HAGOR 1986 BrackIT L HD Wall Mount Bracket Instruction Manual
- June 4, 2024
- HAGOR
Table of Contents
HAGOR 1986 BrackIT L HD Wall Mount Bracket
Caution!
Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can
cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the
special conditions at the installation site. Please check this in advance and
replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.
Scope of delivery
ID
| Qty| Description
---|---|---
1| 1|
Wall mount
2
| 1|
Bracket
3
| 2| TV Hangs
4| 2|
Decorative covers
5
| 1| Plastic cover
A| 4|
M 4*20mm bolt
B
| 4| M6*25mm bolt
C| 4|
M8*25mm bolt
D
| 4| 0 1 8 X 0 8.5 X 10 spacer
E| 4|
M6 washer
F
| 6| M8 washer
G| 6|
0 10 X 50 Wall anchor
H
| 6| St8 X 65 bolt
F1| 4|
Plastic cover
F1
| 4| M6x8 bolt
F2| 3|
M6 washer
F2
| 3| M6x10 bolt
F3| 1|
Bubble level
Mounting Instructions
a or b – depends on the screen model
Tilt adjustment
**5**
By pulling the handle sideways, the function can be used similar to a ratchet
and thus the desired strength can be achieved.
Cable management
**6**
**7**
Attention! By default the stiffness of the tilt function is deliberately set high. If a lighter setting is desired, loose the screws by using an allen key at the marked position.
Optionally usable fixation for the VESA-Arms
