Silk n HDB1PE1001 Silky Air Pro Brushless Hair Dryer User Manual

: June 13, 2024
: Silk n

Silk n HDB1PE1001 Silky Air Pro Brushless Hair Dryer User Manual

Silk n HDB1PE1001 Silky Air Pro Brushless Hair Dryer User
Manual

Silk n HDB1PE1001 Silky Air Pro Brushless Hair Dryer User Manual - Product
Overview

Legal notice
Invention Works B.V. reserves the right to make changes to its products or specifications to improve performance, reliability, or manufacturability. Information furnished by Invention Works B.V. is believed to be accurate and reliable at the time of publication. However, Invention Works B.V. assumes no responsibility for its use. No license is granted by its implication or otherwise under any patent or patent rights of Invention Works B.V.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Invention Works B.V. Data is subject to change without notification.

Silkn Beauty Ltd. has patents and pending patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property rights except as expressly provided in any written agreement from Silkn Beauty Ltd. Specifications are subject to change without notice.

Silk’n and the Silk’n logo are registered trademarks of Silkn Beauty Ltd. Invention Works B.V. Galileïstraat 17, 3029 AL Rotterdam, The Netherlands www.silkn.eu info@silkn.eu

1 Package contents/device parts

Air outlet
Cool shot button
Handle
Mains cord
Speed button
Temperature button
On/off switch
Display
Cool air indicator
Temperature indicator
Speed indicator, 3× 12 Lock icon 13 Concentrator 14 Diffuser

2 General information

2.1 Reading and storing the user manual

This user manual accompanies this hair dryer Silky Air Pro (hereafter referred to as the “product”), and contains important information on setup and handling. Before using the product, read the user manual
carefully. This particularly applies to the safety instructions. Failure to do so may result in personal injury or damage to the product. The user manual is based on the standards and rules in force in the European Union. When abroad, you must also observe country-specific guidelines and laws. Store the user manual for further use. Make sure to include this user manual when passing the product on to third parties.

2.2 Explanation of symbols

The following symbols and signal words are used in this user manual, on the product or packaging.

WARNING!
This signal symbol/word designates a hazard with a moderate risk, which may result in death or severe injury if not avoided.
NOTICE!
This signal word warns of possible damage to property.

Silk n HDB1PE1001 Silky Air Pro Brushless Hair Dryer User Manual -
Explanation of symbols

3 Safety

3.1 Proper use

The product is exclusively designed for drying and styling human hair. It is only intended for private use and not suitable for commercial purposes. Only use the product as described in this user manual. Any other use is considered improper and may result in damage to property or persons. The manufacturer cannot be held liable for damages or injury incurred through improper or incorrect use.

3.2 Safety instructions

WARNING! RISK OF ELECTRIC SHOCK!

Only connect the product if the line voltage of the socket corresponds to the data on the rating plate.
Only connect the product to an easily accessible socket so that you can quickly disconnect it from the mains supply in the event of a problem.
Do not use the product if it is damaged or if the mains cord or plug is defective.
If the mains cord of the product is damaged, the manufacturer, the customer service team or a person with similar qualifications must replace it to avoid risks.
Do not open the housing; instead, have a qualified professional perform repairs. Contact the customer service team for this. Liability and warranty claims are waived in the event of repairs performed by the user, improper connection or incorrect operation.
Only parts that comply with the original device data may be used for repairs. This product contains electrical and mechanical parts which are essential for providing protection against sources of danger.
Do not immerse the product or the mains cord in water or other liquids.
Never touch the mains plug with wet or damp hands.
Keep the product away from water! Do not use the product near or over water contained in baths, washbasins, sinks, etc.
Do not place the product such that there is a risk of it falling into a tub or sink.
Do not reach for the product if it has fallen into water. Unplug immediately before retrieving it. Failure to unplug the product EN may result in an electric shock.
Always switch the product off when you are not using it, when you intend to clean it, or in the event of a malfunction.
Never insert any objects into the housing.
Do not pull the product out of the socket by the mains cord; instead, always pull it out by the plug itself. Never move, pull, or carry the product by the cord.
Keep the product away from open flames and hot surfaces.
Lay the mains cord so that it does not pose a tripping hazard.
Do not kink the mains cord, wrap it around the product, or lay it over sharp edges.
Only use the product indoors.
Do not use an extension cord with the product.
When the product is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the product is switched off.
For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
WARNING! RISK OF INJURY!
The product can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved.
Children must not play with the product.
Cleaning and user maintenance must not be performed by unsupervised children.
Keep children under 8 years of age away from the product and mains cord.
Do not leave the product unattended while it is plugged in.
Make sure that children do not play with the plastic wrapping. They may get caught in it when playing and suffocate.
This product reaches high temperatures and is not suitable to be used on either synthetic or real hair extensions.
The product heats up during use. Always hold it by its handle when it is hot. Do not touch the hot surfaces of the product or let them come into direct contact with the skin.
Do not apply hair spray when the product is switched on. This is a fire hazard.
Keep sufficient distance from all flammable EN objects, e.g. curtains and drapes.
Do not use outdoors or operate where aerosol products are being used or where oxygen is being administered.
Always allow the product to cool down before storing or cleaning.
NOTICE! RISK OF DAMAGE!
Place the product on an easily accessible, level, dry, heat-resistant and sufficiently stable surface. Do not place the product on the edge of the surface.
Ensure that the mains cord does not come into contact with hot parts.
Never attempt to clean the product by immersing it in water and do not use a steam cleaner to clean it.

