Godox LDX100 Bi Color LED Light Panel Instruction Manual

LDX100 Bi
Bi-color Panel Light

Instruction Manual

Safety Instructions and Attentions

First of all, as the most basic principle: This product is a professional lighting set equipment and should be used by professional lighting engineers or under the guidance of professionals. Basic safety attentions must always be followed during use, as follows:

1. Before use, please read and understand these instructions and ttentions.

2. Professional lighting is prohibited for chidren. When children are near, parents or accompanying persons must supervise closely to prevent children from personal injury due to collision with lamps or private use of lamps.

3. This lighting product is not ordinary lighting product and cannot be used for general lighting. Anyone who has suffered eye damage or has sensitive eyes should avoid using this product

4. When the lamp is on, it must be used with care. Do not touch high-temperature parts, such as LED lamp beads, to avoid burns.

5. When the lamp is on, it s forbidden to look directly at the lamp beads under any circumstances. Strong light should be used under the guidance of professional lighting engineers. Avoid prolonged exposure to strong light under any circumstances.
   If e discomfort,please tur off the lamp i time, suspend use, and see a doctor immediately.

6. If the lamp bead is damaged or deformed by heat,stop using this eauipment, and contact the manufacturer, service agent o qualified maintenance personnel to replace the lamp bead in time 1o avoid accidents.

7. This product s only suitable for use in -20°C to +40°C aperating environment and normal humidity environment.

8. Do ot use damaged equipment or accessories, and wait for professional maintenance personnel 1o check and repair 1o confrm being normal before use.

9. During using, if the casing of this product is broken due to being dropped, squeezed or subjected to strong impact, please do ot use i, 50 as to avoid electric shock njury dueto contact with internal electronic components,

10. If an extension cord is required, please use an extension cord with a current rating greater than or equ to that of the equipment.If an extension cord i rated less than the equipment, overheating may resut.

11. Some products have long power cords, please place the power cords properly and Keep them i safe place. Avoid contacting the power cord with overheating surfaces, avoid improper placement that could cause pulling damage, or trip on-site personnel Please use the certfied power cord from the original manufacturer.f the product is damaged by using a non-certified power cord,it will it be repaired by our factory

12. Be sure to unplug equipment from the power outlet before cleaning and repairing When notin use, do not pullthe power cord to unplug the equipment. For normal power-off,please hold both ends of the plug of the equipment with your hands and pull the  plug out of power outlet This equipment needs to be connected 10.a grounded outlet

13. This equipment s not waterproof, please keep it cry and do not immerse it in water or other liquids. The equipment should be installed in dry and ventilated place, and avoid using it inrainy, humid, dusty or overheated environments. Do not place any objects on the lamp or et iquid flow into the lamp to avoid accidents.

14. Do not disassemble the product without permission. Ifthe product fals it must be checked and repaired by authorized maintenance personnel

15. Before storing, make sure that the equipment has cooled down completely. For storage, unplug the power cord from the equipment. The equipment should be placed in the carrying case or in a ventilated dry place.

16. Do ot place equipment near flammable and volatile solvents such as alcohol and gasoline.

17. Do ot use accessories that are not recomimended by our factory to avoid fire, electric shock or personalinjury.

18. When cleaning, do not wipe it with a damp cloth, please use a dry cloth or a soft cloth 1o wipe the dirt of the equipment

19. Please take off the protective cover before using.

20. This product complies with ROHS, CE and FCC certification, please refer to the relevant national standards for use and operation

21. The safety instructions are formulated according to the sticttesting of the factory, and the design and specifications of the equipment are subject to change without prior notice. For latest product information, please check the GODOX website and view  latest electronic instruction.

22. Some products have buif-i ithium batteries. Please use specified chargers, and use them within proper range of the specified voltage and temperature according to the correct operating instructions.

23. Some products are battery powered. Do not use any bateries, power sources or accessories not specified in the instructions for such products. Keep batteries and other accessories out of the reach of children and infants. I the instance that a child orinfant  swallows a battery or accessory, immediate emergency medical attention is required.
    If the battery leaks, becomes discolored, deformed, emits smoke, or emits an abnormal odor, remove it mmediately. Be careful during removal to avoid burns.
    Continued use could result n fre, electric shock, or burns. Do not use any deformed or modified batteries. Do not disassemble or moify this product or battery. Do not heat or solder the battery. Keep the battery away from fire or water. Do not incorrectly insert the positive and negative ends of batteries, o mix old and new batteries or batteries of different types together 24 One- year warranty period, accessories such as consumable batteries, adapters, power cords, etc are not covered by ths warranty.

