CHAUVET PROFESSIONAL Maverick Storm 1 Hybrid Spot Beam Wash User Manual

June 13, 2024
Chauvet Professional

Maverick Storm 1 Hybrid Spot Beam Wash
User Manual

Maverick Storm 1 Hybrid Spot Beam Wash

Model ID: MAVERICKSTORM1HYBRID

Edition Notes
The Maverick Storm 1 Hybrid User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the Maverick Storm 1 Hybrid as of the release date of this edition.
Trademarks
Chauvet, Chauvet Professional, the Chauvet logo, Maverick, and Maverick Storm are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.
Copyright Notice
The works of authorship contained in this manual, including, but not limited to, all designs, text, and images are owned by Chauvet.
© Copyright 2023 Chauvet & Sons, LLC. All rights reserved.
Electronically published by Chauvet in the United States of America.
Manual Use
Chauvet authorizes its customers to download and print this manual for professional information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from Chauvet.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to scale the content accordingly.
Intended Audience
Any person installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.
Disclaimer
Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetprofessional.com.
Document Revision
This is revision 3 of the Maverick Storm 1 Hybrid User Manual. Go to www.chauvetprofessional.com for the latest version.

Before You Begin

What Is Included

  • Maverick Storm 1 Hybrid
  • Sermonic Power on IP65 power cable
  • 2 Omega brackets with mounting hardware
  • Quick Reference Guide

Claims
Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate a claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.
Text Conventions

Convention 1-512 Meaning
50/60 A range of values
Settings A set of values of which only one can be chosen
A menu option not to be modified
Symbols Akey to be pressed on the product’s control panel

Symbol

Symbol Meaning
Critical installation, configuration, or operation information. Not

following these instructions may make the product not work, cause damage to the product, or cause harm to the operator.
****| Important installation or configuration information. The product may not function correctly if this information is not used.
| Useful information.

** Any reference to data or power connections in this manual assumes the use of Sermonic IP rated cables.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol.
Safety Notes
Read all the following safety notes before working with this product. These notes contain important information about the installation, usage, and maintenance of this product.
**
This product contains no user-serviceable parts. Any reference to servicing in this User Manual will only apply to properly trained, certified technicians. Do not open the housing or attempt any repairs.
**** All applicable local codes and regulations apply to proper installation of this product.

  • The luminaire is intended for professional use only.
  • The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 32.81 ft (10 m) is not expected.
  • If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or its service agent.
  • The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similar qualified person.
  • CAUTION:
  • This product’s housing may be hot when operating. Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
  • When transferring the product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow the product to fully acclimate to the surrounding environment before connecting it to power.
  • Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding notification of strobe use.
  • ALWAYS:
  • Disconnect from power before cleaning the product or replacing the fuse.
  • When using an IP65-rated product in an outdoor environment, use IP65- (or higher) rated power and data cable.
  • Replace and secure IP-rated protective covers to all power, data, USB, or other ports when not in use.
  • Replace the fuse with the same type and rating.
  • Use a safety cable when mounting this product overhead.
  • Connect this product to a grounded and protected circuit.
  • DO NOT:
  • Open this product. It contains no user-serviceable parts.
  • Look at the light source when the product is on.
  • Leave any flammable material within 20 cm of this product while operating or connected to power.
  •  Connect this product to a dimmer or rheostat.
  • Operate this product if the housing, lenses, or cables appear damaged.
  •  Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine.
  • Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not limited to:
  •  Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
  •  Locations where normal temperatures exceed the temperature ranges in this manual.
  • Locations that are prone to flooding or being buried in snow.
  • Other areas where the product will be subject to extreme radiation or caustic substances.
  • ONLY use the handles or the hanging/mounting brackets to carry this product.
  • The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
  • The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
  • The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
  • To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
  • In the event of a serious operating problem, stop using immediately.

If a Chauvet product requires service, contact Chauvet Technical Support.
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning for North America and Australia
Waming! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and the user. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Expected LED Lifespan
Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity.

Introduction

Description
The Maverick Storm 1 Hybrid brings the latest Maverick series IP65 technology together with an advanced optical system designed to optimize output from its Osram 420W 7700K source. This combination Beam/ Spot/Wash fixture delivers stadium-scale output and CMY color mixing that produces the boldest reds, greens and blues while perfectly matching its fellow Mavericks in the rig. Linear zoom smoothly delivers precise coverage in both projection modes, from tightly focused beams to crisp even spots, offering a
zoom range of 0.8° to 25.6° in Beam mode and 1.3° to 40.8° in Spot mode. This hybrid houses a full arsenal of features: static and rotating gobo wheels, stackable independent prisms, animation wheel and a heavy frost to shift to a distinctive wash. The Maverick Storm 1 Hybrid works with DMX, Art-Net™, sac, RDM and Lumen radio CRMX™.
Features

  • Fully featured, IP65 rated, high powered Spot/Beam/Wash combination fixture with an Osram 420W, 7700 K with 2,500 hour life expectancy lamp, CMY color mixing, an animation wheel, 2 gobo wheels 2 lacerable prisms, large zoom range, and lightweight alumlnumlmagneslum housing
  • Individually controllable and lacerable 5 facet linear and 8 facet round prisms for maximizing visual impact
  • Frost and beam flattening options for even light distribution
  • Tight 0.8° narrow beam angle for focused air effects
  • Linear zoom of 0.8° to 25.6° in beam mode, 1.3° to 40.8° in spot mode
  • 9 rotating and 17 static gobos for massive visual effect
  • DMX and RDM protocol control
  • True 1 compatible power input
  • Easy to read OLED display with simple, effective menu options
  • Simple and complex DMX channel profiles for programming versatility
  • USB-C port for uploading software
  • Failsafe Ethemet connectivity allows for data to pass even if fixture power is lost

Product Overview

Product Dimensions

Setup

AC Power
The Maverick Storm 1 Hybrid has an auto-ranging power supply and it can work with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.
The listed current rating indicates the product’s average current draw under normal conditions.

  • Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure the product has an appropriate electrical ground to avoid the risk of electrocution or fire.
  • **** To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.

** Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug
** The Maverick Storm 1 Hybrid comes with a power input cable terminated with a Sermonic Power on A connector on one end and an Edison plug on the other end (U.S. market). If the cable has no plug otitis necessary to change the plug, use the table below to wire a plug.

Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow or Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green

Fuse Replacement

  1. Disconnect this product from the power outlet.
  2. Using a flat-head screwdriver, unscrew the fuse holder cap from the housing.
  3. Remove the blown fuse and replace with another fuse of the same type and rating (F 15 A, 250 V).
  4. Screw the fuse holder cap back in place and reconnect power.

Remote Device Management
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers have this capability. The Maverick Storm 1 Hybrid supports RDM protocol that allows feedback to make changes to menu map options.
USB Software Update
The Maverick Storm 1 Hybrid allows for software update through USB using the built-in USB port. To update the software using a USB type C flash drive, do the following:

  1. Power on the product and plug the flash drive into the USB port.

  2. Once the flash drive has been detected, the message “USB UPDATE” will be displayed. Press .

  3. The next screen will show the software versions available for this fixture on the USB drive. If the user has multiple versions of software for the same fixture, arrow down to the version desired to load. Press .

  4. The “USB UPDATE” screen will re-appear. Press .
    ****  It is possible to update multiple units with the USB if they are daisy chained via DMX.

  5. The upgrade will start. DO NOT turn off the power or disconnect the USB while the USB LED is still blinking during the process. The screen display will read: “USB Update Wait”. USB update can take several minutes to complete.
    When the USB firmware is done uploading, in some fixtures the display will change to: “DO NOT UNPLUG, UPDATING”

  6. When the update is complete, the fixture will automatically reboot.

  7. Go to the Fixture Information on the product’s menu map and confirm the firmware revision

  8. When the boot-up process is finished, restart the product.

  • **** Place the .chl format file in the root folder of the USB drive.
  • The product’s USB port supports up to 32GB capacity and only works with FAT32 file format.
    **** Turning off the power or removing the USB while still blinking during the update will cause partial or total firmware failure in the targeted fixture(s). If this occurs, the user will A need the UPLOAD 08 device to fix this. Please contact Chauvet regarding this device.

Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For the Chauvet Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.

  • Before deciding on a location for the product, make sure there is easy access to the product for maintenance and programming purposes.
  • Make sure that the structure onto which the product is being mounted can support the product’s weight (See the Technical Specifications for weight information).
  • When mounting the product overhead, always use a safety cable. Mount the product securely to a rigging point, whether an elevated platform or a truss.
  • When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

Procedure
The Maverick Storm 1 Hybrid comes with 2 omega brackets to which the user can directly attach mounting clamps (sold separately). Make sure the clamps are capable of supporting the weight of this product. Use at least two mounting points per product. For the Chauvet Professional line of mounting clamps, go to http://www.trusst.com/products.
Mounting Diagram

CHAUVET PROFESSIONAL Maverick Storm 1 Hybrid Spot Beam Wash - Mounting
Diagram

Signal Connections
The Maverick Storm 1 Hybrid can receive a DMX, Art-Net™, or sACN, signal. The Maverick Storm 1 Hybrid has two Amphenol XLRnet through ports, and 5-pin DMX in and out ports. If using other compatible products with this product, it is possible to control each individually with a single controller.
Control Personalities
The Maverick Storm 1 Hybrid uses a 5-pin DMX data connection, Lumen radio CRMX™, Art-Net™, or sac for its two control personalities: Dmx Mode 24 CH and Dmx Mode 29 CH.

  • Refer to the Operation chapter to learn how to configure the Maverick Storm 1 Hybrid to work in these personalities.
  • The Control Channel Assignments and Values section provides detailed information regarding the control personalities.

For more information about DMX standards or the DMX cables needed to link this product to a DMX controller, download the DMX Primer from the Chauvet website: www.chauvetprofessional.com.
DMX Linking
The Maverick Storm 1 Hybrid can link to a DMX controller using a 5-pin DMX connection or a Lumen radio CRMX™ connection. For more information about DMX, read the DMX primer at:
https://www.chauvetprofessional.com/wp- ontent/uploads/2016/06/DMX_Primer.pdf.
Art-Net™ Connection
Art-Net™ is an Ethernet protocol that uses TCP/IP that transfers a large amount of DMX512 data using an Amphenol XLRnet RJ45 connection over a large network. An Art-Net™ protocol document is available from www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
SACN Connection
Streaming ACN (Architecture for Control Networks), also known as ANSI E1.31, is an Ethernet protocol that uses the layering and formatting of ACN to transport DMX512 data over IP or any other ACN-compatible network.
Connection Diagram

CHAUVET PROFESSIONAL Maverick Storm 1 Hybrid Spot Beam Wash - Connection
Diagram

Lamp Replacement
The Maverick Storm 1 Hybrid is equipped with an OSRAM SIRIUS HRI 420 W lamp. Follow the procedure below to safely change the lamp.
** Disconnect the product from power before performing this procedure.
Procedure**

  1. Tum the product off and disconnect it from power. Wait at least 15 minutes for the lamp to cool down.
  2. Loosen the 4 indicated screws with a 4 mm hex key until the bottom plate can be removed.
  3. Carefully remove the bottom plate and heat sink and allow it to hang by the safety cord.
  4. Remove the 2 wires connected to the lamp by the flag terminals.CHAUVET PROFESSIONAL Maverick Storm 1 Hybrid Spot Beam Wash - Lamp Replacement 1
  5. Loosen the 2 indicated screws with a Phillips-head screwdriver.
  6. Using the lamp base, push the lamp away from the loosened plate.CHAUVET PROFESSIONAL Maverick Storm 1 Hybrid Spot Beam Wash - Setup
  7. Slide the loosened plate away from the lamp.
  8. Roll the lamp out and pull it away.
  9. Reverse the steps above to install the new lamp. DO NOT touch the glass with bare hands!

