APPLEDENTAL R-Smart Mini Apple Dental Endo Motor

Endo Moto r
MODEL: R-Smart Mini
Product User Manual
For Dental Use Only

R-Smart Mini Apple Dental Endo Motor

Product Type: LED Cordless Endo Motor
Brand: DTS
Model: R-Smart Mini, K028
Producer Company: Guangzhou Reborn Endo Medical Instrument Co., Ltd.
Exporter Company: GUANGDONG JINME MEDICAL TECHNOLOGY CO. LTD.
Importer Company: METCO DENTAL A.Ş.
Adres: Alb. Faik Sözdener Cad. Çetintaş İş Merk.
No: 13/3 34710 Kadıköy İstanbul
Tel: 216 3457424 Fax: 216 3499368
e-mail: metco@metcodental.com
web: www.metcodental.com
Thank you for purchasing Endo Motor I .

General Introduction

Endo Motor I is an endodontic operation instrument Endo motor function is a kind of endodontic micromotor to drive Ni-It instruments. It can assist the dentists to shape more standard root-canal in the press of root-canal treatment  based on the micro-electron control technology. Endo motor I can held in hand to operate and cordless charging. This unit contributes to alleviate the dentist’s working intensity.
Please read this Operation Manual carefully before use for  operation instructions, care and maintenance. It is recommended to keep this Operation Manual for future reference.
Contra-indications

• In cases where a patient has been fitted with an implanted heart pacemaker (or other electrical equipment) and has been cautioned against use of small electrical appliances (such as electric shavers,hair dryers, etc, )it is  recommended not to use Endo Motoric .
• This instrument should not be used for severe curved root canal preparation. Do not use Endo Motor I for implant or any other dentist procedure outside endodontics

Warnings

• For your own safety, please wear personal protective equipment’s (gloves, glasses, mask).
• Do not use this unit when it’s’ charging.
• Do not disassemble or alter the motor handpiece.
• If you should notice battery fluid leak, deformation of the motor handpiece casing or partial discoloring, immediately stop use and contact your dealer.
• If you will not use the product for long period of time, remove the battery to avoid fluid leak.
• The system may present the possibility of malfunction when used in the presence of electromagnetic interference wave. Do not install system in the vicinity of the device which emits magnetic waves.
• Do not use in the presence of flammable products.
• This motor is equipped with an electronic circuit to limit file breakage. Nevertheless, files may still break due to higher torque conditions or to fatigue resistance.

Precautions

• The appliance must only be used with the manufacturer’s original accessories.
• Never use any other AC adapters.
• The RPM number indicates true instrument speed when the appropriate reduction rate is selected. Make sure the selected reduction matches the ratio of the contra angle handpiece.
• If the motor stops or runs too fast, discontinue use and call for assistance.
• After sterilization, make sure the motor has reached a temperature below 40°C before use.
• Do not introduce any oil into the micro motor.
• The system functions normally in the environment where the temperature is at 5-40°C (50-104°F), humidity at 10-85%RH, atmospheric pressure at 50-106kpa, and no moisture condensation in the Control Unit. Any use outside these limits may cause malfunction
• Do not use bent, damaged, deformed or non–ISO- injury due to its unexpected breaking or “flying off” conforming file. Using such a file may result in persona during rotation.
• Check the product before use by rotating it, paying attention to looseness. vibration, noise and temperature (heat generation). If any abnormal condition is found even slightly at that time, immediately stop use and contact your dealer.
• Always clean the shank of the file to be installed. Allowing dirt to enter the chuck could cause loss of concentricity and deterioration of chucking force.
• Before changing head or bur, turn off the power of the motor handpiece. Changing with the power kept on may cause unintended rotation by accidental touch of the ON/OFF button.
• Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen or nitrousoxide.

Notice

• Exercise sufficient care in using the product by giving patient safety first priority.
• Fully-charged rechargeable battery generally discharge gradually over time even the motor handpiece is not used It is recommended to recharge the battery just before use.
• When the motor handpiece stops automatically by detecting a low battery voltage, turning on the power again after a while may not detect the low voltage immediately. This is not a failure, but due to battery characteristics. Since the voltage drop does not coincide with the remaining battery capacity, consider it only as a yardstick.
• When discarding the contra angle head and motor handpiece. dispose of them as medical waste.
• Users are responsible for operational control, maintenance and inspection.
• Store the system in place where temperature is at-10. 50°C (14-122°F), humidity at 10-85%RH, atmospheric pressure at 50-106Kpa, and the system is not subject to air with dust, sulfur or salinity.

Features

• This unit can be used in independent endodontic shaping.
• 9 different programs can be preset according to requirement of operator.
• When rotary file reaches preset torque, the file will automatically withdraw until removal of resistance.
• This unit is powered by rechargeable Lithium battery, in order to expand life span of battery. The unit will be turned off automatically in 8 minutes without any uses.
• Contra angle, file clip and lip hook can be 135°C autoclaved

Main Specifications

< Main Unit>

500g
Packing size| 188x90x85mm