delta cycle RS6002 Two Bike Gravity Stand Instruction Manual
- June 13, 2024
- delta cycle
Table of Contents
delta cycle RS6002 Two Bike Gravity Stand
Product Information
The Two Bike Gravity Stand is a bicycle storage rack designed to hold two bikes securely. It features a sturdy construction and has a maximum weight capacity of 100 lbs (45.4 kgs) for HDRS6002 model and 80 lbs (36 kgs) for RS6002 model. The maximum load per hook is 25 lbs (11.4 kgs), and the maximum weight per bike is 50 lbs (22.7 kgs).
This gravity stand comes with various parts including:
- A x1 – H Piece
- B x2 – Straight poles A
- C x1 – U piece
- D x2 – Legs
- E x4 – Arms
- F x6 – Bolts
Assembly instructions for the Two Bike Gravity Stand can be found in the user manual with the code RS6002 for HDRS6002 model or HDRS6002 for RS6002 model. The assembly video is available for viewing at designbydelta.com/downloads.
A Phillips Head Screwdriver is required to assemble the rack.
Product Usage Instructions
- Before starting assembly, make sure not to exceed the maximum weight limits specified for the rack and individual components.
- Assemble the rack following the provided assembly instructions and use the assembly video as a visual guide if needed.
- Do not tighten the bolts until the rack is fully assembled and all tubes are properly aligned.
- Adjust the height of the arms before placing any weight on them.
- Tighten all bolts securely before using the rack to ensure stability.
- Spread the legs of the rack apart to their maximum width before tightening.
- For added safety and to prevent accidental toppling, attach the wall stabilizing strap provided. Secure one end of the strap to the rack using the provided bolt, and secure the other end to the wall using an appropriate screw based on the wall construction. If unsure, consult a hardware merchant for the correct fixing method.
If you have any questions or need immediate assistance, please contact Delta Cycle Corporation’s customer service at 800-474-6615 or email service@designbydelta.com.
Parts
- A. x1 — H Piece
- B. x2 — Straight poles
- C. x1 — U piece
- D. x2 — Legs
- E. x4 — Arms
- F. x6 — Bolts
Tool Required
- Phillips Head
- Screwdriver
WARNING
- DO NOT EXCEED MAXIMUM TOTAL WEIGHT LIMIT OF 100 LBS (45.4 Kgs) – HDRS6002 / 80 LBS (36 Kgs) – RS6002
- MAX LOAD PER HOOK: 25 LBS (11.4 kgs) / MAX WEIGHT PER BIKE: 50LBS (22.7 kgs)
Assembly
Do not tighten bolts until rack is fully assembled and tubes are properly aligned.
Tighten all bolts before using.
Spread legs apart to max width before tightening
Adjust height of arms before they bear any weight.
Assembly video
Visit designbydelta.com/downloads.
IMPORTANT/SAFETY
In order to avoid accidental toppling of the rack, a wall stabilizing strap is supplied. This should be attached to the rack at one end with the bolt provided. The other end of the strap should be secured to the wall using a screw that is suitable for the type of wall construction. If in doubt, consult your hardware merchant for the correct method of fixing based on the wall construction.
Service
Please do not return to store; for immediate response email service@designbydelta.com.
Delta Cycle Corporation
36 York Avenue, Randolph, MA 02368 USA
800-474-6615 /
www.designbydelta.com.