HAGOR vis-it HP-Serie Floorbase Indoor Totem Instruction Manual
- June 13, 2024
- HAGOR
Table of Contents
Installationsanleitung
vis-it ® HP-Serie
vis-it HP Floorbase | vis-it HP Bolt-Down
max. Bildschirmtiefe max. screen depth
Installation manual
vis-it HP-Serie Floorbase Indoor Totem
Caution!
Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can
cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the
special conditions at the installation site. Please check this in advance and
replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.
Safety instructions
WARNING DANGER
OF SERIOUS INJURY OR DEATH
IMPORTANT SAFETY INSTRUCTIONS
KIOSK FREE STAND
KIOSK BOLTED TO THE FLOOR
THE KIOSK FREESTANDING IS A PRODUCT NOT FIXED TO THE FLOOR OR WALL.
STABILITY IS ENSURED BY THE VALUES INDICATED IN FIGURE 1, THAT IS, WITH A
HORIZONTAL FORCE LESS THAN 25 Kg AT THE HEIGHT OF 1.2 METER.
THE INSTALLER MUST CHECK IF THE VALUES INDICATED IN FIGURE 1 ARE SUITABLE FOR
THE SAFETY REQUIRED IN THE PLACE OF INSTALLATION.
OUR COMPANY (MANUFACTURER) DOES NOT ASSUME LIABILITY FOR DAMAGES RESULTING
FROM IMPROPER USE OFTHE PRODUCT.
DO NOT INSTALL THE KIOSK ON FLOORS OTHER THAN CONCRETE.
THE THICKNESS OF THE FLOOR MUST BE AT LEAST 100 mm AND MUST NOT BE COVERED
WITH OTHER FLOOR MATERIALS. CONCRETE ANCHORS MUST BE INSTALLED DIRECTLY ON THE
CONCRETE SURFACE.
Overview
Scope of delivery
SCREWS
Assembly
HAGOR Products GmbH
Oberbecksener Straße 97
D-32547 Bad Oeynhausen
Telefon: +49(0)57 31-7 55 07-0
Mail: hagor@hagor.de
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>