TESmart HCK0401A1U HDMI KVM Switch User Manual

TESmart HCK0401A1U HDMI KVM Switch User Manual

Features

• Using only 1 set of keyboard, mouse and monitor to control 4 computer devices
• Available to use keyboard and mouse without any delay after switching input sources
• Support resolution up to 3840*2160@60Hz 4:4:4
• HDCP 2.2 compliant
• With USB 2.0 hub port, it is possible to connect bar code scanner, USB hard drive or other USB devices to KVM
• With EDID emulators in each input port, keep Pcs always having correct display information.
• Support front panel button, IR signals, keyboard hot keys and mouse gesture to control KVM to switch inputs
• Support hot plug, connect or disconnect devices to the KVM at any time without turning off devices
• Support analog L/R audio output
• Support HDR10 and Dolby Vision
• Support keyboard and mouse pass through mode to improve mouse and keyboard compatibility

Packing List

• 1 * 4×1 HDMI KVM Switch
• 1 * DC 5V power adapter
• 1 * IR remote control
• 1 * User’s Manual

Panel Description

button to change the sensitivity of the mouse fast switching mode
__ 2| Keyboard and mouse pass through mode status| __ LED will be lit if keyboard and mouse pass through mode is activated
3| IR receiver| Receive IR remote signal
4| Input selection button| Select input sources
5| Input selection status| Indicate current selected input source
6| USB connection status| LED will be lit if the USB type B port connected to computers and computers are on
7| Power switch| Turn on or off power supply
8| DC 5V input| DC 5V power supply
9| HDMI output| Connect to HDMI display
10| Standard USB2.0 port| Connect to USB 2.0 devices, printer, barcode scanner, USB drives, etc
11| Keyboard and mouse input| For USB keyboard and mouse input, including wireless keyboard and mouse
12| HDMI input ports| Connect to HDMI source devices
13| USB port| Connect to the USB port of computer by USB-C cable
14| USB-C ports| Connect to USB-C host devices
15| L/R Out| Analog L/R audio output

4×1 Connection Diagram

USB Type-C Features

• DisplayPort Alternate Mode
• Resolution up to 3840×2160@60Hz
• Support reversible plug
• Support USB 2.0

How To Use

1. Setup the connection according to the connection diagram and turn on the power supply.
2. After all the PCs are started in step 1, then you can switch to any PC by keyboard hot keys, IR keys or the key pad on the KVM front panel. (the next section for details)

How To Use Keyboard Hot Keys:

1. Hit Scroll Lock key twice within 2 seconds, the buzzer will beep once when [Scroll Lock] is pressed the second time .
2. After step 1 enter following hot key commands within 3 seconds, the KVM will execute the corresponding commands.

 Select previous input port

 Select next input port

Select port by port number

Enable or disable buzzer sound

Enable or disable fast switching mode (Mouse gesture mode)

If fast switching mode is activated, then double hit left or right bound of the screen with mouse pointer in 1 second, KVM will switch to previous or next input

Turn on auto switching mode

Note: The KVM will automatically loop among all the powered on input source within a specified time interval. Default auto switching time interval is 6 seconds, you are able to change this value by following hot key commands:

Increase or decrease auto switching time interval

Note:1 second per step, the time is up to 250 seconds.

Turn off auto switching mode

Note: Execute this hotkey command to exit auto switching mode.

Turn on/off keyboard and mouse pass through mode

Note: For the best compatibility, it is better to turn on keyboard and mouse pass through mode. In this mode, the keyboard and mouse are dynamically mapped to computer, so you are able to use hot keys, multimedia keys or other customized keys.

How To Change The Hot Keys Combination:

If no [Scroll Lock] key on your keyboard or the [Scroll Lock] key is used for other functionality, you can take [Right-Ctrl] hotkey instead of [Scroll Lock] key by below two methods:

Method 1: Turn on the KVM, 10 seconds later, press the front panel button ‘Select’ until you hear the buzzer is beeping, then restart the KVM.
Method 2: Press the buttons [Scroll Lock]+[Scroll Lock]+[F1], the functions of [Scroll Lock] will be changed to [Right-Ctrl] Or, press the buttons [Right-Ctrl]+[Right-Ctrl]+[F1], the function of [Right-Ctrl] will be changed to [Scroll Lock]

IR Remote Control

1. Switch to input port 1
2. Switch to input port 2
3. Switch to input port 3
4. Switch to input port 4

Note:

1. For the safety request by some express company, the remote control is not equipped battery by default.
2. Unspecified buttons at above are non-functional.

Warranty Information:

We warrant this product as free of defects in material and workmanship for a period of one (1) year from the date of shipment. If during the period of warranty this product proves defective under normal use, we will repair or replace this product, provided that this product has not been subjected to mechanical, electrical, or other abuse or modifications. If it fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for six (6) months from the day of reshipment to the buyer.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>