Danfoss TS2A Electronic Air Temperature Sensor Installation Guide
- June 13, 2024
- Danfoss
Table of Contents
ENGINEERING
TOMORROW
Installation Guide
TS2A
Electronic Air Temperature Sensor
TS2A Electronic Air Temperature Sensor
Location
When fixing the sensor to the
wall take care to note the following:
- Do not situate sensor above a radiator
- Do not situate sensor in direct sunlight
- Fix sensor to wall at eye level
This device may only be installed by a qualified electrician in accordance
with the wiring diagram, the existing safety regulations must be observed
Electrical connection
Screw terminals: maximum terminal 2.5mm2
Ball pressure test: 75°C
Pollution degree: 2
Wiring
Danfoss Limited
Climate Solutions « danfoss.uk + 0330 8086 888 –
customerservice.uk@danfoss.com
Danfoss Ltd., Building 4, Uxbridge Business Park, Sanderson Road, UB8 1DH,
Uxbridge, Buckinghamshire, UK
Any information, including, but not limited to information on selection of
product, its application or use, product design, weight, dimensions, capacity
or any other technical data in product manuals, catalogues descriptions,
advertisements, etc. and whether made available in writing, orally,
electronically, online or via download, shall be considered informative, and
is only binding if and to the extent, explicit reference is made in a
quotation or order confirmation. Danfoss cannot accept any responsibility for
possible errors in catalogues, brochures, videos and other material.
Danfoss reserves the right to alter its products without notice. This also
applies to products ordered but not delivered provided that such alterations
can be made without changes to form, fit or function of the product.
All trademarks in this material are property of Danfoss A/S or Danfoss group
companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/S. All
rights reserved.
© Danfoss Climate Solutions | 2023.07
AN457331476084en-000101| 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>