TECKNET M002 Cordless Wireless Mouse User Manual

TECKNET M002 Cordless Wireless Mouse User Manual

Package Contents:

Product Layout：

1. Left Click Button
2. Scroll Wheel
3. Forward Button
4. Backward Button
5. Right Click Button
6. DPI Switch Button
7. Low Battery Indicator

Technical Specifications:

Button Count: 6 buttons
Operating Frequency: 2.4GHz
Receiver Interface: USB version 2.0
Battery Type: 2 x AA Batteries
Operating Voltage: 3.0V
Stand by Current: <0.8mA
Sleep Current: 0.05mA
Transmission Power: 1.5dBm

System Requirements:

To use this mouse, your computer must meet the following hardware requirements and run one of the operating systems listed below.

Hardware:

• PC with a Pentium processor or equivalent AMD processors
• USB 2.0

Operating System:

• Windows 2000, 2003, XP, Vista, Win7, Win8, Win8.1, Win10, macOS, Linux
  Note: The scroll wheel only works under the operating systems listed above.
  If you use the mouse under a different operating system, the mouse may either not work or lose its enhanced features.

Instructions:

Battery Installation

The optical mouse uses two AA batteries (not included).

1. Open the battery cover.
2. Insert the batteries into the compartment, ensuring they correspond with the polarity marking.
3.  Close the battery cover.
4. Switch on the mouse by adjusting the power switch underneath the mouse. The power indicator LED at the top of the mouse will flash.

Note: Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing.

Receiver Connection:

Take out the USB Nano receiver and plug it into a free USB port in your computer. The Plug & Play function of your system will detect that a new device has been connected and install it automatically.

Intelligent Power Saving (IPS):

The mouse is equipped with Intelligent Power Saving (IPS) function.

• When the USB Nano receiver is disconnected or the PC is switched off, the mouse will be switched off automatically for the purpose of power-saving.
• When your mouse is not operated for 10 seconds, it will automatically drop to the first level of IPS. To wake the mouse, click any button.
• When your mouse is not operated for 8 minutes, it will automatically drop to the second level of IPS. To wake the mouse, click any button.

DPI Switch:

Press the DPI button to cycle through 6 DPI levels.

Low Battery Power Indicator:

The mouse is equipped with a low power indicator. When the battery power gets low during the period of use, the Indicator under the Scroll wheel will flash. Please replace the battery.
Note: We recommend you use AA alkaline dry cell batteries.

Reconnection:

There is a connection code for this Mouse. High temperatures, electro-magnetic fields or vibration may influence the code signal and the Mouse may need to be reconnected. Both Mouse and Nano Receiver have a built-in code and one Mouse can be connected to one receive, or several Mice to one Nano Receiver. The Mouse and Nano Receiver may need to be reconnected if subjected to high temperature, electromagnetic fields or strong vibrations.

1. Ensure the battery voltage is correct; if the voltage is low, replace the batteries.
2. Press the right button and middle button (under the scroll wheel) simultaneously (Do not release both buttons until you have completed step 3).
3. Plug the USB Nano receiver into a free USB port of your computer within 15 seconds.
4. Then release both buttons.

Attention:

1. To maximize battery life, it is recommended to use the mouse on a white or light-coloured surface.
2. If not used, the mouse will drop into an auto-sleeping mode within 3 seconds. Press any key or scroll wheel to activate the mouse.
3. Do not use the mouse on a glass or mirrored surface, as these surfaces will cause the mouse to fail temporarily.
4. The mouse might not work smoothly on some special surfaces, such as smooth, dark or black, reflecting and 3D mouse pads surfaces.
5. Avoid using the mouse on a metal surface. Metals, such as iron, aluminum or copper, shield the radio frequency transmission and may slow down the mouse presenter’s response time or cause the mouse to fail temporarily.
6. If your PC has a metal case that contains aluminium or magnesium, use the mouse to the side. The display panel may interfere with the radio frequency signal if you use the mouse directly in front of the PC.

FAQ:

1. What should I do if the mouse does not work?

• Make sure that the polarity of the batteries is correct. The positive (+) and negative (-) ends of each battery must match the positive (+) and negative (-) markings in the battery housing. • Make sure the batteries are not discharged. • Please try to remove the batteries, and reinstall the batteries again. • Verify that your computer's power management features are turned off. • Check the Nano receiver's USB connector is firmly attached to the USB port of your computer

2. The USB Nano receiver is recognized by Windows (2000, 2003, XP, Vista, Win7, Win8, Win8.1, Win10) but the cursor does not move?

• Check whether the low power indicator on the top of the mouse lights up. If the sensor lights up, it is likely that the batteries are discharged. Please replace them. • If replacing the batteries does not help, it is likely that the mouse is not connected to the receiver. Please try reconnection and ensure that the mouse is within the optimal operational working distance (1.5m) from its USB Nano receiver.

SIMPLIFIED EU DECLARATION OF CONFORMITY:
Hereby, Shenzhen Unichain Technology Co., Ltd. declares that the product type M002 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://eu.tecknetonline.com/

IMPORTANT SAFETY INSTRUCTIONS-CAREFULLY FOLLOW THESE INSTRUCTIONS.

Limited 12-Month Warranty

What this warranty covers.
Shenzhen Unichain Technology Co., LTD. (Manufacturer: “Unichain”) warrants to the original purchaser of this TECKNET product that the product shall be free of defects in design, assembly, material, or workmanship.

What the period of coverage is.
Unichain warrants the TECKNET product for 12 Months.

What will we do to correct problems?
Unichain will repair or replace, at its option, any defective product free of charge (except for shipping charges for the product).

What is not covered by this warranty?
All above warranties are null and void if the TECKNET product is not provided to Unichain for inspection upon Unichain’s request at the sole expense of the purchaser, or if Unichain determines that the TECKNET product has been improperly installed, altered in any way, or tampered with. The TECKNET Product Warranty does not protect against acts of God such as flood, earthquake, lightning, war, vandalism, theft, normal-use wear and tear, erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances (e.g. brownouts or sags), non-authorized program, or system equipment modification or alteration.

How to claim the warranty
Please contact retailers or visit TECKNET website or email support@tecknetonline.com for more information. To extend the warranty period, please visit TECKNET website and register your TECKNET products within 90 days of purchase.

Disclaimer
Every effort has been made to ensure that the information and procedures in this guide are accurate and complete, no liability can be accepted for any errors or omissions and we reserve the right to make any changes without further notice to any products mentioned herein.

Correct Disposal of This Product
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household user should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contact. This product should not be mixed with other commercial wastes for disposal.

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
~ Increase the separation between the equipment and receiver.
~ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
~ Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

References

• TECKNET EU

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>