Holmes 32510112 Blizzard 6 Inch Air Circulator Instruction Manual

June 13, 2024
Holmes

Holmes 32510112 Blizzard 6 Inch Air Circulator Instruction Manual
Holmes 32510112 Blizzard 6 Inch Air Circulator

MAINTENANCE

USER SERVICING INSTRUCTIONS
Follow these instructions to safely and correctly care for this fan.

REPLACEABLE FUSE
If the (2.5 Amp, 125 Volt) replaceable fuse blows, please visit our website at www.getholmesfans.com for information on how to order a new fuse. Follow the below instructions to replace the fuse on the plug.

REPLACING THE FUSE

  1. Unplug the fan.
    Grasp plug and remove from the receptacle or other outlet device.
    NOTE: Do not unplug by pulling on cord.

  2. Open fuse cover, located on the top of the plug, by using your thumb or a flathead screwdriver to slide the cover towards the prongs.
    NOTE: Ensure the fuse cover is completely open before attempting to remove fuse.

  3. Remove fuse carefully by using a small screwdriver to pry it from the compartment at the metal ends of the fuse. (See Figure 2)
    Instructions

  4. Place plug on a solid, flat surface. Insert new 2.5 Amp, 125 Volt fuse into fuse compartment. Use a small screwdriver to secure the metal ends of the fuse into the compartment.
    CAUTION: Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.

  5. Slide fuse cover closed completely.

NOTE: If fuse cover is difficult to close, make sure the fuse is completely secured in place by pressing on metal ends of the fuse.

CAUTION: Risk of fire. Do not replace the attachment plug. It contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken including the following:

  1. Read all instructions before using this appliance.
  2. Use fan only for purposes described in the instruction manual.
  3. To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.
  4. Close supervision is necessary when any appliance is used near children.
  5. Not intended for use by children
  6. Unplug from outlet when not in use, when moving fan from one location to another, and before cleaning.
  7. Avoid contact with moving parts.
  8. Do not operate in the presence of explosive and/or flammable fumes.
  9. To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.
  10. Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner. Discard fan or contact customer service.
  11. Do not run cord under carpeting. Do not cover cord with throw rugs, runner, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
  12. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
  13. Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas. 14. Do not use outdoors.
  14. To disconnect, grip plug and pull from wall outlet. Never yank on cord.
  15. Always use on a dry, level surface.
  16. Do not operate fan until fully assembled with all parts properly in place.
  17. This product is intended for household use ONLY and not for commercial or industrial applications.
  18. WARNING: To reduce the risk of electrical shock and injury to persons, do not use in window.
  19. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
  20. WARNING: To reduce the risk of fire, electric shock or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (eg: Parts made at home using a 3D Printer).
  21. his product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Replace the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a short circuit may be present and the product should be discarded or contact customer service.

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.

**DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

**

OPERATION

ASSEMBLY
This Table Fan comes completely assembled and is ready for use.

TILT ADJUSTMENT
Gently move the fan head up or down manually to the desired angle.

OPERATING INSTRUCTIONS

  1. Make sure the fan is in the OFF position.
  2. Set the fan base on a dry, level surface.
  3. A green backlit power icon will illuminate as soon as the fan is plugged in. Push the power icon (I) to turn the fan on.
  4. Use the up and down speed buttons (H and J) to cycle through the 3 speed settings (low, medium or high). The number of speed indicator lights on the display panel will indicate the correct speed setting.

A. Front Grill
B. Rear Grill
C. Fan Blade
D. Base
E. Control Panel
F. Cord
G. Speed Indicator
H. Speed Up Button
I. Power Icon
J. Speed Down Button

Product Overawe

CLEANING / MAINTENANCE

FAN CLEANING

  • Always unplug the fan before cleaning.
  • Do not allow water to drip on or into the fan housing.
  • Use only a soft cloth moistened with a mild so solution.
  • Do not use harsh chemicals such as gasoline, thinner or benzene as a cleaner.
  • Do not attempt to remove the fan blade.

FAN HEAD AND BASE CLEANING
Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan base and head. Use

CAUTION around the housing area.
Do not allow the motor or other electrical components to be exposed to water.

FAN STORAGE

  • Store the fan in a clean, dry location between seasons or when not in use for an extended period of time.
  • Keep the fan protected from dirt and dust during storage.

WARRANTY INFORMATION

3 YEAR LIMITED WARRANTY

This device has a limited warranty of 3 years from the original date of purchase against workmanship and defects in material. If under normal use, your product fails to operate, please contact our customer service department at info@getholmesfans.com. A refund or replacement will be provided to you with proof of purchase. Star Elite Inc. may deny claims of damage caused by misuse or modifications of this product.

Warranty Service

Contact our customer service at www.getholmesfans.com/en/contact- us or info@getholmesfans.com or 1-866-769-3166 (8:30 am – 5:00 pm EST) Monday-Friday. Our team will be happy to assist.

www.getholmesfans.com

© 2023 Sunbeam Products, Inc. All rights reserved.
HOLMES® and BLIZZARD® are registered trademarks of Sunbeam Products, Inc. used under license. Distributed by Star Elite Inc., Montreal, Canada H3B 3X9 SEH022-030123

Holmes Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals