TMT Automation Dome2 Wireless Outdoor IP Camera User Guide

TMT Automation Dome2 Wireless Outdoor IP Camera

Introduction of the ChowCAM-Dome2
Dome2 is a device which can be integrated with Chow! App and Chow’s devices. Dome2 will provide a live view of the site which allows you to check the environment before operation. With a micro SD card, Dome2 can record each operation and movement for future review.

Product overview

LED light status

Kit contents

Specifications

General installation

1. Connect the Dome 2 with the power wire.
2. Connect the power wire with the adaptor.
3. Connect the adaptor to the socket.

Apply for a new Chow! account

1. Please scan the QR code and download the Chow! App
2. Press sign up icon and press the agree icon to continue
3. Please type the following information for registration:
   • a. Email (enter twice for verification)
   • b. Password (enter twice for verification)
   • c. The password should have at least 1 English character and at least 8 characters in total
4. The system will send a link to your email when the registration succeeded.
5. Please go to your email, and click the link to activate your Chow! account.
6. Please log in to your Chow! account.

Connect DOME 2 to Chow! App

1. Step 1 Add a new ChowCam-DOME 2
   Tap the (+) icon to add a new device New device -> Accessories -> ChowCam-DOME 2
   Tap the (Scan QR code) icon Follow the indications as below:

2. Step1-Power the device

3. Step 2 – Reset the device

4. Step 3-ChowCam-DOME 2 sound once when it has been reset

5. Step 2 Connect ChowCam-DOME 2
   Entering the correct password for the Wi-Fi network and press set Scan the QR code in front of the camera untill it sounds once The system starts connecting to Wi-Fi network.

6. Step 3 Setting
   Set the name of your camera Tap the icon of the Camera to enter the operation page.

Operation page

1. Name of the device
2. Setting
3. Owner/Manager/User
4. Recorded Video (only with Micro SD card)
5. Speaker
6. Mic
7. Rotation
8. Motion detection

Owner shares the ChowCAM to other users

1. Press the icon on the corner to enter the account management page.
2. Tap the manage shared device.
3. Enter the account which you are going to share.
4. Choose the device you are going to share and tap next.
   • a. The Owner can decide the permission of device sharing. A manager can share and operate this device, but a normal user can only operate it.
   • b. One ChowCAM can only be shared to 10 users.

Push notification

1. Press the icon on the corner to enter the account management page.
2. Tap the push notification setting.
3. Turn ON the switches of the notification.

FAQ

• Question 1
  How to reset DOME 2 to default setting?
  Answer 1

1. Delete DOME 2. on the Chow! APP by sliding the DOME 2. iconand press the delete icon.
2. Press the reset button for 10 seconds until DOME 2.

• Question 2
  Can not see the view after DOME has aiready completed the Wi-Fi connect ion.
  Answer 2

1. Make sure your Wi-Fi is functional.
2. Un-plug and reconnect the power plug of DOME 2.
3. Check if you enter the PIN code at the device page.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>