SONOFF RM433R2 433MHz Remote Controller User Manual
- June 4, 2024
- SonOFF
Table of Contents
SONOFF RM433R2 433MHz Remote Controller
Pull out the battery insulation sheet
The device has the version with battery and without battery.
Specifications
- Model RM433R2
- RF 433MHz
- Remote controller size 87x4Sx12mm
- Remote controller base size 86x86x15mm (not included)
- Power supply 3V button cell x 1 (Battery model: CR2450)
- Material PC VO
Product Introduction
The RM433R2 applies to all SON OFF products with 433M Hz frequency and other devices supporting the 433M Hz communication protocol.
Buttons are created with different functions when pairing with different products.
Buttons Instructions
Example 1: iFan04 Wi-Fi Fan & Light Controller
Example 2: D1 Wi-Fi smart dimmer
Works with SON OFF devices
- RFR2
- BASICRFR3
- 4CHPROR3
- SlampherR2
- RF BridgeR2
- D1 Wi-Fi smart dimmer
- TX series Wi-Fi smart switches
- iFan04 Wi-Fi Fan & Light Controller
RM433R2-BASE
Installation method 1:
Install the base on the wall with 3M adhesive tapes.
Installation method 2:
Remove the two upper covers from both sides of the base to install with
screws.
86 type mounting box
The base is not included into the package, please purchase it separately.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>