** DO NOT turn the product on without a lamp!
Increasing Lamp Lifespan**

  •  ALWAYS turn the lamp off by using the DMX controller or the product’s control panel, then wait at least 5 minutes before switching off the product. This will keep the fans running to extract any remaining heat from the product’s head.
  • DO NOT power cycle the product unless it is necessary.
  • DO NOT re-strike the lamp immediately after turning it off. It is recommended to wait 5 minutes before trying to re-strike the lamp.
  • DO NOT touch the lamp without wearing gloves to avoid leaving grease on the bulb or on the contacts that could reduce the lamp’s life.
  • ALWIAYS change the lamp when it has reached its recommended lifespan to avoid the risk of lamp explosion.

Operation

Control Panel Description

Button Name Function
Navigates upwards through the menu list or increases the value when

in a function
|

| Exits from the current menu or function
| <DOWN?>| Navigates downwards through the menu list or decreases the value when in a function
| | Navigates leftwards through the menu list
| | Enables the currently displayed menu or sets the selected value into the function
| | Navigates rightwards through the menu list

Battery Powered Display
The Maverick Storm 1 Hybrid has a battery powered display which enables access to the menu when the product is powered off. Press and hold

until the display activates (approximately 15 seconds).

Home Screen
The Maverick Storm 1 Hybrid has a home screen that shows the current control protocols, personalities, starting addresses, IP addresses, and universes. To see the home screen, press

repeatedly until it shows on the display. From the home screen, touch any of the displayed control settings to immediately jump to that part of the menu, such as the personality, starting address, or universe, or press to reach the main menu.
Control Panel Lock
The setting locks or unlocks the control panel.

  1. Go to the Settings main level.
  2. Select the Lock Screen option.
  3. Select NO (control panel stays unlocked) or YES (locks control panel).

When the control panel lock is activated, the product will prompt for the passcode in order to access the menu. Enter the passcode as described below.
Passcode
After being prompted to enter the passcode, enter the numbers 0920.
Technician Mode
The technician mode disables the pan tilt motors, allowing the output of the product to be aimed by hand. To enable the technician mode of the Maverick Storm 1 Hybrid, hold and while the product is powering on. When the product is turned off and back on, the pan and tilt will return to normal function.

Menu Map
Refer to the Maverick Storm 1 Hybrid product page on www.chauvetprofessional.com for the latest menu map.

Main Level Programming Levels Description
Address 001-512 Sets the starting address

Network
Setup| IP Mode| Manual| Manually set IP address
DHCP| Network sets IP address
Static| Product sets IP address
Universe| 000-255 (Art-Net Tr’)
001-256 (sACN)| Sets the universe
Ip| . .  (000-255)| Sets the IP address in Manual mode
SubMask| A A  (000-255)| Sets the Subnet Mask in Manual mode
Personality| Dmx Mode 24 CH| NO
YES| Selects the 24-channel mode
Dmx Mode 29 CH| Selects the 29-channel mode
Settings| Control Mode| DMX| Selects the DMX control protocol
WDMX| Selects Lumen radio CRMXTM
ArtNet| Selects the Art-Net* control protocol
sACN| Selects the sac control protocol
Pan Reverse| NO| Normal pan
YES| Reversed pan
Tilt Reverse| NO| Normal tilt
YES| Reversed tilt
Screen
Reverse| NO| Normal screen display
YES| Inverted screen display
AUTO| Automatic display orientation
Pan Angle| 540| 540° pan range
360| 360° pan range
180| 180° pan range
Tilt Angle| 270| 270° tilt range
180| 180° tilt range
90| 90° tilt range
BL. 0. P/T
Move| NO| Enable/disable blackout while panning/ tilting
YES
BL. O. Color
Move| NO| Enable/disable blackout while color wheel is moving
YES
BL. 0. Gobo
Move| NO| Enable/disable blackout while gobo wheels are moving
YES
Lock Screen| NO| Lock the buttons Passcode: 0920
YES
Swap XY| NO| Do not swap pan and tilt
YES| Pan controls tilt, tilt controls pan
WDMX Reset| NO| Do not reset WDMX
YES| Reset WDMX
Backlight Timer| 30S| Display turns off after 30 seconds
1M| Display turns off after 1 minute
5M| Display turns off after 5 minutes
ON| Display stays on
Loss f D t| Hold| Holds last signal received
Close| Blacks out fixture
Main Level| Programming Levels| Description
---|---|---
Settings (cont )| Lamp Setting| On/Off| OFF| Turns lamp on/off
ON
State/Power on| OFF| Defines the status of lamp when powering up product
ON
Off Via Dmx| NO| Turns off the unit via DMX controller
YES
On If Dmx on| NO| Turns lamp on when DMX signal is detected
YES
Off If Dmx Off| NO| Turns lamp off when DMX signal is lost
YES
Ignition Delay| 010-255| Sets the delay duration between product power on and lamp power on
Low Power Delay| 000-255| Sets the delay duration when shutter is closed and lamp enters lower power state
Reset Lamp Time| NO| Leaves lamp time unchanged
RESET| Resets lamp timer to
Maintenance Timer| Interval| 010-250| Defines amount of hours between maintenance
Remain Time| NO| Shows maintenance timer. Select RESET to reset.
RESET
Preset Select| PRESET A| Recorded preset menu options
PRESET B
PRESET C
Preset Sync| NO| Transfers recorded preset menu options to other Maverick Storm 1 Hybrid fixtures in the DMX daisy chain
YES
USB Update| NO| Update firmware via USB C
YES
Min Zoom
Focus| NO| Enables/disables Minimum Zoom Focus
YES
Reset Function| Pan/Tilt| NO
YES| Reset individual functions or all functions from start-up
Shutter/Prism
Color/CMY
Gobo/ Animation
Zoom/Focus/ Frost
All
Factory Settings| NO| Reset to factory default settings
YES
Test|