4 Checking the product and package contents

NOTICE! RISK OF DAMAGE!

If you are not cautious when opening the packaging with a sharp knife or other pointed objects, you may quickly damage the product. Be very careful when opening it.

Take the product out of the packaging.
Check to make sure that all parts are included (see Fig. A).
Check whether the product or individual parts are damaged. If this is the case, do not use the product. Contact our customer service.

5 Operation

Clean all parts of the product before first use as described in the chapter “Cleaning”.
The product may emit a slight smell when it is first used. This is entirely safe and harmless. Ensure there is adequate ventilation in the room.
Always hold onto the handle 3 when using the product.

Connect the mains cord 4 to an easily accessible mains socket.
If necessary, attach one of the attachments (concentrator 13 or diffuser 14 ) to the air outlet 1 (see Fig. B). The attachments magnetically fix to the air outlet.
To switch the product on, slide the on/off switch 7 to the middle position (ON).
To change the operating temperature, press the temperature button 6 repeatedly until the desired temperature (39, 55, 65, 75, 85 or 98 °C) is selected. The operating temperature shows in the temperature indicator 10 of the display 8 .
To change the operating speed, press the speed button 5 repeatedly until the desired speed (3 levels) is selected. One or more speed indicators 11 illuminate to show the selected speed level (13).
For a shot of cool air, press and hold the cool shot button 2 . The cool air indicator 9 illuminates when the function is activated. Release the button to cancel this function.
To lock the selected temperature and speed, slide the on/off switch to the top position ( ). The lock icon 12 illuminates when the function is activated.
To switch the product off, slide the on/off switch to the bottom position (OFF). The product remembers the last temperature and speed for your next use.

6 Cleaning

WARNING! RISK OF INJURY! · Always disconnect the mains cord and let the product completely cool down before cleaning.

NOTICE! RISK OF DAMAGE!

Never immerse the product in water or other liquids. Make sure that no water or other liquids penetrate the housing.
Do not use any aggressive cleaners, brushes with metal or nylon bristles, or sharp or metallic cleaning utensils such as knives, hard scrapers and the like.

Clean the product with a damp cloth.
Dry the product thoroughly with a soft and clean cloth.

6.1 Internal cleaning

With this function, the motor operates in reverse direction to draw air from the air outlet 1 and clean the internal parts of the product with cool air.
Only use this function periodically. Overuse may damage the product.

Connect the mains cord 4 to an easily accessible mains socket.
Within 10 seconds, press and hold the temperature button 6 and speed button 5 at the same time for about 3 seconds to activate the internal cleaning mode. The product operates in reverse direction for about 10 seconds before stopping automatically.
If necessary, repeat step 2 to activate this function again. You can only activate this function 3 times at a time. To enter the internal cleaning mode again, you must unplug the product and start over again. 12

7 Storage

All parts must be completely dry before being stored. Store the product in a clean and dry place, avoiding heat and direct sunlight.

8 Troubleshooting

Some problems may be caused by minor faults that you can fix yourself. To do so, follow the instructions in the following table. If it is still not possible to resolve the problem, contact customer service. Do not repair the product yourself.

Silk n HDB1PE1001 Silky Air Pro Brushless Hair Dryer User Manual -
Troubleshooting

9 Technical data

Model: HCA01
Voltage: 220–240 V, 50/60 Hz
Power: 1,600 W
Motor speed: 110,000 rpm
Max. air speed: 76 km/hr
Noise level: ≤ 75.7 dB (30 cm)
Weight: approx. 676 g (EU), 715 g (GB)

10 Disposal

10.1 Disposing of the packaging

♻ Sort the packaging before you dispose of it. Dispose of paperboard and cardboard with the recycled paper service and wrappings with the appropriate collection service.

10.2 Disposing of the product

(Applicable in the European Union and other European countries with separate collection systems of recyclable materials)
Old appliances may not be disposed of in household waste! Should the product no longer be capable of being used at some point in time, dispose of it in accordance with the regulations in force in your city or county. This ensures that old appliances are recycled in a professional manner and also rules out negative consequences for the environment. For this reason, electrical equipment is marked with the symbol shown here.

11 Warranty

This product is covered by a 2-year warranty according to European regulations and law. The extent of the warranty on this product is limited to technical defects caused by faulty production processes. In the event you want to claim warranty please be sure to contact our customer service for instructions. They may be able to solve your problem without needing to return the product to the store or our service center. Our customer service is always pleased to help you!

12 Customer service

For more information about the products of Silk’n visit your regional Silk’n website: www.silkn.eu. If the device is damaged, defective, in need of repair or you need our assistance, please contact your nearest Silk’n service center. This manual is also available as a PDF download from: www.silkn.eu.

Service number: 0906-2130009
Email: customercareuk@silkn.eu

Invention Works B.V.
Galileïstraat 17, 3029 AL Rotterdam
The Netherlands
www.silkn.eu • info@silkn.eu

2nd Floor, De Burgh House,
Market Road, Wickford,
Essex, SS12 0FD
United Kingdom