Godox AD-S200 Stick Flash Head User Manual

Godox AD-S200 Stick Flash Head

Foreword

Thank you for purchasing! Stick Light Flash Head AD-S200 has a compact structure, 200Ws strong power and convenient installing method. It can be collocated with AD200/AD200P ro with a simple push, quite suitable for portrait shooting, studio shooting, jewelry shooting, medical shooting, outdoor shooting, etc.

WARNING

• A Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
• A Keep out of reach of children.
• A Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, electric shock may occur if you touch the electronic parts inside it. A Do not leave or store the flash unit if the ambient temperature reads over 50°C.
• A Do not fire the flash directly into the eyes (especially those of babies) within short distances. Otherwise, visual impairment may occur. Do not use the flash unit in the presence of flammable gases, chemicals and other similar materials. In certain circumstance, these materials may be sensitive to the strong light emitting from this flash unit and fire or electromagnetic interference may result.
• In certain circumstance, please pay attention to the relevant warnings.
• A Always keep this product dry. Do not use in rain or in damp conditions.
• A Turn off the devices immediately in the event of malfunction.

Name of Parts

1. Flash Tube
2. Power Cable
3. Male Port of Power Socket
4. Hood

What’s Inside

Instructions for Use

1. Connecting to Pocket Flash
   AD200/AD200Pro Insert the male port of power socket of AD-S200 into the female port of AD200/AD200Pro flash head, push forward to connect.

2. Detaching AD-S200
   Press the locking button of AD200/AD200Pro and pull out the male port of power socket of AD-S200.

3. Detaching Hood
   Turn off the flash, hold the upper back of the hood with your left hand, press your right thumb against the edge of the clamp ring and break it slightly to the right while pulling the flash tube upwards.
   Note: Please do not use brute force.

Technical Data

Changes made to the specifications or designs may not be reflected in this manual.

Maintenance

Shut down the device immediately should abnormal operation be detected. Avoid sudden impacts and the product should be dedusted regularly. It is normal for the light beads to be warm when in use. Avoid continuous flashes if unnecessary. Maintenance of the light must be performed by our authorized maintenance department which can provide original accessories. This product, except consumables, is supported with a one-year warranty. Unauthorized service will void the warranty. If the product had failures or was wetted, do not use it until it is repaired by professionals. Changes made to the specifications or designs may not be reflected in this manual.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Declaration of Conformity

GODOX Photo Equipment Co,Ltd. hereby declares that the This equipment are in compliance with the essential requirements and other relevant provisions of EU Directive 2014/35/EU‹2014/30/EU. They are allowed to be used in all EU member states. For more information of DoC, Please click this web
https://www.godox.com/eu-declaration-of-conformity/

Warranty

Dear customers, as this warranty card is an important certificate to apply for our maintenance service, please fill in the following form in coordination with the seller and safe-keep it. Thank you!

Note: This form shall be sealed by the seller.

Applicable Products
The document applies to the products listed on the Product Maintenance Information (see below for further information). Other products or accessories (e.g. promotional items, giveaways and additional accessories attached, etc.) are not included in this warranty scope.

Warranty Period
The warranty period of products and accessories is implemented according to the relevant Product Maintenance Information. The warranty period is calculated from the day(purchase date) when the product is bought for the first time, And the purchase date is considered as the date registered on the warranty card when buying the product.

How to Get the Maintenance Service
If maintenance service is needed, you can directly contact the product distributor or authorized service institutions. You can also contact the Godox after-sale service call and we will offer you service. When applying for maintenance service, you should provide valid warranty card. If you cannot provide valid warranty card, we may offer you maintenance service once confirmed that the product or accessory is involved in the maintenance scope, but that shall not be considered as our obligation.

Inapplicable Cases
The guarantee and service offered by this document are not applicable in the following cases:

• The product or accessory has expired its warranty period; Breakage or damage caused by inappropriate usage, maintenance or preservation, such as improper packing, improper usage, improper plugging in/out external equipment, falling off or squeezing by external force, contacting or exposing to the improper temperature, solvent, acid, base, flooding and damp environments, etc;
• Breakage or damage caused by non-authorized institution or staff in the process of installation, maintenance, alternation, addition and detachment;
• The original identifying information of product or accessory is modified, alternated, or removed;
• 5 No valid warranty card;
• Breakage or damage caused by using illegally authorized, nonstandard or non-public released software;
• Breakage or damage caused by force majeure or accident;
• Breakage or damage that could not be attributed to the product itself. Once met these situations above, you should seek solutions from the related responsible parties and Godox assumes no responsibility. The damage caused by parts, accessories and software that beyond the warranty period or scope is not included in our maintenance scope. The normal discoloration, abrasion and consumption are not the breakage within the maintenance scope.

Maintenance and Service Support Information
The warranty period and service types of products are implemented according to the following Product Maintenance Information:

Godox After-sale Service Call +86-755-29609320(8062)

Wechat Official Account

7-2960908062
0755-25723423
godox@godox.com GODOX Photo Equipment Co.,Ltd.
Add.: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China
Tel: +86-755-29609320(8062)
Fax: +86-755-25723423
E-mail: godox@godox.com godox.com
Made in China | 705-ADS200-00 US CEFC I

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>