Manual Test

| Auto Test| Auto test all functions
Pan| 0-255| Manually control and test all settings through the control panel
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Main Level| Programming Levels| Description
---|---|---
Test (cont )| Manual Test (cant.)| Shutter| 0-255| Manually control and test all settings through the control panel
Cyan
Magenta
Yellow
Color
Gobo2
Gobo
Gobo Rotate
Gobo Rotate
Fine
Animation
Prism1
Prism1 Rotate
Prism2
Prism2 Rotate
Frost1
Beam
Diffraction
Focus
Focus Fine
Focus Auto
Zoom
Zoom Fine
Special
Function
Information| Fixture Information| Ver V| Shows firmware version
Running Mode| Shows current running mode
DMX Address| Shows current starting address
Temperature| Shows current product temperature
Fixture Hours| Shows hours product has been on
Imp|   Shows current IP address
Sub Mask| Shows current Subnet Mask
MAC|  Shows MAC address
UID|   Shows product UID
Lamp On Time| Shows lamp on time
Remain Time| Shows lamp maintenance time
Fan Information| Lamp MFan1-3 Speed | Shows speed of each fan in rpm
Shows electrical data
BFan1-2 Speed  
ZFan1 Speed

FFan1-7 Speed  

AFan1 Speed
Base Fan1-3 Speed
Power
Voltage — — —
Error Information| Current . A Gravity| Shows product orientation
Shows any errors, or No Error!
Main Level| Programming Levels| Description
---|---|---
Information (cont )| Channel Information| Frequency| 000-255| Shows all current values from input signals
Pan
Pan Fine
Tilt
Tilt Fine
P/T Speed
Dimmer
Dimmer Fine
Shutter
Cyan
Magenta
Yellow
Color
Gobo2
Gobo
Gobo Rotate
Gobo Rotate
Fine
Animation
Prism1
Prism1 Rotate
Prism2
Prism2 Rotate
Frost1
Beam
Diffraction
Focus
Focus Fine
Focus Auto
Zoom
Zoom Fine
Special
Function

DMX Configuration
Use control configurations to operate the product with a DMX, Art-Net™, or sACN controller.
Control Mode
The Maverick Storm 1 Hybrid works with wired DMX, Lumen radio CRMX™, Art-Net™, and sACN control signals. To select which protocol to use:

  1. Go to the Settings main level.
  2. Select the Control Mode option.
  3. Select the desired protocol, from DMX, Anent, sac, or WDMX (for Lumen radio CRMX™).

Control Personalities
To set the control personality:

  1. Go to the Personality main level.
  2. Select the desired personality, from Dmx Mode 24 CH or Dmx Mode 29 CH.
    • See the Starting Address section for the highest selectable starting address for each personality.
    • Make sure that the starting addresses on the various products do not overlap due to the new personality setting.

Starting Address
Each product will respond to a unique starting address from the controller. All products with the same starting address will respond in unison. To set the starting address:

  1. Go to the Address main level.
  2. Select the starting address (001-512).
    •  The highest recommended starting address for Dmx Mode 24 CH is 489.
    •  The highest recommended starting address for Dmx Mode 29 CH is 484.

Network Setup
The Network Setup settings control the IP address, subnet mask, and universe of the product.
IP Mode
To choose how the IP address is set:

  1. Go to the Network Setup main level.
  2. Select the IP Mode option.
  3. Select the desired IP mode, from Manual (to set a custom IP address), DHCP (the IP address is assigned by the connected network), or Static (the product uses a default, preset IP address).

Universe
To assign an Art-Net™ or sACN universe to the Maverick Storm 1 Hybrid:

  1. Go to the Network Setup main level.
  2. Select the Universe option.
  3. Set the universe, from 000-255 (for Art-Net™) or from 001-256 (for sACN).

Manual IP Address
To set the IP address when the IP Mode is set to Manual:

  1. Go to the Network Setup main level.
  2. Select the Ip option.
  3. Set the 4 values of the IP address from 000-255.

Subnet Mask
To set the subnet mask:

  1. Go to the Network Setup main level.
  2. Select the Sub Mask option.
  3. Set the 4 values of the subnet mask from 000-255.

Control Channel Assignments and Values

24CH 29CH Function Value Percent/Setting
1 1 Pan 000 255 0-100%
2 2 Fine pan 000 255 Fine control (16-bit)
3 3 Tilt 000 255 0-100%
4 4 Fine tilt 000 255 Fine control (16-bit)
5 5 Pan/tilt speed 000 255 Fast to slow
6 6 Dimmer 000 255 0-100%
7 Fine dimmer 000 255 Fine control (16-bit)

