kibri 39257 Extension Set Instruction Manual
- June 12, 2024
- kibri
Table of Contents
kibri 39257 Extension Set
Product Information
- Product Name: H0 Extension set for Maintenance hangar Deutsche Bahn item 39256
- Manufacturer: kibri
- Country of Origin: Europe
- Level of Difficulty: Learners to Professionals
Product Usage Instructions
- Important information: Please observe the correct sequence when assembling the parts to sub-assemblies and to the completed product. Some tools are required for assembly.
- Contents: Check the contents of the package for completeness after unpacking. The kit includes 6 rail profiles and a manual.
- Mounting:
- Kleben: Use suitable glue for the kits in the kibri product range.
- Durchschieben der Schienenprofile: Push the rail profiles through the designated slots.
- Alternativer Aufbau: For alternative mounting, refer to the manual.
Please note that due to the finely detailed reproduction of the original and the intended use, this product may have sharp points or edges as well as parts that may easily break off. Carefully separate the parts required for the respective assembly phase with a side cutter or a sharp utility knife from the injection-moulded sprue and deflash the edges. Also, since some sprues are used for several different products it is quite possible that some parts may not be needed for this particular product. If a part is missing, please contact the manufacturer by e-mail or by sending a letter with the precise product description and item number as well as the number of the sprue and the specific part that is missing.
You will find the latest version of the manual on the kibri website using the item number. Catalogues by Viessmann and kibri/Vollmer can be ordered alternatively via internet.
You will find the latest version of the manual on the kibri website using the item-No. Subject to change without prior notice. No liability for mistakes and printing errors.
Important information
Please observe the correct sequence when assembling the
parts to sub-assemblies and to the completed product!
Safety information
Caution:
Risk of injury!
Due to the finely detailed reproduction of the original and the intended use,
this product may have sharp points or edges as well as parts that may easily
break off. Some tools are required for assembly.
Assembly
Carefully separate the parts required for the respective assembly phase with a
side cutter or a sharp utility knife from the injection-moulded sprue and
deflash the edges.
Since some sprues are used for several different products it is quite possibly
that some parts may not be needed for this particular product.
The contents of this kit have been carefully checked against the parts list.
However, should a part be missing please contact us by e-mail or by sending a
letter. Please state the precise product description and the item-No. as well
as the No. of the sprue and the specific part that is missing. You will find
all necessary information in this manual. We will promptly supply the missing
parts.
You will find suitable glue for the kits in the kibri product range.
Contents
Check the contents of the package for completeness after unpacking:
- 6x rail profiles
- Manual
The high-resolution master copy for all kind of signs in your kibri kit are
available as download for free. Deco sheets can be printed by using a standard
colour printer. Suitable paper or foil for the respective printers are offered
by specialized trade. Best way is to use self-adhesive smooth papers or foil
with low material thickness.
Print – cut – stick – ready!
Catalogues by Viessmann and kibri/Vollmer can be ordered alternatively via internet.
Mounting
Alternative mounting 
Final Product
