KAWA S5 HD Video Wireless Baby Monitor User Manual
- June 8, 2024
- KAWA
Table of Contents
- Box Contents
- Monitor Features
- Camera Features
- Monitor Charging Method
- Camera Power Supply Method
- Camera Installation Methods
- Add Camera to the Baby Monitor
- Display Mode of Screen
- Full Screen
- Warning Explain
- Certification
- Declaration Of Conformity
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
USER MANUAL
HD Video Wireless Baby Monitor
Model:S5
Dear KAWA Customer,
Thank you for your trust in KAWA! In order to continuously
improve the quality of our products and services and provide you with better
products and services, please send us an email with the theme of “Product
Experience Feedback”, leaving your valuable comments and suggestions and
including your purchase order number.
You Will Get
- An extension of the warranty by one year.
- 10% off coupon for purchase of any new KAWA products.
Please contact: support@kawa-in.com
Box Contents
Monitor Features
- Menu Button:
- Short press the(Menu] to pop up the menu.
- Short press the(Menu] to close the menu and return to the home page.
- Hold the button: take a picture and save it to the memory card (please insert the memory card first).
- Return to previous level of menu/Talk button:
- Short press the (return menu / Talk intercom] button in the menu bar and return to the superior menu.
- in any interface, long press (return to the last menu / Talk intercom] button to achieve voice intercom.
- OK key / Zoom Key: 1) Click the [OK] button to enter the Camera Setting in the disconnected interface.
- For function selection, press the (OK) key to confirm the selection.
- When connecting multiple cameras and the monitor is in multi-screen display mode, press the “OK” button for 2 seconds to switch monitoring screen.
- When the monitoring screen is displayed, briefly press this button to switch 1.5x, 2x, and 4x zoom and turn off zoom.
- Up key / brightness + key
- Down key / brightness – key
- Left key / volume – key
- Right key / volume + key
- In the menu option state, press the up, down, left and right keys for menu selection.
- When the monitoring screen is displayed, press the brightness + and brightness – keys to adjust the brightness of the display screen.
- When the monitoring screen is displayed, press the volume + and volume – keys to adjust the volume of the display screen.
- Power indicator of Monitor (Red: In Charge Green: Full Power)
- Volume indicator of Camera:
- Green: baby’s exposure to low-level environmental noise.
- Yellow: baby’s exposure to moderate-level environmental noise, please check whether the baby is safe.
- Red: baby’s exposure to high-level environmental noise, please check whether the baby is safe.
- Power button: Long press for 3 seconds to power on / off, short press to switch on / off the monitor screen.
- Reset Button
- M i ro phone
- pea ker
- Display Screen
- Support Stand / Back clip
- Handle
- Monitor TYPE-C Port
Camera Features
- Wide-Angle Lens
- Microphone
- Camera Power LED Statu: Indicator
- Camera Antenna
- Speaker
- Camera Pairing Button
- Camera Micro USB Port
- Micro SD Card Slot
Monitor Charging Method
Please fully charge the Monitor before using. Charging method:
- Connect one end of the TYPE-C(1m) cable to the Baby Monitor,and the other end to the power adapter (5V 2A).
- Plug the adapter into a power outlet.
Camera Power Supply Method
- Connect one end of the Micro USB (2.6m) cable to the camera, and the other end to the power adapter (5 V 1A).
- Plug the adapter into a power outlet. After powering the Camera and fully charging the Monitor, you can enjoy the video baby monitor.
Camera Installation Methods
- Select a position with a wide viewing angle and place the camera directly.
- Installation on the wall (optional)
- Tear off the positioning paper and stick it to the selected location.
- For a wooden wall, drive a screw directly into the area covered by the paper.; for a concrete wall, drill a hole on the area and insert a bolt before tightening the screw into the wall.
- Align the guide rail at the bottom of the camera with the screw and push the camera horizontally to lock it onto the wall.
Note: Please adjust the height and depth while tightening the screws to ensure that the camera is installed correctly.