7

|

8

|

Strobe

| 000 007| Off
008 015| On
016 131| Synchronized strobe, slow to fast
132 167| 0-100% strobe, slow to fast
168 203| 100-0% strobe, slow to fast
204 239| Pulse strobe, slow to fast
240 250| Random strobe, slow to fast
251 255| On
8| 9| Cyan| 000 255| 0-100%
9| 10| Magenta| 000 255| 0-100%
10| 11| Yellow| 000 255| 0-100%
11| 12| Color wheel| 000 001| Open
002 003| Color 1 (red)
004 005| Color 2 (orange)
006 007| Color 3 (cyan)
008 009| Color 4 (lime)
010 011| Color 5 (yellow)
012 013| Color 6 (green)
014 015| Color 7 (magenta)
016 017| Color 8 (blue)
018 019| Color 9 (amber)
020 021| Color 10 (light blue)
022 023| Color 11 (CTO)
024 025| Color 12 (CTB)
026 027| Color 13 (UV)
028 029| Frost
030 031| Open
032 187| Color wheel indexing
188 219| Color scroll, fast to slow
220 223| Stop
224 255| Reverse color scroll, slow to fast
24CH| 29CH| Function| Value| Percent/Setting
---|---|---|---|---
12| 13| Gobo wheel 2 (Beam mode) (see Gobo Wheels)| 000 003| Open
004 006| Gobo 1
007 009| Gobo 2
010 012| Gobo 3
013 015| Gobo 4
016 018| Gobo 5
019 021| Gobo 6
022 024| Gobo 7
025 027| Gobo 8
028 030| Gobo 9
031 033| Gobo 10
034 036| Gobo 11
037 039| Gobo 12
040 042| Gobo 13
043 045| Gobo 14
046 048| Gobo 15
049 055| Gobo 16
056 059| Open
060 063| Gobo 1 shaking, slow to fast
064 067| Gobo 2 shaking, slow to fast
068 071| Gobo 3 shaking, slow to fast
072 075| Gobo 4 shaking, slow to fast
076 079| Gobo 5 shaking, slow to fast
080 083| Gobo 6 shaking, slow to fast
084 087| Gobo 7 shaking, slow to fast
088 091| Gobo 8 shaking, slow to fast
092 095| Gobo 9 shaking, slow to fast
096 099| Gobo 10 shaking, slow to fast
100 103| Gobo 11 shaking, slow to fast
104 107| Gobo 12 shaking, slow to fast
108 111| Gobo 13 shaking, slow to fast
112 115| Gobo 14 shaking, slow to fast
116 119| Gobo 15 shaking, slow to fast
120 123| Gobo 16 shaking, slow to fast
124 127| Open
128 189| Gobo scroll, fast to slow
190 193| Stop
194 255| Reverse gobo scroll, slow to fast
24CH| 29CH| Function| Value| Percent/Setting
---|---|---|---|---
13| 14| Gobo wheel 1 (Spot mode) (see Gobo Wheels)| 000 001 005 006 011 012 a) 017 018 023| Open Open spot mode
Gobo 1
Gobo 2
Gobo 3
024 029| Gobo 4
030 035| Gobo 5
036 041| Gobo 6
042 047| Gobo 7
048 063| Gobo 8
064 069| Gobo 8 shaking, slow to fast
070 075| Gobo 7 shaking, slow to fast
076 081| Gobo 6 shaking, slow to fast
082 087| Gobo 5 shaking, slow to fast
088 093| Gobo 4 shaking, slow to fast
094 099| Gobo 3 shaking, slow to fast
100 105| Gobo 2 shaking, slow to fast
106 111| Gobo 1 shaking, slow to fast
112 127| Open spot mode
128 191| Gobo scroll, fast to slow
192 255| Reverse gobo scroll, slow to fast
000 063| Gobo indexing
064 145| Gobo rotation, fast to slow
14| 15| Gobo 1 rotation| 146 149| Stop
150 231| Reverse gobo rotation, slow to fast
232 255| Gobo bounce, short to long
—| 16| Gobo 1 fine indexing| 000 255| Gobo fine indexing
000 001| No function
15| 17| Animation wheel| 002 124| Animation effect, fast to slow
125 130| Stop
131 255| Reverse animation effect, slow to fast
16| 18| Prism 1| 000 004| No function
005 255| Prism insert
000 127| Prism index
17| 19| Prism 1 rotate| 128 189| Prism rotation, fast to slow
190 193| Stop
194 255| Reverse prism rotation, slow to fast
18| 20| Prism 2| 000 004| No function
005 255| Prism insert
000 127| Prism index
19| 21| Prism 2 rotate| 128 189| Prism rotation, fast to slow
190 193| Stop
194 255| Reverse prism rotation, slow to fast
20| 22| Frost| 000 255| 0-100%
000 003| No function
21| 23| Beam diffraction| 004 255| 0-100%
22| 24| Focus| 000 255| 0-100%
24CH| 29CH| Function| Value| Percent/Setting
---|---|---|---|---
—| 25| Fine focus| 000 255| Fine control (16-bit)
—| 26| Auto focus| 000 010| No function
011 059| 5 meters
060 108| 10 meters
109 157| 15 meters
158 206| 20 meters
207 255| Auto-detect distance
23| 27| Zoom| 000 255| Zoom, wide to narrow
—| 28| Fine zoom| 000 255| Fine control (16-bit)
24| 29| Control (3 second hold)| 000 029| No function
030 039| Pan/tilt swap on
040 049| Pan/tilt swap off
050 069| No function
070 079| Pan/tilt blackout on
080 089| Pan/tilt blackout off
090 099| Color wheel blackout on
100 109| Color wheel blackout off
110 119| Gobo wheel blackout on
120 129| Gobo wheel blackout off
130 139| Lamp on
140 149| Pan/tilt reset
150 159| Color wheel/CMY reset
160 169| Gobo/animation wheels reset
170 179| Shutter/prism reset
180 189| No function
190 199| Zoom/focus/frost reset
200 209| All reset
210 219| Blackout on
220 229| Blackout off
230 239| Lamp off
240 255| No function

CHAUVET PROFESSIONAL Maverick Storm 1 Hybrid Spot Beam Wash -
Fig1l

Configuration Settings
Pan Reverse
To set the orientation of the pan:

  1. Go to the Settings main level.
  2. Select the Pan Reverse option.
  3. Select from NO (normal pan motion), or YES (reversed pan motion).

