SIMTRUM BLS-1000-2 High-Speed Universal Analog Driver-Controller Instruction Manual
- June 13, 2024
- SIMTRUM
Table of Contents
BioLED Drivers with Manual and Trigger Mode Input Controls
Part Numbers: BLS-1000-2, BLS-3000-2, BLS-13000-1, BLS-18000-1
FEATURES
- Dual Control Modes: manual or trigger-input
- High Frequency response
- Capable of driving variable loads
- BNC connectors
APPLICATIONS
- Microscopy
- Lighting
- Machine Vision
- Display
- Semiconductor equipment
- Testing instruments
- Medical instruments
|
---|---
BLS-1000-2/BLS-3000-2 (Front Panel)| BLS-1000-2/BLS-3000-2 (Rear Panel)
|
BLS-13000-1/BLS-18000-1 (Front Panel)| BLS-13000-1/BLS-18000-1 (Rear Panel)
PRODUCT DESCRIPTION
Mightex BLS-1000-2, BLS-3000-2, BLS-13000-1, and BLS-18000-1 LED Controllers
have two operation modes to control an LED:
Manual Mode: User can control the output current by a turn-counting knob
manually.
Trigger Mode: Analog input signal to fully control the output current.
The control mode is selected with a slide switch on the front panel, the
factory default is “Manual” mode. BLS-1000-2 and BLS-3000-2 provide Maximum
Current Selection DIP switches on rear panel which allow the user to set
maximum output current of the channel to 500 / 750 / 1,000mA for BLS-1000-2,
and 1,000 / 2,000 / 3,000mA for BLS-3000-2. The factory default is set to
500mA for BLS-1000-2 and 1,000mA for BLS-3000-2. BLS-13000-1 and BLS18000-1
has only one maximum current setting of 13,000mA and 18,000mA, respectively.
When the controller is set to “Trigger” mode, the output current is fully
controlled by the input analog signal (0-5V).
ELECTRICAL SPECIFICATIONS
| Parameters | Value | Unit |
|---|---|---|
| BLS-1000-2 | BLS-3000-2 | BLS-13000-1 |
| DC Input Voltage | 9 ∼ 12* | 9 |
| DC Input Current | > total/combined channel currents** | < 2.5 |
| Channel Driving Voltage (Max) | Vdc – 4.5 | Vdc – 4 |
| Current Accuracy | ±3% | mA |
| Channel Driving Current | 0 ∼ 1,000 | 0 ∼ 3,000 |
| Channel Output Power Limit | < 20 | < 15 |
| Channel Frequency Response | < 100 | < 50 |
| External Analog Input | 0 ∼ 5*** | V |
*. When Vforward of LED load is more than 8V, 24V DC input might be used.
**.The Input current should be more than the sum of output currents of two
channels.
FRONT PANEL AND REAR PANEL(BLS-1000-2/BLS-3000-2):
The Front Panel has power switch and power indicator. For each channel, it has
a slide switch (for selecting Manual or Trigger mode) and a turn-counting dial
(for adjusting output current). The Rear Panel has a DC input plug (9 ~ 24V
DC). For each channel, it has a BNC connector for external trigger/ analog
voltage signal (0-5V), a two-pin LED aero connector, and a pair of DIP
switches to set the maximum current of the channel.
FRONT PANEL AND REAR PANEL (BLS-13000-1/BLS-18000-1): Front Panel has
power switch and power indicator. It also has a slide switch (for selecting
Manual or Trigger mode) and a turn-counting dial (for adjusting output
current). The Rear panel has a DC (12V or 48V) input plug, and it also has a
BNC connector for analog input (0-5V), a two pin LED Fan aero connector to
drive the fan of the LED light source, and a pair of LED+/LED- to drive the
LED light source.
MECHANICAL SPECIFICATION
| BLS-1000-2 / BLS-3000-2| BLS-13000-1 / BLS-18000-1
---|---|---
Dimension| 160mm (L) x 157mm (W) x 68mm (H)| 221mm(L) x 156mm (W) x 96mm ( H )
Weight| 600g| 1300g
INSTALATION DRAWING
Singapore Main Office
Telephone: +65 6996 0391
Email: info@simtrum.com
China Main Office
Telephone: +86 15000853620
Email: sales@simtrum.cn
www.simtrum.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>