HAGOR 2383498 HA Gasliftarm Medium Single Instruction Manual
- June 13, 2024
- HAGOR
Table of Contents
HA Gasliftarm Medium Single
Art.-Nr.: 8715
Installation manual
Caution!
Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can
cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the
special conditions at the installation site. Please check this in advance and
replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.
Scope of delivery
-
A Installation on open edge of work surface 1B Installation through a grommet hole Please note!
Before inserting the Base Stern, please detach the Bottom Clamp from the Top Bracket by loosening Bracket Screws with Hex Key . -
Assembly of the gas lift arm segments
Insert the lower arm into the Base Stern, tighten the screw (A) by Hex Key. Attach the upper arm. -
Installation of the VESA mounting plate
-
Cable management
-
Adjustment
HAGOR Products GmbH
Oberbecksener Straße 97
D-32547 Bad Oeynhausen
Telefon: +49(0)57 31-7 55 07-0
Mail: [email protected]