Tilt Reverse
To set the orientation of the tilt:

  1. Go to the Settings main level.
  2. Select the Tilt Reverse option.
  3. Select from NO (normal tilt motion), or YES (reversed tilt motion).

Screen Reverse
To set the orientation of the display:

  1. Go to the Settings main level.
  2.  Select the Screen Reverse option.
  3. Select from NO (right-side up), YES (upside-down), or AUTO (automatic orientation).

Pan Angle
To set the maximum angle of the pan:

  1. Go to the Settings main level.
  2. Select the Pan Angle option.
  3. Select from 540 (540°), 360 (360°), or 180 (180°).

Tilt Angle
To set the maximum angle of the flit:

  1. Go to the Settings main level.
  2. Select the Tilt Angle option.
  3. Select from 270 (260°), 180 (180°), or 090 (90°).

Black out on Movement
To set the product to black out while the pant tilt, color wheel, or gobo wheels are moving:

  1. Go to the Settings main level.
  2. Select from the BL. O. P/T Move (black out on pan/tilt movement), BL. O. Color Move (black out on color wheel movement), or BL. O. Gobo Move (black out on gobo wheel movement) options.
  3. Select from NO or YES.

Swap Pan and Tilt
To swap the controls for the pan and tilt:

  1. Go to the Settings main level.
  2. Select the Swap XY option.
  3. Select from NO (pan controls pan, tilt controls tilt) or YES (pan controls tilt, tilt controls pan).

WDMX Reset
To reset the WDMX connection:

  1. Go to the Settings main level.
  2. Select the WDMX Reset option.
  3. Select from NO or YES.

Display Backlight Timer
To set how long before an inactive display will turn off:

  1. Go to the Settings main level.
  2. Select the Backlight Timer option.
  3. Select the length of the backlight timer, from 30S (30 seconds), 1M (1 minute), 5M (5 minutes), or ON (always on).

Loss of Data
To select how the product will respond to a loss of the control signal:

  1. Go to the Settings main level.
  2. Select the Loss of Data option.
  3. Select from Hold (holds last signal received) or Close (blacks out fixture).

Lamp Settings
To access the lamp settings of the Maverick Storm 1 Hybrid:

  1. Go to the Setup main level.
  2. Select the Lamp Settings option.

Lamp On/Off
To turn the lamp on or off:

  1. Access the Lamp Settings.
  2. Select the On/Off option.
  3. Select from ON or OFF.

Lamp State at Power On
To select whether the lamp will tum on when the product powers on:

  1. Access the Lamp Settings.
  2. Select the State/Power on option.
  3. Select from ON (lamp will turn on when the product powers on), or OFF (lamp must be turned on manually).

Off Via DMX
To enable the ability to turn the lamp off with a DMX controller:

  1. Access the Lamp Settings.
  2. Select the Off Via Dmx option.
  3. Select from NO (DMX may not turn lamp off), or YES (DMX may turn lamp off).

On If DMX On
To set the lamp to tum on when a DMX signal is detected:

  1. Access the Lamp Settings.
  2. Select the On If Dmx On option.
  3. Select from NO (detecting a DMX signal will not turn on the lamp), or YES (detecting a DMX signal will turn on the lamp).

Off If DMX Off
To set the lamp to turn off when a DMX signal is not detected:

  1. Access the Lamp Settings.
  2. Select the Off If Dmx Off option.
  3. Select from NO (detecting no DMX signal will not turn off the lamp), or YES (detecting no DMX signal will turn off the lamp).

On If DMX On
To set the lamp to tum on when a DMX signal is detected:

  1. Access the Lamp Settings.
  2.  Select the On If Dmx On option.
  3. Select from NO (detecting a DMX signal will not turn on the lamp), or YES (detecting a DMX signal will turn on the lamp).

Off If DMX Off
To set the lamp to turn off when a DMX signal is not detected:

  1. Access the Lamp Settings.
  2. Select the Off If Dmx Off option.
  3. Select from NO (detecting no DMX signal will not turn off the lamp), or YES (detecting no DMX signal will turn off the lamp).

Ignition Delay
To set the time in seconds between the product powering on and the lamp turning on (when State/Power On is set to ON):

  1. Access the Lamp Settings.
  2. Select the Ignition Delay option.
  3. Set the delay time from 010-255 (seconds).

Low Power Delay
To set the time in seconds before the lamp enters low power mode with the shutter closed:

  1. Access the Lamp Settings.
  2. Select the Low Power Delay option.
  3. Set the delay time from 000-255 (seconds).

Reset Lamp On Time
To reset the Lamp On Time counter (see the System Information):

  1. Access the Lamp Settings.
  2. Select the Reset Lamp Time option.
  3. Select from NO (will not reset counter), or RESET (resets counter).

Maintenance Timer Interval
To set the interval of the maintenance timer (how long before the product signals it needs maintenance):

  1. Go to the Setup main level.
  2. Select the Maintenance Timer option.
  3. Select the Interval option.
  4. Set the interval time from 010-250 (hours).

Reset Maintenance Timer
To reset the maintenance timer:

  1. Go to the Setup main level.
  2. Select the Maintenance Timer option.
  3. Select the Remain Time option. The time remaining will display (it is also visible in the System Information).
  4. Select from NO (will not reset the timer), or RESET (will reset the timer).

Preset Selection
To select a preset configuration of menu options:

  1. Go to the Settings main level.
  2. Select the Preset Select option.
  3. Select from PRESET A (default), PRESET B, or PRESET C.
    •  Changes to settings automatically save to the currently selected Preset.
    •  If no Preset has been selected, changes to settings save to PRESET A.
    •  After selecting a Preset, the product will restart.

