kibri 39253 H0 Extension Set Instruction Manual
- June 12, 2024
- kibri
Table of Contents
kibri 39253 H0 Extension Set
Product Information
The H0 Extension set for Maintenance hangar GleisBau item 39252 is a product made in Europe by kibri. It is a model kit that requires assembly and is suitable for Einsteiger Learners, Fortgeschrittene Advanced learners, and Profis Professionals. The kit includes 6x Rails fiber and an instruction manual. The manual contains important information on safety, assembly instructions, and the contents of the kit.
Product Usage Instructions
Before starting assembly, please read the important safety information in the manual. Please observe the correct sequence when assembling the parts to sub- assemblies and to the completed product. Some tools are required for assembly. Carefully separate the parts required for the respective assembly phase with a side cutter or a sharp utility knife from the injection-molded sprue and deflash the edges. Since some sprues are used for several different products it is possible that some parts may not be needed for this particular product.
Check the contents of the package for completeness after unpacking. If a part is missing, please contact kibri by email or letter with the precise product description and the item-No., as well as the No. of the sprue and the specific missing part.
To assemble, follow the instructions provided in the manual. The kit includes 6x Rails fiber and various other parts such as 5481/2, 4x 5481/5, 4x 5481/1, 2x 5480/6, and others. The manual provides a diagram of how to assemble these parts using glue. Please push through the rail profiles as instructed in the manual.
You will find suitable glue for the kits in the kibri product range. Catalogues by Viessmann and kibri/Vollmer can also be ordered alternatively via Internet.
Important information
Please observe the correct sequence when assembling the parts to sub- assemblies and to the completed product!
Safety information
Caution:
Risk of injury!
Due to the finely detailed reproduction of the original and the intended use,
this product may have sharp points or edges as well as parts that may easily
break off. Some tools are required for assembly.
Assembly
Carefully separate the parts required for the respective assembly phase with a
side cutter or a sharp utility knife from the injection-moulded sprue and
deflash the edges. Since some sprues are used for several different products
it is quite possibly that some parts may not be needed for this particular
product. The contents of this kit have been carefully checked against the
parts list. However, should a part be missing please contact us by e-mail or
by sending a letter. Please state the precise product description and the
item-No. as well as the No. of the sprue and the specific part that is
missing. You will find all necessary information in this manual. We will
promptly supply the missing parts. You will find suitable glue for the kits in
the kibri product range.
Contents
Check the contents of the package for completeness after unpacking:
- 6x Rails fiber
- Manual
The high-resolution master copy for all kind of signs in your kibri kit are
available as download for free. Deco sheets can be printed by using a standard
colour printer. Suitable paper or foil for the respective printers are offered
by specialized trade. Best way is to use self-adhesive smooth papers or foil
with low material thickness.
Print – cut – stick – ready!
Catalogues by Viessmann and kibri/Vollmer can be ordered alternatively via internet. Please follow the link or use QR code.
Montage
Mounting
DIMENSIONS
INSTALLATION
Viessmann Modelltechnik GmbH Bahnhofstraße 2a D – 35116 Hatzfeld-Reddighausen
[email protected]
+49 6452 9340-0
www.viessmann-modell.de