HOMWMPA 32 x 80 Inch Side Opening Magnetic Screen Door User Manual
- May 15, 2024
- HOMWMPA
Table of Contents
Side Opening Magnetic Screen Door
HOME WIRE MESH
PROTECTION ASSISTANCE
32 x 80 Inch Side Opening Magnetic Screen Door
Wish everyone could find the happiness here!
For more products, please search
HOMWMPA Shop on Amazon.
BRAND INTRODUCTION
HOMWMPA shop is a leading brand which sales home hinds of door screens as
below
Magnetic Door Screen
Side Opening Magnetic Screen Door
Pet-Resistant Door Screen
Retractable Screen Door
RV Screen Door
DIY Window Screen
EVA Magnetic Screen
Garage Door Screen
INSTALLATION TIPS
NOTE
It can be used as left and right side opening magnetic screen door.
Please confirm the size of the door before using , if it doesn’t match, you
can quickly return the product and exchange for right size.
If you still have any question about installation, please check our product
introduction on Amazon, we have attached several videos to help you better
understanding!
INSTALLATION TIPS
- Please make sure the top of the opening slightly higher than two sides. It will help the magnets automatically attract.
- You may need to close the screen manually if you install it to an iron door because the magnet may be attracted to the door.
- Please stick the screen on the flat surface.
- The hook tape won’t stick well on concrete wall or lime wall.
- Align the adsorption position of adjacent magnets.
Step 1:
Clean the door frame before installing the screen and wait until it is
completely dry.
Step 2:
Place the mesh flat on the floor with the loop strip facing up. (Think ahead
if you want to use it as a left curtain or aright curtain.)
Step 3:
Measure your door frame size and attach the supplied hook strip to the top and
each side without peeling off the white paper on the back.
Step 4:
Press Hook&Loop hard for a few seconds to stick them firmly and then peel
off the white paper on back once you’re ready to install.
Step 5:
Stick the mesh to the top of the door frame first and make sure the top of the
opening is slightly higher than two sides, then attach the two sides of the
screen to the frame and make them fit,
Step 6:
Check the mesh if it can be opened and closed correctly and make adjustment if
necessary. You can also use pushpins to fix the screen to the frame.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>