BMW 1er E87 Seat Occupancy Emulator Instructions
- June 13, 2024
- BMW
Table of Contents
BMW 1er E87 Seat Occupancy Emulator
Mounting instruction for Seat occupancy emulator BMW
- 1 E87 2004 –
- 3 E90, E91, E92, E93 2004 –
The easiest way to mount our emulator is:
-
Plug off your battery
-
Please look for this connectors under your passenger seat:
-
Plug off the connector of the seat mat
-
Mount our emulator (the same connector) instead of your broken passenger seat mat. FINISH!
-
In the next step you have to mount the belt-simulator (Gurt-Simulator). Please continue on page 2.
After correct installation you have to delete the fault-memory of your car in a garage. The garage must connect your car to the “diagnostic-system”. After that the Airbag light goes off.
Important Information
This emulator can be mounted instead of a passenger seat occupancy mat. If it´s installed correctly, the airbag-system works fine and the passenger airbag will open in a accident. The passenger-airbag opens also when the passenger seat is not occupied by a person!
SAFETY INFORMATION
It´s not allowed mounting a child seat if the emulator is installed!!
Mounting Instruction
Belt-Simulator (Gurt-Simulator) for BMW E87, E90, E91, E92, E93
The easiest way to install is under the passenger seat. Please search for this yellow connector and disconnect it:
Then pull off the 3 connectors (2x grey, 1x black):
Now we are looking for the grey connector like in the picture with “L-form”:
Pull off the 2 wires (black & red) with a screw and mount the belt-simulator (Gurt-Simulator) instead of it:
Now you are finished. You can mount the big yellow connector back like in the first step.
Don´t forget: “Click it or ticket”. It´s important to wear the seat belt!!! Don´t forget! It´s your safety!
Documents / Resources
| BMW
1er E87 Seat Occupancy
Emulator
[pdf] Instructions
1er E87 Seat Occupancy Emulator, 1er E87, Seat Occupancy Emulator, Occupancy
Emulator, Emulator
---|---