windgoo B3 Seated Electric Scooter User Manual
- June 13, 2024
- Windgoo
Table of Contents
windgoo B3 Seated Electric Scooter
Product Information
This product is an electric bike with various features and accessories. It has a gear shift, dashboard, handlebar, brake handle, power button, standpipe, vertical folding clasp, safety buckle, front light, head tube, front fork, tire, wheel hub, front fender, frame, battery box, pedal, seat, seat tube, backlight, back fender, disc brake, brake disc, and kickstand.
The product comes with several accessories including 2x batteries, 1x charger, 1x adapter, and 1x folding mechanism.
The battery should only be handled by professionals. Charging should be done with caution and any issues such as strange smells or overheating should be addressed immediately. The adapter should not be used if it is damaged or if anything has fallen into it. Disassembling or replacing the components is not recommended.
The product has specific specifications such as size, performance standards, material, folding size, unfolding size, pedal height, wheel size, body colour, package weight, weight, maximum load, speed range, climbing angle, temperature resistance level, waterproof rating, battery capacity, rated power, charger voltage, charger time, and brake mode.
It is important to maintain and clean the electric bike regularly. Before riding, the brakes should be checked and the rear wheel should be braked first. The tightness of the brakes should be adjusted if necessary. Safety precautions should be taken during rainy and snowy days. Wearing a helmet and following traffic regulations is advised. Riding in crowded areas should be avoided. Downhill or slippery roads should be approached with caution and speed should be kept under 15km/h. Overloading the bike beyond 120kg is not recommended.
Product Usage Instructions
- Before riding, check the brakes and adjust the tightness if necessary using a hexagon bar wrench.
- Keep a longer braking distance during rainy and snowy days for safety reasons.
- Wear a helmet and comply with traffic regulations while riding.
- Avoid riding on crowded roads.
- When going downhill or on slippery roads, keep the speed under 15km/h.
- Do not overload the bike beyond 120kg.
- Regularly clean and maintain the electric bike.
Guidance
Before using this electric bike, familiarize yourself with how to operate, it
so that you can keep the bike in the best condition possible. This User Manual
can help you learn how to drive this electric device securely. This User
Manual includes all the instructions and notes; please read it carefully and
follow these instructions. If you fail to follow the instructions or violate
the warnings, our company won’t be held responsible for any ensuing
consequence. Don’t use the electric bike before reading the instructions and
knowing the product’s performance. Don`t lend it to someone else who is
unfamiliar with the product.
Function Diagram
- Gear shift
- Dash board
- Handle bar
- Brake handle
- Power button
- Standpipe
- Vertical folding clasp
- Safety buckle
- Front light
- Head tube
- The front fork
- Tire
- Wheel hub
- Front fender
- Frame
- Battery box
- Pedal
- Seat
- Seat tube
- Back light
- Back fender
- Disc brake
- Brake disc
- Kickstand
Battery usage
Like all rechargeable batteries, lithium batteries are recyclable and
should be recycled or disposed of according to State and local guidelines.
They should never be disposed of in normal household waste, and never be
incinerated, as they might explode. Contact your local authorities for
disposal or recycling practices in your area.
NEVER CHARGE THE BATTERY OVERNIGHT AND NEVER LEAVE IT UNATTENDED FOR A LONG PERIOD WHILE IN CHARGE.
This product meets and complies with all Federal regulations. Please keep the charging temperature between 5 ℃ -45 ℃, and the ride temperature between -20℃ to 60℃, and always keep the battery dry. Prohibit to put the battery into acid or alkalinity liquid. Keep away from rain fire and heat. Non-professionals are not allowed to intervene in the battery.
Warning: Non-professionals are not allowed to intervene on the battery.
Charging cautions
- Don’t charge it over 6 hours and don’t charge beyond 2A electric current. Please charge it every two months.
- When not using it for a long time, please keep the battery in a dry and cool place. Follow the instructions or the user manual will be responsible for the consequence.