Add Camera to the Baby Monitor
Baby Monitor and Baby Camera are paired out of the box. Please refer to the following steps when adding additional Baby Cameras or after resetting a Baby Camera: Please make sure the Baby Monitor and the Baby Camera matches the same version.
- Press the [MENU] button to open the menu , select “Camera Setting” → ” Camera Pairing”, press [OK] to add Camera.
- Press the pair button on the back of the Camera for seconds until you hear the ticking prompt.
Note: If you restore the initial plant settings, press the OK button in
the “Please add a camera” interface to add Camera.
WARNING! After the Monitor and Camera are successfully connected, please
avoid using the Monitor and Camera close to each other, otherwise it may cause
howling.
Display Mode of Screen
When you add more than two Baby Cameras, you can manually and automatically switch camera screen.
- Manual switching: Long press the (OK 1 button, the screen will be switched to the next screen. The icon of the camera you select will display.
- Automatic switching (Muti-Camera Cycling): select “Camera Setting” -> “Display made -> -Muti-Camera Cycling option. The screen cycles through the list of connected Baby Cameras according to pre-set intervals.
Full Screen
This mode allows you to see one camera in full-screen view.
Monitor Menu Settings & Icons Descriptio
Menu settings
Press the [MENU] button on the Monitor to display the functional interface, as shown below:
Monitor Mode
VOX Mode—when you turn on the VOX mode, the screen will be turned on
automatically if the noise is detected above your pre-set level. VOX
Threshold-1-5 thresholds are optional. Audio Only—Select “Audio Only”, monitor
display turns off, but you’ll hear audio from your camera(s).
Alert
Sound Alert—You can set the Baby Monitor to alert you when a specific noise
level is detected.
Note: Surrounding noise might set off false alarm. Alarm Duration —S Sec,
10 Secs, 20 Secs and 30 Sea are optional.”10 Sea” by default. The monitor will
alert continuously according to the alert duration you set
Alarm Volume-1-3 volume are optional, “2” by default. Note: When the Monitor
paired more Cameras, if you set volume 1 which means all paired cameras are
volume 1. Key Note: The interval duration between each sound alarm is 5
seconds. It will not alert during this interval even there is alert trigger
condition.
Lullaby
Monitor white noise—For adults to have a good sleep.Select the white noise you
want, and press the volume + and volume – keys to adjust the volume while the
monitoring screen is displayed. Camera Lullaby—Comfort baby.Select your
desired lullaby song. You can adjust the volume by pressing the “-/+” volume
button.
Note: Alert is automatically disabled after enabling the lullaby
function.
Warning: The sound of lullabies may mask the baby’s cry.
Clock Reminder
Feeding, Diaper Changing.. Other Off. 1H, 1.5H, 2H, 2.5H, 3H, 3.5H, 4H and
custom are optional. Description: 1. Off indicates that the timing reminder
function is off. 2.1H, 1.5H, 2H, 2.5H, 3H, 3.5H, 4H indicates a reminder
timing function after 1,1.5, 2, 2.5, 3, 3.5, 4 hours.(e.g.When you choose
“Feeding” -> “3H”, means that the alarm clock will remind you to feed after 3
hours ) 3. Custom: You can set the clock according to the time you need.
Camera Settings
Camera Pairing-1. Add Camera(Note: You can add up to 4 cameras per baby
monitor.) 2. Delete Camera
Display Mode —Full screen, cycle cameras. Note: When multiple cameras are
connected and set to “cycle cameras”, the monitor will cycle through the list
of connected baby monitors according to the pre-set interval. Video Screen
Setting—”Normal” by default.when the camera is inverted for mounting, select
the corresponding camera first, select “Rotate 180°”, and then press “OK” to
complete the setting. Record Mode —No Record, Cyclic Recording(when motion
detected), Cyclic Recording. Select ‘No Record’ : it means that the video will
not be recorded, and it won’t be stored in the micro SD card. Select ‘Cyclic
Recording(when motion detected)’ : It means that recording starts when motion
detected. “Cycle” means that when the micro SD card fills up, the earliest
videos will be gradually and automatically deleted to store the latest video.
