YaFex M109 Cordless Electric Nail Drill User Manual
- June 13, 2024
- YaFex
Table of Contents
Nail Drill set
M109 Cordless Electric Nail Drill
User
Manual
Product Diagram
Technology Specification
Input: DC 5V/500mA
Output: DC 12V/1A
Capacity: 650mA
Rated voltage: 12V
Rated current: 150mA
Speed: 5000-20000 RPM
How to Use
Choose drill bit and inserted front hole of the nail drill machine.
Insert about 3mm spacing, The appropriate distance is shown
the picture.
Put on dust cover to prevent debris from splashing.
Press ON/OFF 2 second turn on, press again to switch fwd/rev,
Press another button adjust speed, Press ON/OFF 2 second turn off.
When 1 indicator flashes, use USB cable to charging.
Grinder Accessories
-
Needle Drill Bit: For nail carving, nail corner polishing.
-
Bullet Drill Bit: Polishing and remove the nail gel.
-
Cone Bit: Polish nail sidewalls and cuticles.
-
Small Barrel: Surface work.
-
Large Barrel: Surface work and shortening.
-
Mandrel+Sanding Band: Shortening and removal.
Attention
- when the nail drill machine is rotating, do not attempt to pull out the grinding bits in the machine.
- Do not attempt to repair the product without authorization, if there is any quality problem, please contact the dealer.
- keep it from children.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>