TMT AUTOMATION BULLET-1 ChowCAM Bullet Outdoor Camera User Manual

TMT AUTOMATION BULLET-1 ChowCAM Bullet Outdoor Camera

• www.tmt-automation.com

Introduction of the ChowCAM

BULLET 1 is a device which can be integrated with Chow! App and Chow’s devices. BULLET 1 will provide a live view of the site which allows you to check the environment before operation. With a micro SD card, BULLET 1 can record each operation and movement for future review.

Product Overview

WARNING

Safety Instructions Please read this manual carefully before installation. TMT Automation Inc. is not responsible for improper installation and failure to comply with local electrical and building regulations. Please keep all the components of the ChowCAM and this manual for further consultation.

Kit contents

1. BULLET 1
2. Power plug
3. LAN cable
4. Antenna
5. Screwdriver
6. Anchors with screws kit
7. Cable gland

Specifications

General Installation

1. Connect the antenna to Bullet-1
2. Connect the power plug to Bullet-1.
3. Connect the power plug to a power outlet.

Apply for a new Chow! account

1. Please scan the QR code and download the Chow! App
2. Press sign up icon and press the agree icon to continue
3. Please type the following information for registration:
   • Email (enter twice for verification)
   • Password (enter twice for verification)
   • The password should have at least 1 English character and at least 8 characters in total
4. The system will send a link to your email when the registration succeeded.
5. Please go to your email , and click the link to activate your Chow! account.
6. Please log in to your Chow! account.

Connect Bullet-1 to Chow! App

Step 1 Add a new ChowCam-BULLET 1

Tap the (+) icon to add a new device New device -> Accessories -> ChowCam- BULLET 1

• Tap the (Scan QR code) icon

Follow the indications as below:

• Step 1 – Power the device
• Step 2 – Reset the device
• Step 3 – ChowCam-BULLET 1 sound once when it has been reset

Step 2 Connect ChowCam-Bullet-1
Entering the correct password for the Wi-Fi network and press set Scan the QR code in front of the camera untill it sounds once The system starts connecting to Wi-Fi network.

Step 3 Setting
Set the name of your camera Tap the icon of the Camera to enter the operation page.

Make a successful ChowCAM setup with your home Wi-Fi
Suggest to bring the ChowCAM device close to the home Wi-Fi router as near as possible to receive the best Wi-Fi signal. And make sure the home Wi-Fi source is 2.4G from the router not 5G, also must enter the correct password for the home Wi-Fi to complete the setup. After the ChowCAM has been successfully connected to your home Wi-Fi, you may combine the image output with your automation system to start operating.

Operation page

1. Name of the device
2. Setting
3. Owner/Manager/User
4. Recorded Video (only with Micro SD card) Speaker
5. Mic
6. Rotation
7. Motion detection

Owner shares the ChowCAM to other users

1. Press the icon on the corner to enter the account management page.
2. Tap the manage shared device.
3. Enter the account which you are going to share.
4. Choose the device you are going to share and tap next.
   •  The Owner can decide the permission of device sharing. A manager can share and operate this device, but a normal user can only operate it.
   • One ChowCAM can only be shared to 10 users.

Push notification

1. Press the icon on the corner to enter the account management page.
2. Tap the push notification setting.
3. Turn ON the switches of the notification.
   • Please go to the settings page of your smartphone, find TMT Chow! and allow the notifications.

FAQ

Question 1
How to reset ChowCam-BULLET 1 to default setting?

Answer 1

1. Press the ChowCam-BULLET 1 icon on the main page of the Chow! App for 3 seconds
2. Delete the ChowCam-BULLET 1 icon from the App
3. Press the reset button of the ChowCam-Bullet-1 untill it sounds once.

Question 2
Can not finish the Wi-Fi connecting countdown.

Answer 2

1. The system can not connect with None-English SSID/Wi-Fi network.
2. Make sure the antenna is well connected.
3. Make sure the Wi-Fi signal is strong (above -60dBm).
4. Please connect BULLET 1 to the Wi-Fi around your home router.
5. Make sure the Wi-Fi you selected is 2.4GHz.
6. Make sure you entered the Wi-Fi password correctly.

Question 3
Can not see the view after BULLET 1 has already completed the Wi-Fi connection.

Answer 3

1. Make sure your Wi-Fi is functional.
2. Un-plug and reconnect the power plug of BULLET 1.
3. Check if you enter the PIN code at the device page.

Question 4
LED indication

Answer 4
Orange light ON – wait untill the orange light goes OFF. Orange LED and green LED blink alternatively – ready for Wi-Fi connection. Green LED ON – BULETT 1 already connected to Wi-Fi

References

• TMT AUTOMATION INC.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>