kibri 39100 H0 Corner House Diplomatenvilla Bonn Installation Guide

: June 13, 2024
: kibri

Table of Contents

Important information
Contents
Montage
Read User Manual Online (PDF format)
Download This Manual (PDF format)

kibri 39100 H0 Corner House Diplomatenvilla Bonn Installation Guide

Important information

Please observe the correct sequence when assembling the parts to sub assemblies and to the completed product!

Safety information

Caution:

Risk of injury!

Due to the finely detailed reproduction of the original and the intended use, this product may have sharp points or edges as well as parts that may easily break off. Some tools are required for assembly

Assembly
Carefully separate the parts required for the respective assembly phase with a side cutter or a sharp utility knife from the injection-moulded sprue and deflash the edges.

Since some sprues are used for several different products it is quite possibly that some parts may not be needed for this particular product.

The contents of this kit have been carefully checked against the parts list. However, should a part be missing please contact us by e-mail or by sending a letter. Please state the precise product description and the item No. as well as the No. of the sprue and the specific part that is missing. You will find all necessary information in this manual. We will promptly supply the missing parts.

You will find suitable glue for the kits in the kibri product range

Teile-Nr. Stuck| Teile-Nr. Stuck| Teile-Nr. Stuck| Teile-Nr. Stuck| Teile-Nr. Stuck
---|---|---|---|---
R980| 1| S106| 2| S124| 2| S142| 1| S169| 1
| | S107| 4| S125| 2| S143| 1| S170| 2
R981| 1| S108| 6| S126| 1| S144| 1| S171| 2
| | S109| 5| S127| 1| S145| 2| S172| 2
R982| 1| S110| 6| S128| 1| S146| 2| S173| 2
R983| 1| S111| 3| S129| 1| S147| 1| S174| 2
R984| 2| S112| 2| S130| 2| S148| 2| |
R985| 2| S113| 2| S131| 2| S149| 2| S175| 2
R986| 2| S114| 2| S132| 2| S150| 2| S176| 2
R987| 1| | | S133| 2| S151| 1| S177| 5
R988| 1| S115| 2| S134| 1| S152| 2| S178| 1
R989| 1| S116| 10| S135| 1| S153| 1| S179| 1
R990| 1| S117| 12| S136| 1| S154| 1| S180| 1
R991| 1| S118| 5| S137| 1| S155| 1| S181| 1
| | S119| 2| S138| 1| S156| 1| S182| 1
R992| 1| S120| 2| S139| 1| S157| 1| S183| 1
R993| 1| S121| 2| | | S158| 1| S184| 2
| | S122| 1| | | S159| 2| S185| 2
R994| 1| S123| 2| | | S160| 1| S186| 1
R995| 1| | | | | S161| 2| S187| 1
R996| 1| | | | | S162| 2| |
R997| 2| | | | | S163| 2| |
R998| 2| | | | | S164| 1| |
R999| 1| | | | | S165| 1| |
S100| 1| | | | | S166| 1| |
S101| 1| | | | | S167| 3| |
S102| 1| | | | | S168| 3| |
S103| 2| | | | | S188| 1| |
S104| 2| | | | | S189| 1| |
S105| 2| | | | | S978| 1| |
| | | | | | S979| 1| |

The high-resolution master copy for all kind of signs in your kibri kit are available as download for free. Deco sheets can be printed by using a standard colour printer. Suitable paper or foil for the respective printers are offered by specialized trade. Best way is to use self-adhesive smooth papers or foil with low material thickness.
Print – cut-stick-ready!

dekoboegen.kibri.de

Catalogues by Viessmann and kibri/Vollmer can be ordered alternatively via internet. Please follow the link or use QR-code.

www.katalogversand.kibri.de

Montage

Mounting

Tip: To illuminate the model from inside, please use Viessmann item 6832 House illumination socket with bulb E5,5, clear. For detailed illumination of each window and room, please use Viessmann item 6005 House illumination starter set. See product information on the last page. S125 7
Mounting Instruction
Tip:
Use the enclosed black paper to shade the model from inside.

Base can be used with or without fences. Pierce the base before installing
Installation
Illumination tip with approved Viessmann items

The light boxes/light rails for indirect window illumination allow a completely new individual lighting of rooms/floors.

House illumination starter set: 6005

Starter set floor interior lighting: 6045

Board with one LED for house illumination: 6006 warmweiß, 10 Stück warm- white, 10 pieces

6006 , 10 warm-white, 10 pieces
6007 , 10 yellow, 10 pieces
6008 , 10 white, 10 pieces
LED Board
LED with connection cable:

6046 , 10 warm-white, 10 pieces
6047 , 10 yellow, 10 pieces
6048 , 10 white, 10 pieces

Board two for LEDs with House illumination

6017 , 10 yellow, 10 pieces
6018 , 10 white, 10 pieces
6021 , 10 -white, 10 pieces

Fantastic depth effect for your windows

House illumination starter set, item 6005

Cut out curtain background motive.
Fix on the light box.
Draw the internal measurements on a cardboard minimum 1 mm depth required. Cut the window ground plot with cutter
Same way outer frame of light box.
Fix the part on the curtain background.
Glue the light boxes onto the windows which are now equipped with glasses
Here you see a window with and without embrasure.
Picture shows the better method using embrasure (left window)

Starter Set floor interior lights, item 6045

Cut out the background motive and fix into the light rail. Please take care for direction!
Glue the dividing walls to cover the light between windows and doors as well as for final end
Filling parts to cover space between the LEDs, length can be cut accordingly
The filling pieces and the LED plastic version are fixed exactly above windows and doors
Glue the light rail behind the window line.
Nice result with depth effect

Around the corner

Light rails in 4 different heights for different window and door heights and scales. Can be cut as required,with notches
Dividing walls movable to cover the light between the windows, doors and finish.
Filling parts to cover space between the LEDs to be cut as required, with notches.
LED with plastic frame movable to exact position over the windows and doors. Suitable for light boxes from house illumination item 6005.

More accessories

Power module

5215
The ideal solution for stable and powerful switching current as well as bright an flicker- free LED-lighting.

Plug-in rail for interior lighting on board, 12-pole

6049
The brilliant and useful 12-pole plug-in rail for interior lighting on board connects up to 12 power consumers – simply by jacks for plugging in the resistors. No extra plug, screw terminals or soldering required.