ABQINDUSTRIAL 215026 MTM-15 Torque Multipliers Instruction Manual
- June 13, 2024
- ABQINDUSTRIAL
Table of Contents
MTM 15 Operating Manual
215026 MTM-15 Torque Multipliers
Tightening or loosening using a torque wrench
-
a. Insert the reaction lever into the multiplier head. The pin on the multiplier head should fit securely in the hole on the reaction lever. 1b. Or, insert the right angle reaction bar and reaction base into the multiplier head. The pin on the multiplier head should fit securely in the hole on the reaction bar.
-
Starting from nut, insert: socket, multiplier and torque wrench.
-
The reaction lever must be positioned against an object so it cannot move. The multiplier can work both clockwise and counterclockwise. Pay attention that the reaction lever is fixed in the correct way.
-
Using the torque wrench, apply continuous force until the application is tightened or loosened satisfactorily.
Note: The torque output of the multiplier is based on a torque multiplication ratio of the torque applied from the torque wrench. The torque multiplication for MTM-15 is 6.5:1 -
After you have finished tightening, the torque wrench must be released slowly to ease the multiplier accumulated energy.
Break-Away Adapter for MTM-15
- The MTM-15 case set includes a break-away safety adapter.
| The break-away safety adapter is inserted into the square opening of the
torque multiplier.
---|---
Use the hex key by turning it left to tighten the fixed balls and firmly
connect the breakaway safety adapter to the torque multiplier.
In case of an overload, the break-away safety adapter will break and let the
user
know an overload has occurred.
Use the hex key and turn it right to remove the parts of the break-away safety
adapter
that still remain in the torque multiplier.
Mountz Calibration & Repair Services
Mountz Inc. features an experienced calibration and repair staff. Our trained
technicians can calibrate and repair most any tool. Mountz provides rapid
service with quality that you can trust as we offer three state-of-the-art
calibration lab and repair facilities that can calibrate up to 20,000 lbf.ft.
Since 1965, Mountz’s in-depth knowledge of torque is reflected in our tool’s
craftsmanship and our ability to provide soul-tions to both common and
uncommon torque applications. We perform calibrations in accordance with
ANSI/NCSLZ540. Mountz is dedicated solely to the manufacturing, marketing and
servicing of high quality torque tools.
Tool Service & Repair Capability
- Torque Wrench Calibration: Click Wrench, Dial Torque Wrench, Beam Wrench, Cam-Over & Break-Over Wrench
- Torque Screwdrivers: Dial, Micrometer, Preset & Adjustable
- Torque Analyzers/Sensors: All brands
- Electric Screwdrivers: All brands
- Air Tools: All brands Impact Wrenches, Drills, Pulse Tools, Grinders, Percussive Tools, Controlled Nutrunners
- Torque Multipliers: All brands
Mountz Torque Testers and Calibration Equipment
Torque tools go out of calibration with use. Calibrating a torque tool is a
fine-tuning process of bringing the tool back within its tolerance. Torque
testers can also be used for quick tools tests on the line or in the lab to
determine whether torque tools are holding a given setting.
A regular torque tool calibration and re-calibration guarantees the operator
repeatable accuracy and adherence to international standards. Torque testing
also ensures torque equipment is operating to peak per-romance and can
highlight potential tooling problems before they arise perhaps due to tool
wear or broken components.
Controlling torque is essential for companies to ensure their product’s
quality, safety and reliability isn’t compromised. The failure of a three-cent
fastener that isn’t properly tightened can lead to catastrophic or latent
failures. Fasteners that are insufficiently torqued can vibrate loose and
excessive torque can strip threaded fasteners. Using a quality torque tool has
become increasingly important for many companies to ensure that proper torque
is being applied and maintains gauge require-mints associated with the ISO
9001 Quality Standard. Look for the Mountz hexagon logo – it’s a stamp for
quality tools, service and know-edge in the field of torque control.
MTM 27 Operating Manual
MTM hand torque multiplier is a low cost solution that’s ideal for wheel
nuts and remote locations where air and electricity aren’t easily accessible.
The gearing design allows for a high torque output with minimal input.
Commonly used in petrochemical, power generation, transportation, shipping and
maintenance industries.
Tightening or loosening using a torque wrench
-
a. Insert the reaction lever into the multiplier head. The pin on the multiplier head should fit securely in the hole on the reaction lever. 1b. Or, insert the right angle reaction bar and reaction base into the multiplier head. The pin on the multiplier head should fit securely in the hole on the reaction bar.
-
Starting from nut, insert: socket, multiplier and torque wrench.
-
The reaction lever must be positioned against an object so it cannot move. The multiplier can work both clockwise and counterclockwise. Pay attention that the reaction lever is fixed in the correct way.
-
Using the torque wrench, apply continuous force until the application is tightened or loosened satisfactorily.
Note: The torque output of the multiplier is based on a torque multiplication ratio of the torque applied from the torque wrench. The torque multiplication for the MTM-27 is 3.3:1 -
After you have finished tightening, the torque wrench must be released slowly to ease the multiplier accumulated energy.
Mountz Calibration & Repair Services
Mountz Inc. features an experienced calibration and repair staff. Our trained
technicians can calibrate and repair most any tool. Mountz provides rapid
service with quality that you can trust as we offer three state-of-the-art
calibration lab and repair facilities that can calibrate up to 20,000 lbf.ft.
Since 1965, Mountz’s in-depth knowledge of torque is reflected in our tool’s
craftsmanship and our ability to provide soul-tions to both common and
uncommon torque applications. We perform calibrations in accordance with
ANSI/NCSLZ540. Mountz is dedicated solely to the manufacturing, marketing and
servicing of high quality torque tools.
Tool Service & Repair Capability
- Torque Wrench Calibration: Click Wrench, Dial Torque Wrench, Beam Wrench, Cam-Over & Break-Over Wrench
- Torque Screwdrivers: Dial, Micrometer, Preset & Adjustable
- Torque Analyzers/Sensors: All brands
- Electric Screwdrivers: All brands
- Air Tools: All brands Impact Wrenches, Drills, Pulse Tools, Grinders, Percussive Tools, Air Screwdrivers, Nutrunners, DC Controlled Nutrunners
- Torque Multipliers: All brands
Mountz Torque Testers and Calibration Equipment
Torque tools go out of calibration with use. Calibrating a torque tool is a
fine-tuning process of bringing the tool back within its tolerance. Torque
testers can also be used for quick tools tests on the line or in the lab to
determine whether torque tools are holding a given setting.
A regular torque tool calibration and re-calibration guarantees the operator
repeatable accuracy and adherence to international standards. Torque testing
also ensures torque equipment is operating to peak per-romance and can
highlight potential tooling problems before they arise perhaps due to tool
wear or broken components.
Controlling torque is essential for companies to ensure their product’s
quality, safety and reliability isn’t compromised. The failure of a three-cent
fastener that isn’t properly tightened can lead to catastrophic or latent
failures. Fasteners that are insufficiently torqued can vibrate loose and
excessive torque can strip threaded fasteners. Using a quality torque tool has
become increasingly important for many companies to ensure that proper torque
is being applied and maintains gauge require-mints associated with the ISO
9001 Quality Standard. Look for the Mountz hexagon logo – it’s a stamp for
quality tools, service and know-edge in the field of torque control.
Distributed by: ABQ Industrial LP USA
Tel: +1 281-516-9292 /
888-275-5772
Fax: +1 866-234-0451
Web: https://www.abqindustrial.net
E-mail: [email protected]