24. If itis found that the equipment is repaired without authorization, the one-year warranty period will be cancelled and relevant fees wil be charged for maintenance.

25. Machine failures caused by non-standard operation are not covered by the warranty.

keep these instructions!

Foreword

Thank you for purchasing!
Bi-color Panel Light LDX100Bi features: adjustable color temperature, 11 FX modes, Bluetooth AP/ 2.4G wireless/light body control, making it quite suitable for advertisement shooting, wedding portraits, interviews, film and television production, micro-film  shooting etc

Main Features

• Wide CCT range freely adjustable from 2800K to 6500K
• Twoways of power supply: DC power supply or V-mount battery power supply.
• Three ways of controlling: Bluetooth APR, 2.4G remote control and light body.
• Detachable diffuser provides more lihting possibiltes.
• 11 FX modes: flash, lightning, cloudy, broken bulb, TV, candie, fir, firework, explosion, welding and SOS,
• 10 preset effects can be saved gives convenience.
• 360° rotatable bracket offers flexibily

Warning
Always keep this product dry. Do not use in rain or in damp conditions
Do ot disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
Keep out of reach of children
Do ot use the flash unit in the presence of flammable gas. In certain circumstance, please pay attention to the relevant warnings.
Do ot eave or store the product if the ambient temperature reads over 40°C.
Do ot use the product in the presence of flammable gas. In certain circumstance, please pay attention to the relevant warnings.

Name of Parts

Light Body

1. Detachable Diffuser
2 Disassembly Pusher
3 Bracket Adjustment Dial
4.v-mount Battery Slot
5. Battery Detachment Button
6. Display| 7. CCT/FN Dial
8.0C Input Port
9. MODE Button
10. Wireless Bution
11. Lock Button
12, PRESET Button| 13. DIM Dial
14. Power Switch Button
15.Sleeve
16 Sleeve Fixing Knob
17, Bracket
18 Instalation Siide
---|---|---

What’s Inside

Separately Sold Accessories
Remote Control RC-A6II Soft Box

Power Supply

Installation of the Diffuser
Push the disassembly pusher in the opposite direction of the light beads, insert in the diffuser along the sides, and then push the disassembly pusher in the diection of the light beads.

Installation of the Barndoor
Push the disassembly pusher in the opposite direction of the light beads, insert in the closed bardoor along the siides, and then push the disassembly pusher n the direction of the light beads.

Installation of the Diffuser and the Barndoor
Installthe diffuser onto the barndoor first, then push the disassembly pusher in the opposite direction of the light beads,insert in the barndoor with diffuser along the sides, and then push the disassembly pusher in the direction of the light beads.

Power Switch

1. Toggle the power switch button to < > after inserted one v-mount battery to turn on the device.
2. Toggle the power switch button to < > after connected to AC power supply with the adapter to turn on the device.
3. Toggle the power switch button to < > in either power supplies can turn off the device.

Brightness Adjustment

When the light is in CCT/FX mode, turn the DIM dial can adjust the brightness from 0% to 100%. Turn left to decrease the brightness by 1 unit while turn right to increase the brightness by 1 unit, with quick adjustment available by turning quickly.

Mode Selection

Short press the MODE button to switch between CCT mode and FX mode.

1. CCT Mode Turn the CCT/FN dial left once can decrease the CCT value by 100K, while turn right once can increase the CCT value by 100K, with quick adjustment available and adjustable range from 2800K to 6500K. Short press the CCT/FN dial can switch among 2800K/3200K/4300K/5600K/6500K.

2. FX Mode Turn the CCT/FN dial in FX setting interface to select effect type (11). Short press the CCT/FN dial can adjust the effect level.

FX Table

Wireless Setting

Short press the wireless button to enter 2.4G wireless setting, short press the CCT/FN dial to select GR/CH/ID/Bluetooth.

GR: Short press the CCT/FN dial and the group frame icon blinks, then turn the CCT/FN dial to select among 16 groups (A-F/0-9).

CH: Short press the CCT/FN dial and the CH icon blinks, then turn the CCT/FN dial to select among 32 channels (1-32).

ID: Short press the CCT/FN dial and the ID icon blinks, then turn the CCT/FN dial to select among OFF/99 IDs (1-99).

Bluetooth reset : Long press the CCT/FN dial until Bluetooth icon blinks means Bluetooth is resetting, it will stop blinking after successfully reset.

Wechat Official Account GODOX Photo Equipment Co., Ltd.
Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’ an District,
Shenzhen 518103, China
Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.comwww.godox.com
Made in China
705-LOX10B-00

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>