Paul Neuhaus Business Desk Lamp Instructions
- June 4, 2024
- Paul Neuhaus
Table of Contents
Business Desk Lamp
Instruction Manual Paul Neuhaus GmbH
Olakenweg 36 -59457 Werl
Germany
Instruction
The range of activity for lamp arm and chimney:
- Please control the base of the lamp when adjusting the angle.
- The arm of the lamp has an activity range of 150 degrees. (It may break by over-adjusting.)
Connect the adapter at the back of the lamp.
Touch the key to turn the light on/off and dim the light in 3 steps.
Battery replacement
Function
Calendar and alarm setting options
Calendar and alarm setting options
-
In normal mode: Press”S” (SET) to enter the date and time mode. Press “S” (SET) again to enter the next setting. The sequence of settings is as follows:
Hour Minute Year Month Day
Press A and V to change the week. -
In setting mode: Press “M” (MODE) or do not operate for 60 seconds and the mode will switch back to normal
-
In normal mode: Press A to switch between 12 and 24 hours format
-
In normal mode: Press V to switch between the units (degree Fahrenheit/degree centigrade)
Alarm setting
-
In normal mode: Press “M” (MODE) to enter the alarm mode
-
In alarm mode: Press”S” (SET) to enter the alarm setting. Press S” (SET) again to set. The sequence of settings is as follows:
Hour Minute Time until the snooze function starts
Sound Press and V to set. -
In alarm mode: Press/\ and V to open or close snooze and alarm. Press the key again to enter the next setting. The sequence of settings is as follows: Open the alarm – Open the snooze function – Close the alarm and the snooze function
-
When the alarm starts, it lasts 1 minute (modifiable factory setting). Afterward, the snooze function starts automatically, but you can also press, V or “M” (MODE) to start the snooze function manually. Press “S” (SET) to close the alarm without activating the snooze function.
Specification
| Farbtemperatur | 3000 K |
|---|---|
| CRI | >80 Ra |
| Leistungsaufnahme | SV 1A |
| Material | ABS+ Gummi |
| Lichtstrom | 230 LM |
| Nennleistung | 6W |
Attention
- Do not self-disassemble the product to avoid electric shocks.
- Please use the adapter and the power socket, which is specified by the vendor to maintain normal working.
- Please do not over-adjust the joint activity parts to avoid damage.
- Please don’t use the light in a high-temperature or high-humidity environment.
- Please don’t straightly look at the LED light source to avoid eye damage.
- In case the below conditions occur, please pull out the power cord and stop using the light:
o The power cord or the power plug breaks.
o The lamp holder damps or rains.
o The shell or the joint of the lamp holder breaks.
o The lamp smokes or sparks.
o The light is abnormally flickering or the LED bulb breaks.