-674-4461
©2019 Origin Acoustics. All copyrighted, trademarked and patented elements
mentioned herein are the sole property of Origin Acoustics.