niko PMxxx-91004 Hue Dimschkelar Dimmer switch User Guide
- June 13, 2024
- niko
Table of Contents
niko PMxxx-91004 Hue Dimschkelar Dimmer switch
Product Information
Product Name:
Dimmer switch xxx-91004 Power
- Consumption: None (battery-free)
- Power Supply: Integrated kinetic energy harvester Number of Configurable Switches: 4 RF Protocol: Modulation / Data rate Direct-Sequence Spread Spectrum (DSSS) with Orthogonal Quadrature Phase Shift Keying (OQPSK) / 250 kbps Mounting Method:
- Wall mounting Mounting Height: 110 cm Weight (Original): 43 g Weight (Intense): 45.6 g Weight (Pure): 119.8 g Temperature (Storage / Operating): N/A Dimensions (HxWxD) (Original): 83 x 83 x 15 mm Dimensions (HxWxD) (Intense): 85 x 85 x 15 mm
- Dimensions (HxWxD) (Pure): 83 x 83 x 15 mm Protection Degree: IP20 Configuration: Philips Hue app Maximum Range (Indoor): 20 m Humidity: N/A Operating Frequency: 2.4 GHz (2404 MHz to 2481 MHz) Maximum RF Power: 7 dBm / 5 mW Antenna:
- Integrated antenna Marking: CE, WEEE
Product Usage Instructions
- Installation:
- Choose the desired mounting location on the wall.
- Use appropriate screws and wall anchors to secure the dimmer switch to the wall.
- Ensure the dimmer switch is mounted at a height of 110 cm.
- Verify that the dimmer switch is securely attached to the wall.
- Configuration:
- Download and install the Philips Hue app on your smartphone or tablet.
- Open the Philips Hue app and follow the on-screen instructions to set up your Philips Hue lighting system.
- Once the system is set up, navigate to the switch configuration section within the app.
- Follow the prompts to configure the dimmer switch and assign it to control specific lights or light groups.
- Usage:
- To turn on or off the lights, press the power button on the dimmer switch.
- To adjust the brightness, rotate the dimmer wheel clockwise or counterclockwise.
- For additional options, such as activating preset scenes or controlling specific light attributes, refer to the Philips Hue app and its available features.
- Troubleshooting:
Problem: The switch is not recognized in the Philips Hue app.
Possible Cause: The switch is out of the range of the Philips Hue light
Proposed Solution: Place the switch closer to the light.
Problem: The switch cannot be configured in the Philips Hue app.
Possible Cause: Misconfiguration in the Philips Hue app.
Proposed Solution: Reconfigure the switch in the Philips Hue app.
Problem: The switch controls the wrong lamp.
Possible Cause: The switch is mounted upside down.
Proposed Solution: Ensure the switch is mounted correctly and verify its configuration in the Philips Hue app. Please note that these instructions are a summary.
For detailed instructions and troubleshooting, refer to the complete user manual provided with the product.
Dimmer switch
xxx-91004
Niko dimmer switch for Hue system
Dimensions
Installation
Dismantling
Configuration
Specifications
- Article number XXX-91004
- Power consumption none (battery-free)
- Power supply integrated kinetic energy harvester
- Number of configurable switches 4
- RF protocol Zigbee® (Green Power)
- Modulation / Data rate Direct-Sequence Spread Spectrum (DSSS) with Orthogonal Quadrature Phase Shift Keying (OQPSK) / 250 kbps
- Mounting method wall mounting
- Mounting height 110 cm
- Weight (Original) 43 g
- Weight (Intense) 45.6 g
- Weight (Pure) 119.8 g
- Temperature (storage / operating) -25 – +65 °C*
- Dimensions (HxWxD) (Original) 83 x 83 x 15 mm
- Dimensions (HxWxD) (Intense) 85 x 85 x 15 mm
- Dimensions (HxWxD) (Pure) 83 x 83 x 15 mm
- Protection degree IP20
- Configuration Philips Hue app
- Maximum range (indoor) 20 m
- Humidity 0 – 95 % relative humidity, non-condensing
- Operating frequency 2.4 GHz (2404 MHz to 2481 MHz)
- Maximum RF power 7 dBm / 5 mW
- Antenna integrated antenna
- Marking CE, WEEE
The maximum temperature difference between the Niko dimmer switch and a receiver should not exceed 40 °C
Troubleshooting
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80 support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up-to-date as possible.
References
Read User Manual Online (PDF format)
Loading......