- When charging, please keep the vehicle in a ventilation environment, and don’t be exposed to the sun directly or enclosed space.
- When charging, please connect the battery first, then plug it into the power. When the indicator shows the battery is full, please unplug it immediately.
- When the indicator turns green, turn off the power, and don’t connect the battery when not charging.
Adaptor
When charging, if the indicating light goes wrong or some strange smell
comes up or the adaptor is overheated, please stop charging immediately, then
check and repair or replace the adaptor.
If something drops into the adaptor, especially water or other liquid, please don’t use the adaptor to protect the main circuit from a short circuit. Don’t connect the adaptor to the power if it doesn’t charge. Do not disassemble or replace the component
Product Accessories
FOLDING
Function Introduction
- Charging: connect the charger to charge, with the AC plug first and the DC plug next. When the power bar on the bike handle shows full and the charger indicator turns green from red, it indicates full power.
- Press the power button: Push forward the power button to turn on the bike. The dashboard lights up after booting; Push back the power button to turn off the bike. The dashboard light will be off after turning off the power.
- After booting, the dashboard lights up and indicates the amount of electricity.
- Horn : Pressing the horn button, the horn sounds up. Recommend clicking it slightly. When pressing for over 10 seconds, the horn stops, you need to repress it.
- Front light ： front light.
- Brake and rear light: Backlight lights up when braking. It could not accelerate before the brake is fully loosened.
- Zero-speed booting: you can accelerate by rotating the handle gently.
- Speeding : Please speed up slowly, don’t force the rotating bar hard or it will break.
- Cruise: Press the uniform cruise button when riding, and then the bike runs at the same speed. Press the button again and brake or release the rotating bar and speed up again then the uniform cruise mode is canceled.
Specification
Size
| Parameters| Standard Data
---|---|---
Material| Iron
Folding Size| 1050200640mm
Unfolding Size| 1050475990mm
Pedal Height| 250mm
Wheel Size| 12 inches
Body Color| Black
Package Weight| 24KG
Performance
| Weight| 19.6KG
Max Load| 120KG
Speed| 25 km/h
Range| 35-37KM
Climbing Angle| 10-12°
Temperature| 20~25℃
Waterproof| IPX4
Standards
| Battery| 7.5Ah
APP| √
Rated Power| 250W
Charger voltage| 42V
Charger time| 3 hours
Brake Mode| Front and rear disc brakes
Cleaning the electric bike
- Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents as they may damage the surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners as they may damage or dissolve the components.
- When you are cleaning the bike, make sure the bike is switched off, is not connected to the charging cable, and the charging port is covered with a rubber cap, to avoid serious damage caused to the bike by water getting inside.
- Keep the bike in a dry and cool place and avoid long-term outdoor storage when the bike is not used. Long-time exposure to the outdoor sun, excessive heat, and excessive cold will speed up the ageing of the bike’s outer case and reduce the lifespan of the battery.
Riding Guidance
Please check the brake before riding and brake the rear wheel first. Be careful of the tightness of the brake. Use the hexagon bar wrench to adjust if it’s loose. Keep a longer braking distance for safety reasons on rainy and snowy days. Please wear a helmet comply with the traffic regulations and don’t ride it in the driveway. Don’t ride it on a crowded road. When going downhill or on a slippery road, the speed should be under 15km/h. Do not overload beyond 120 kg.
Maintenance
The front and back wheels should be at the center of the frame. Put the electric bike in a cool and dry place after riding and check the motor and brake often, tighten the screw if needed suggested torsion(unit,kgf. cm): Bar screws 60-80 kgf. cm, bar stand screws 175-200 kgf. cm, seat screws 175-250 kgf. cw, wheel screws 320-4SOkgf.cw
Check if the wheel has scratches and damages or excessive wear frequently, if the inner wheel and the gas nozzle need to be vertical to the hub, the outer wheel should be replaced immediately with damage or scratches. Please contact the professional technician to replace it. When the outer tire is pierced and leaks air, please contact a professional technician for repair or replacement.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>