TMT AUTOMATION Dome1-ot Outdoor Camera User Manual

ChowCAM
DOME -1

Dome1-ot Outdoor Camera

User Manual

http://onelink.to/tmk5na

Introduction of the ChowCAM
DOME 1is a device which can be integrated with Chow! App and Chow’s devices.
DOME 1will provide a live view of the site which allows you to check the environment before operation. With a micro SD card, DOME 1 can record each operation and movement for future review.

Product Overview

WARNING
Safety Instructions
Please read this manual carefully before installation.
TMT Automation Inc.is not responsible for improper installation and failure to comply with local electrical and building regulations. Please keep all the components of the ChowCAM and this manual for Further consultation.

Kit contents

1. DOME1T
2. Antenna
3. Adaptor
4. Power plug
5. Anchors with screws kit
6. LANCable

Specifications

General Installation

1. Connectthe antennato DOME-1
2. Connect the power wire with the adaptor
3. Connectthe adaptor to the socket

Apply For a new Chow! account

1. Please scan the QR code and download the Chow! App

2. Press sign up icon and press the agree icon to continue

3. Please type the following information for registration:

   http://onelink.to/tmk5na

a.Email (enter twice for verification)
b.Password (enter twice for verification)
c The password should have at least 1 English character and at least 8 characters in total

4. The system will send a link to your email when the registration succeeded.
5. Please go to your email,and click the link to activate your Chow! account.
6. Pleaselogin to your Chow! account.

Connect DOME 1to Chow! App

Step 1 Add a new ChowCam-DOME 1
Tapthe (+)icon to add a new device
New device -> Accessories -> ChowCam-DOME1Tap the (Scan QR code) icon
Follow the indications as below:
Step1- Power the device
Step 2 – Reset the device
Step 3 – ChowCam-DOME 1 sound once when it has been reset Step 2 Connect ChowCam-DOME 1
Entering the correct password for the Wi-Fi network and press set
Scan the QR code in front of the camera untill it sounds once
The system starts connecting to Wi-Fi network.Step 3 Setting
Set the name of your camera
Tap the icon of the Camera to enter the operation page.

Operation page

1. Name of the device
2. Setting
3. Owner/Manager/User
4. Recorded Video (only with Micro SD card)
5. Speaker
6. Mic
7. Rotation
8. Motion detection

Owner shares the ChowCAM to other users

1. Press the icon on the corner to enter the account management page.
2. Tap the manage shared device.
3. Enter the account which you are going to share.
4. Choose the device you are going to share and tap next.
   a The Owner can decide the permission of device sharing.
   Amanager can share and operate this device, but a normal ser can only operateit
   b.One ChowCAM can only be shared to 10 users.

Push notification

1. Press the icon on the corner to enter the account management page.
2. Tap the push notification setting.
3. Turn ON the switches of the notification.
   *please go to the settings page of your smartphone,
   Find TMT Chow! and allow the notifications™

LED LIGHT STATUS

2.Camera is upgrading Firmware

FAQ

Question1 How to reset DOME 1to default setting?

Question2 Can not see the view after DOME 1 has already completed the Wi-Fi connect ion.

Answer 2 1. Make sure your Wi-Fiis functional. 2.Un-plug and reconnect the power plug of DOME1. 3.Checkif you enter the PIN code at the device page.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>