Shenzhen xinlangrui electronic XINOWY V6 Helmet Bluetooth Earphone User Manual

Shenzhen xinlangrui electronic XINOWY V6 Helmet Bluetooth Earphone User

Manual

V6

Product Function

V6 is a performance stable Helmet Bluetooth Intercom. Maximum  talking distance is1500 meters, in general, at outdoor environment  the talking distance is 500 meters t01500 meters. At same time, it is  also as high performance bluetooth headset (range of 50 meters).

It has functions of automatic-receive phone calls, using more  convenient and safe. Using newest production process and ultrasonic structure without screw, also it has functions of waterproof, HD-Voice. Designed for motorcycle riders, making sure  safely riding.

The installation diagram

Operation of Phone

1. Power on/Power off
   Power on: Long press MOTOR button about 2s then release, main device light flash.
   Power off: Press Power off.

2. Connect with phone (GPS/MP3)
   Long press Phone button 5s, until red & blue light flash. Turn on phone bluetooth and search bluetooth to connect V6, pairing  successfully, intercom’s blue light flash. (If GPS/MP3 support bluetooth function, same operation way with phone)

3. Last number redial
   After connecting phone, long press Phone button 3s, device will  automatic dial phone of the final phone calling number.

4. Receiving a call
   When comes a call, without operation 5s, phones will automatic receive.

5. Refuse a call
   When comes a call, press Phone button to end call.

6. Play/Suspend music
   Short press Phone button (95% compatible with cellphone music play).

7. Volume control
   Add volume: Press Volume +
   Down volume: Press Volume –

8. Choose music
   Previous music: Long press Volume + for 2s
   Next music: Long press Volume – for 2s

9. Charging tip
   When charging, the red light is always on, after the full charge, the red light is off.

10. Clear pairing (Restore factory settings)
    Press Phone button and B button at the same time, the indicator light flashes red three times and blue once.

Operation of Intercom

V6 support six riders use device, two riders talk at the same time, one main device are pair with 5 sub-devices, the main device can choose one to talk from AB/C/D/E sub-devices.

Attention: The main device can not talk with other 5 devices at same time, it is choose one sub-device to talk. Choose from A/B/C/D/E, press main device’s MOTOR/B/C/D/E button to switch, realize two riders talking. The other five sub-devices cannot talk between with each other.

1. Pairing with A device
   Long press the MOTOR buttons of main device and A device about 5s together, both device red & blue lights flash. After both of them find each other, one of them will automatically initiate a pairing connection, and the blue light will flash quickly. After a while, the blue light flashes slow simultaneously, two devices can normal talk.
   To pair the next sub-machine, press the MOTOR buttons first to disconnect.

2. Pairing with B device
   Long press the B buttons of main device and B device about 5s together, both device red & blue lights flash. After both of them find each other, one of them will automatically initiate a pairing connection, and the blue light will flash quickly. After a while, the blue light flashes slow simultaneously, two devices can normal talk. To pair the next sub-machine, press the B buttons first to disconnect.

( C device, D device and E device have same pair way as above, pairing relative C button, D button and E button. ) Simply saying: The MOTOR/B/C/D/E buttons on the main device are for pairing with the MOTOR/B/C/D/E buttons on five other subdevices. After pairing, press Corresponding pairing buttons of main device to talk with other five subdevices.

Eg: When the main device needs to talk to the A sub-device, press the MOTOR button of the main device to connect and talk. If the main device needs to talk to the sub-device B, press the B button of the main device to switch and talk. C/D/E has the same way of operation as above.

Note: The next time use it, don’t need to pair it again, just click the MOTOR/B/C/D/E buttons on the main device to connect and talk.

Parameters

Precautions for use

1. Please install correctly, under raining situation, making sure headphone jack to fully inserted state with devices, to prevent the devices into the water.
2. In order to ensure the battery life, please use the standard charger.
3. In order to ensure the safety of riding, don’t recommended to listen music in riding.
4. In the riding state, do not to manually operate the device button, pay attention to safety.
5. In order to ensure the communication distance, it is recommended to use in an open areas.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to fry to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void  the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>