Select ‘Cyclic Recording’ : it means that the video will keep recording
circularly, no matter the motion detected or not. Please use a 166B–128GB
Micro SD card with data rate of Class 10 or above. Time Stamp—If the Time
Stamp is enabled, the recorded video will contain the time information. In
some cases, it can be used as video evidence. Status of micro SD card —Show
more details of the micro SD card. You can select ‘format’ to format the micro
SD card. Cautious! Formatting will delete all files in the micro SD card and
cannot be recovered.
More Settings
Night Vision Mode—Automatic and close are optional. When set to “Auto”, camera
automatically switches the screen color according to the light condition in
the room.
Note: If the night vision mode is set to “Close”, the Monitor will stick
to daylight screen color and will not change when the surrounding environment
is getting dark.
Time Setting—Set the monitor system time. Sleep Mode—Off, lmin,3mins and 5mins
optional. Enable to automatically turn off the screen after 1min, 3mins or
5mins. If you select “Off’, the screen won’t sleep automatically. Language
Setting—Set the monitor display language. Anti-Screen Flicker—If the baby
monitor’s screen is flickering, change to the other Anti-Screen Flicker mode.
Illumination source frequency: 50Hz and 60Hz optional. Please select the
approiate frequency of the lighting source. Default Settings—Resets all
options to their default setting. Version Information—Display Monitor version
number, Camera version number, Monitor SN number, Camera SN number.
2. Small icons description
Warning Explain
WARNING STRANGULATION HAZARD: Cords can strangle children.Keep cords out of the reach of children (more than aft (0.9m) away).
Certification
** This device complies with the radio interference requirements C. of the
European Community. Hereby, KAWA ELECTRONICS COMPANY LIMITED declares that the
radio equipment type Baby Monitors $5 is in compliance with Directive 2014/
53/EU.The full text of the EU declaration of conformity is available at the
following internet address: www.kawa-in.com The
product shall only be connected to a USB interface of version USB2.0 or higher
and that the connection to a power USB is prohibited.
Caution:** For Adapter: Shall be installed near the equipment and shall be
easily accessible. For Battery: Risk of explosion battery is replaced by an
incorrect type, dispose of used batteries according to the instructions. To
prevent possible hearing damage, do not listen at high volume levels for long
periods. Only can use the adapter as below: S5-M: Rated Input & Output:
AC100V-240V, 50/60Hz, 200mA, DCS.OV, 2A. $5-C: Rated Input & Output: AC100V-
240V, 50/60Hz, 200mA, DC5.0V, 1A. Manufacturer: KAWA ELECTRONICS COMPANY
LIMITED Model Name: Baby Monitor 55 The plug could be disconnected from
adapter.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body. This device contains
licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science
and Economic Development \Canada’s licence-exempt RSS(s). Operation is subject
to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device. L’imetteur/reicepteur exempt de
licence contenu dans le present appareil est conforme aux CNR d’Innovation,
Sciences et Developpement economique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisee aux deux conditions suivantes
:
S5-M: FCC ID:2AZWZ-S5M IC:27280-S5M 55-C: FCC ID:2AZWZ-S5C IC:27280-S5C
Declaration Of Conformity
- Please use the standard AC Power Chargers and Charging Cables.
- Do not use the device in an environment where the temperature is too high or too low, and do not expose the device to strong sunlight or an environment that is too humid.
- The suitable ambient temperature for 55-M and accessories is -10°C to +50°C.
- The suitable ambient temperature for S5-C and accessories is -10°C to +50°C.
- when charging, please place the device in a well-ventilated environment with normal room temperature. It is recommended to charge the device within the temperature range of 0°C-45°C.
**** This product is designed and manufactured with high quality materials
and components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling helps protect natural resources, human health
and the environment. For more information on disposal and recycling of this
product, contact your local municipality, disposal service, or the shop where
you bought this product.
Warranty: 12-month limited warranty
Manufacturer: KAWA ELECTRONICS COMPANY LIMITED
Email: support@kawa-in.com
Web: www.kawa-in.com
Address: FLAT A 21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG
KONG
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>