Fortin Syst mes lectroniques 60591 2000 Chevrolet Corvette Regular Key Remote Starters and Alarm Systems Installation Guide
- June 13, 2024
- Fortin Syst mes lectroniques
Table of Contents
Fortin Systmes lectroniques 60591 2000 Chevrolet Corvette Regular Key
Remote Starters and Alarm Systems
Product Information
Product Name| PK3, Passlock Lock Unlock Arm Disarm Trunk (open) Parking
Lights Tachometer
---|---
Vehicle Compatibility| Chevrolet Corvette, 2000-2004
Transmission Type| Automatic
Firmware Version| 70.[41]
Product Usage Instructions
Mandatory Installation:
HOOD PIN
HOOD STATUS: The hood pin switch must be installed if the vehicle can be
remote started with the hood open. The installation of safety elements is
mandatory. The hood pin is an essential security element and must be
installed. This module must be installed by a qualified technician. A wrong
connection can cause permanent damage to the vehicle.
Description:
The product should be connected as follows:
| Wire Color | Function | Connection Location |
|---|---|---|
| Yellow | (+) Ignition | Ignition harness |
| Purple | (-) Lock | At brake switch connector |
| Purple/White | (-) Unlock | At brake switch connector |
| Green | White | Orange |
| Red/Blue | Light Blue/Black | Black |
| Yellow/Black | Brown/White | Pink/Black |
| Green/White | Green/Red | White/Black |
| Function | Connection Location | |
| (+) PARKING LIGHTS | Brown | |
| (+) ACCESSORY 2 | Brown | |
| (+) IGNITION | Pink | |
| (+) STARTER | Yellow | |
| (+) 12V | Red | |
| (+) ACCESSORY (+) FOOT BRAKE | Orange | White |
Note: The product should be installed by a qualified technician according to the provided instructions.
REGULAR INSTALLATION
**MANDATORY INSTALL
- HOOD PIN
HOOD STATUS :** THE HOOD PIN SWITCH MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
Notice: the installation of safety elements are mandatory. The hood pin
is an essential security element and must be installed.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG CONNECTION
CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
DESCRIPTION
AUTOMATIC TRANSMISSION WIRING CONNECTION
PROGRAMMING PROCEDURE
-
Press and hold the programming button: Connect the 4-PIN Data-link harness (Black connector).
-
The Blue, Red, Yellow and Blue & Red LEDs will alternatively illuminate.
-
Release the programming button when the LED is BLUE.
If the LED is not solid BLUE disconnect the 4-Pin connector (Data-Link) and go back to step 1. -
Insert the required remaining connectors.
-
Turn the key to the Ignition ON/RUN position.
-
The BLUE LED will tum off.
-
The RED LED will tum ON.
-
The RED LED will flash.
-
Start the vehicle and hold at START position for 3 seconds
-
The RED LED will tum off and the YELLOW LED will tum ON.
-
Turn the key to the OFF position
-
The LED will tum OFF.
The mode is now programmed.
Notice: Updated Firmware and Installation Guides
Updated firmware and installation guides are posted on our web site on a
regular basis. We recommend that you update this module to the latest firmware
and download the latest installation guide(s) prior to the installation of
this product.
If the vehicle is not unlocked with one of these conditions the remote-starter will shut down as soon as any door is opened.
WARNING
The information on this sheet is provided on an (as is) basis with no
representation or warranty of accuracy whatsoever. It is the sole
responsibility of the installer to check and verify any circuit before
connecting to it. Only a computer safe logic probe or digital multimeter
should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or
responsibility whatsoever pertaining to the accuracy or currency of the
information supplied. The installation in every case is the sole
responsibility of the installer performing the work and FORTIN
ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever
resulting from any type of installation, whether performed properly,
improperly or any other way. Neither the manufacturer or distributor of this
module is responsible of damages of any kind indirectly or directly caused by
this module, except for the replacement of this module in case of
manufacturing defects. This module must be installed by qualified technician.
The information supplied is a guide only. This instruction guide may change
without notice. Visit www.fortinbypass.com to
get the latest version.
Copyright © 2006-2018, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT
PENDING
TECH SUPPORT
Tél: 514-255-HELP (4357)
1-877-336-7797
ADDENDUM GUIDE
www.fortinbypass.com
WEB UPDATE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>