Preset Synchronization
To transfer saved Presets from one Maverick Storm 1 Hybrid to another:

  1. Connect the Maverick Storm 1 Hybrid products to receive the Presets by NoOOAWGN a DMX daisy chain.
  2. Make the Maverick Storm 1 Hybrid with the Presets to transfer the first in the DMX daisy chain.
  3. Power on all of the products.
  4. Set all of the products to a Control Mode other than WDMX. (DMX, ArtNet, or sACN)
  5. On the Maverick Storm 1 Hybrid with the Presets, go to the Settings main level.
  6. Select the Preset Sync option.
  7. Select NO (to cancel) or YES (to transfer the Presets to the connected products).
    • **** All menu configurations are transferred except for the IP address.
    • ONLY connect Maverick Storm 1 Hybrid products for this function!

USB Update
To enable or disable software update using USB:

  1. Go to the Settings main level.
  2. Select the USB Update option.
  3. Select NO (disables software update through USB) or YES (enables software update through USB).
    See the USB Software Update section for the detailed instructions on how to update the Maverick Storm 1 Hybrid software using a USB C connection.

Minimum Zoom Focus
To enable or disable the Min Zoom Focus function:

  1. Go to the Settings main level.
  2. Select the Min Zoom Focus option.
  3. Select NO (manual independent zoom control) or YES (focus adjusts depending on zoom setting).

Reset Function
To reset specific functions or the entire product:

  1. Go to the Settings main level.
  2. Select the Reset Function option.
  3. Select the functions to reset, from Pan/Tilt, Shutter/Prism, Color/CMY, Gobo/Animation, Zoom/ Focus/Frost, or All.
  4. Select NO (to cancel) or YES (to reset the selected functions).

Factory Reset
To reset the product to factory settings:

  1. Go to the Settings main level.
  2. Select the Factory Reset option.
  3. Select NO (to cancel) or YES (to reset the product configuration).

Test Mode
Auto Test
To have the Maverick Storm 1 Hybrid automatically test all functions one after the other:

  1. Go to the Test main level.
  2. Select the Auto Test option.

Manual Test
To manually test an individual function of the Maverick Storm 1 Hybrid:

  1. Go to the Test main level.
  2. Select the Manual Test option.
  3. Select a function to test, from Pan, Pan Fine, Tilt, Tilt Fine, P/T Speed, Dimmer, Dimmer Fine, Shutter, Cyan, Magenta, Yellow, Color, Gobo2, Gobo, Gobo Rotate, Gobo Rotate Fine, Animation, Prism1, Prism1 Rotate, Prism2, Prism2 Rotate, Frost1, Beam Diffraction, Focus, Focus Fine, Focus Auto, Zoom, Zoom Fine, or Special Function.
  4. Increase or decrease the value of the selected function from 0-255 to test it.

System Information
The information section of the menu displays statistics and the current status of the product’s various functions. To view this information:

  1. Go to the Information main level.
  2. Select from the Fixture Information, Fan Information, Error Information, or Channel Information options.
  3. Use and <DOWN?> to view all information.

Offset Mode (Zero Adjust)
The Offset mode provides fine adjustments for the home position of every moving part in the optical path as well as the pan and tilt movements. To adjust these options and prevent borders showing or reduction of the Ilght output:

  1. From the main level screen, press and hold until the passcode screen appears.
  2. Enter the passcode: 0920 and press .
  3. Select the “zero” position to adjust, from PAN, TILT, SHUT1, SHUT2, COLOR, GOBO2, GOBO, GOBO ROTATE, FOCUS GOBO, FOCUS GOBO2, ZOOM, PRISM1, PRISM1 ROT, PRISM2, PRISM2 ROT, FROST1, BEAM DIFFRACTION, CYAN, MAGENTA, YELLOW, ANIMATION, MAC4, MAC5, MAC6, RDM4, RDMS5, or RDM6.
  4. Adjust the “zero” position for the selected function from 000-255.

Web Server
The Maverick Storm 1 Hybrid Web Server can be accessed by any computer on the same network as the product. It allows network access to system information, settings such as control setup, manual testing of all functions, firmware updates, and the ability to change the Web Server password.

  1. Connect the product to power, and set the Control Mode to Art Net and the Implode to Static.
  2. Connect the product to a Windows computer with a network cable.
  3. On the computer, set the first value of the IP address of the new network to match the first value of the IP address of the product. The IP address of the product is displayed on the Home Screen.
  4. Enter the IP address of the product into the URL bar of a web browser on the computer.
  5. Enter both the User Name and Password as admin to log in.

Information
The Information page on the Web Server displays the current settings and the system information of the Maverick Storm 1 Hybrid.
Setup
The Setup page on the Web Server provides options for control, similar to the Setup menu on the product. Click Save Settings to send the new configuration to the product.
Manual Test
The Manual Test page on the Web Server allows all output functions of the product to be controlled through the browser. To set all functions back to default, click Reset.
Firmware Update
The Upgrade page on the Web Server allows the product to be updated with the latest firmware. Go to https://www.chauvetprofessional.com to download firmware updates.
Security
The Security page on the Web Server gives the option to change the password to the connected product’s web server. Enter the old password (admin, by default) and the new password twice, then click Save Settings to change the password.

Maintenance

Product Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and/or mechanical wear. To maintain optimum performance and minimize wear, clean each lighting product at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:

  1. Unplug the product from power.
  2. Wait until the product is at room temperature.
  3. Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the extremal No A N surface/vents.
  4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
  5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning tissue.
  6. Softly drag any dirt or grime to the outside of the transparent surface.
  7. Gently polish the transparent surfaces until they are free of haze and lint.

