Shenzhenshi Aipaisi Technology B08JGKZ3BV Wireless Charging Mouse Instructions
- June 6, 2024
- Shenzhenshi Aipaisi Technology
Table of Contents
Feature Of Product:
Wireless charging mouse
Three-speed DPI one-key switching adjustment 2.4Ghz wireless solution, energy-
saving and power-saving The mouse has a built-in 400 mAh large-capacity
battery, which can be recharged and used, which is more economical and
environmentally friendly!
Installation Notes:
Step 1: Pull out the NANO receiver at the bottom of the mouse and plug it
into the USB port of the computer;
Step 2: Turn on the power switch at the bottom of the mouse, pair the
mouse with the computer (normal pairing time is 10-30 seconds), and it can be
used if the pairing is successful;
Part 3: When the mouse sleeps, it can be used by moving the mouse or
pressing any key.
Instructions for use and precautions:
- The mouse can be fully charged in 2-3 hours, and the charging supports computer USB interface, mobile phone charging head, and mobile power supply;
- Mouse switch description: OFF=turn off the power ON=turn on the power+mouse light LED=switch the light mode/turn off the light;
- When the mouse cursor moves slowly or the mouse light is dimmed or stuck, please check whether the battery power is insufficient, and it is recommended to charge it in time;
- When the mouse cannot be connected, please check whether the power at the bottom of the mouse is turned on, or move the NANO receiver to another device to reconnect;
- When you do not use the mouse for a long time, it is recommended to turn off the power to save battery power and avoid battery consumption. (Note: When charging this mouse, the power must be turned on to be charged normally)
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions (1)this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>