Always dry the transparent surfaces carefully after cleaning them.
Do not spin the cooling fans with compressed air. Damage may result.
Torque Measurements
To maintain the IP rating when reassembling the product, use the given torque measurements for each of the following screws and bolts:

  • Screws inside feet: 15.3 Kgf.cm, 13.3 Igb.in
  • Base screws around outside (not the feet): 16.3 Kgf.cm, 14.1 Igb.in
  • Base screws in middle: 35.7 Kgf.cm, 30.9 Igb.in
  • Omega bracket holder: 12.2 Kgf.cm, 10.6 Igb.in
  • Frontend rear base cover: 25.5 Kgf.cm, 22.1 Igb.in
  • Screws around power and data ports: 3.5 Kgf.cm, 3 Igb.in
  • Fuse: 7.1 Kgf.cm, 6.1 Igb.in
  • Center of yoke plate: 25.5 Kgf.cm, 22.1 Igb.in
  • Allen Key screws next to front lens: 25.5 Kgf.cm, 22.1 Igb.in
  • Allen Key screws holding in front lens cover: 12.2 Kgf.cm, 10.6 Igb.in
  • Allen Key screws next to heat pipes on the back: 25.5 Kgf.cm, 22.1 Igb.in
  • Allen Key screws head and arm covers: 25.5 Kgf.cm, 22.1 Igb.in

Vacuum Test Measurements
To ensure that the product has been reassembled correctly, use the IP Tester from Chauvet Professional to check the following data has the given measurements for the given method:

  • Method: Positive
  • Test Pressure (kPa):2.18
  • Test Duration (seconds): 60
  • PASS State leak pressure (kPa): <0.02

Technical Specifications

Dimensions and Weight

Length Width Height Weight
15.27 in (388 mm) 10.78 in (274 mm) 29.72 in (755 mm) 64.4 1b (29.2 kg)

Note: Dimensions in inches are rounded.
Power

Power Supply Type Range Voltage Selection
Switching (internal) 100 to 240 VAC, 50/60 Hz Auto-ranging
Parameter 100V, 60 Hz 120V, 60 Hz
Hz** 240V, 50 Hz
--- --- ---
Consumption 680 W 660 W
Operating Current 6.800 A 5540 A
Fuse/Breaker ~F15A,250V  F15A, 250V
Power /O U.S.Worldwide UK/Europe
--- --- ---
Power Input Connector Sermonic Power on A Sermonic Power on A
Power Cable plug Edison Local plug

Light Source

Type Power Lifespan
OSRAM SIRIUS HRI lamp 420 W 2,500 hours

Photometrics

Mode| Beam Angle| Field Angle| Cutoff Angle| Zoom Range
---|---|---|---|---
Spot (Gobo 1)| 1.3°t017.7°| 2.2°t031.9°| 2.6°t0 40.8°| 1.3° 10 40.8°
Beam (Gobo 2)| 0.8° to 7.4°| 1.5°t0 19.9°| 1.9° to 25.6°| 0.8° to 25.6°
Wash (no gobo)| 3.6°to 16.6°| 6.7° to 30.1°| 9.2°to 32.2°| 3.6°to 32.2°
Illuminance (Spot Mode)| llluminance (Beam Mode)| llluminance (Wash Mode)
---|---|---
1,075,418 lux @ 5 m (2.2° field)| 226,074 lux @ 15 m (1.5° field)| 71,522 lux @ 5 m (6.7° field)
5,422 lux @ 15 m (31.9° field)| 2,144 lux @ 15 m (19.9° field)| 3,005 lux @ 5 m (30.1° field)

Thermal

Maximum External Temperature Cooling System
113 °F (45 °C) Fan-assisted Convection

Control

DMX I/O Connector Ethernet I/O Connector Channel Range
5-pin IP rated XLR Neutrik IP rated RJ45 24 or 29

Ordering

Product Name Item Name Item Code UPC Number
Maverick Storm 1 Hybrid MAVERICKSTORM1HYBRID 8012056 7.81E+11

CHAUVET PROFESSIONAL Maverick Storm 1 Hybrid Spot Beam Wash -
icon1

Contact Us

General Information Technical Support

Chauvet World Headquarters
Address: 3360 Davie Rd.
Davie, FL 33314
Voice: 954-577-4455
Fax: 954-929-5560
Toll Free: 800-762-1084| Voice: 844-393-7575
Fax: 954-756-8015
Email: chauvetcs@chauvetlighting.com
Website: www.chauvetprofessional.com
Chauvet U.K.
Address: Pod 1 EVO Park
Little Oak Drive, Sherwood Park
Nottinghamshire, NG15 OEB UK
Voice: +44 (0) 1773 511115
Fax: +44 (0) 1773 511110| Email: UKtech@chauvetlighting.eu
Website: www.chauvetprofessional.eu
Chauvet Benelux
Address: Stokstraat 18
9770 Kruishoutem
Belgium
Voice: +32 9 388 93 97| Email: BNLtech@chauvetlighting.eu
Website: www.chauvetprofessional.eu
Chauvet France
Address: 3, Rue Ampére
91380 Chilly-Mazarin
France
Voice: +33 178 85 33 59| Email: ERtech@chauvetlighting.fr
Website: www.chauvetprofessional.eu
Chauvet Germany
Address: Bruno-Birgel-Str. 112
Bremen Germany
Voice: +49 421 62 60 20| Email: DEtech@chauvetlighting.de
Website: www.chauvetprofessional.eu
Chauvet Mexico
Address: Av. de las Partidas 34 – 3B
(Entrance by Calle 2)
Zona Industrial Lerma
Lerma, Edo. de México, CP 52000
Voice: +52 728-690-2010| Email: servicio@chauvet.com.mx
Website: www.chauvetprofessional.mx

Warranty & Returns

For warranty terms and conditions and return information, please visit our website.
For customers in the United States and Mexico: www.chauvetlighting.com /warranty-registration.
For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg,
France, and Germany: www.chauvetlighting.eu/warranty- registration.

Maverick Storm 1 Hybrid User Manual Rev. 3

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Chauvet Professional User Manuals

Related Manuals