zoOZ ZST39 LR 800LR Z-wave Stick User Manual
- June 13, 2024
- ZOOZ
Table of Contents
zoOZ ZST39 LR 800LR Z-wave Stick
Product Information
The 800LR Z-Wave Stick ZST39 LR is a USB controller that allows for fast, low- power direct communication in a Z-Wave network. It features the latest 800 Series Long Range Z-Wave technology,providing extended range of up to a mile in open space. The stick is equipped with the latest S2 security protocol for a truly private network. It works out of the box on Windows, Linux, and MAC OS without the need for any drivers. The stick also has an LED indicator for troubleshooting.
Specifications:
- Z-Wave Plus Static USB Controller
- Latest S2 security protocol
- 800 Series Long Range Z-Wave
- Extended range up to a mile in open space
- LED indicator for troubleshooting
- No drivers needed: works out of the box on Windows, Linux, and MAC OS
Warnings:
- This product should be installed indoors upon completion of any building renovations.
- Do not install the S2 Stick in a place with direct sun exposure, high temperature, or humidity.
- Keep away from chemicals, water, and dust.
- Ensure the device is never close to any heat source or open flame to prevent fire.
- Ensure the device is connected to an electric power source that does not exceed the maximum load power.
- No part of the device may be replaced or repaired by the user.
Compatibility:
This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network. This product features the latest Security 2 (S2) framework to remove smart home network hacking risks. It is equipped with a unique authentication code for trusted wireless communication.
Product Usage Instructions
Set-Up
Windows Set-Up:
For Windows 2000, XP, Vista, 7, and 8 (32 / 64 bit), the device will display
in Device Manager under Ports. To access it, use the Windows CreateFile API
using “//./COMxxx” where xxx stands for the COM port number assigned by
Windows. The ZWave SDK includes the UZB.INF and UZB.CAT files which use the
standard usbser.sys or usbser64.sys Windows driver.
Linux Set-Up:
In Linux, the device will display as /dev/ttyUSB0. You can discover it by
using the command “dmesg | grep tty”.
MAC OS Set-Up:
In MAC OS, the device will display as /dev/cu.usbmodem under Apple: System
preferences: Network.
SerialAPI Mode:
Once the S2 stick is plugged into the USB port of the host computer, it
automatically enrolls in the SerialAPI mode. It remains active (awake), always
listening for commands sent from the host software and relaying them to the
Z-Wave devices in the network. It acts as a Z-Wave signal adapter for your
smart home system, translating any Z-Wave reports and notifications sent by
devices in your network to your smart home interface.
Z-Wave Stick as Secondary Controller:
You can use the S2 stick as a secondary controller with your existing
Z-Wave system if it accepts additional controllers. To enroll the S2 stick in
your current system, send the inclusion command and put the S2 stick into
learning mode using the SerialAPI mode.
Factory Reset:
The 800 Series Stick can only be reset by the host software while it’s in
SerialAPI mode. The device is reset once an appropriate command from the host
software is sent to reset the Z-Wave network. There is no way to manually
reset the S2 stick if it’s not controlled by host software.
Product Registration:
Scan the QR code or visit
www.getzooz.com/register to register your
product for extended warranty, priority customer service, and more perks.
FEATURES
Z-Wave Plus Static USB Controller
- Latest S2 security protocol for a truly private network
- 800 Series Long Range Z-Wave for fast,low-power direct communication
- Extended range up to a mile in open space when using Long Range
- LED indicator for troubleshooting
- No drivers needed: works out of the box on Windows, Linux, and MAC OS
SPECIFICATIONS
- Model Number: ZST39 LR
- Z-Wave Frequency: 908.42 MHz
- Power: 4.75-5.25 VDC
- SDK: 7.18.01
- Operating Temperature: 14-104° F
- Operating Humidity: Up to 85%
- Installation and Use: Indoor only
- Dimensions: 2″ x 0.8″ x 0.3″
SET-UP
- Use this S2 800 Series Z-Wave USB Stick as a Z-Wave radio for your DIY smart home system. Simply connect it to a USB port on your PC, laptop, or Raspberry Pi and match it with home automation software (host software) of your choice to enjoy a fully secure, private Z-Wave Plus mesh network.
- If the software supports Z-Wave Long
- Range, enable direct communication between your devices and the controller for supreme range up to 1 mile and a larger network size up to 4000 nodes.
Questions? ask@getzooz.com
WINDOWS SET-UP
Windows 2000, XP, Vista, 7, 8 (32 / 64 bit)
The device will display in Device Manager under Ports. You can access it
through the Windows CreateFile API using “//.//COMXXX” where xxx stands for
the COM port number assigned by Windows.
UZB.INF and UZB.CAT are listed in the Z-Wave SDK which uses the standard
usbser.sys or usbser64.sys Windows driver.
LINUX SET-UP
Linux
The device will display as “/dev/ttyUSBO”, you can discover it with the “dmesg
| grep tty” command.
MAC OS SET-UP MAC OS
The device will display as”dev/cu.usbmodem” under Apple: System preferences:
Network.
SerialAPI Mode:
Once the S2 stick is plugged into the USB port of the host computer, it automatically enrolls in the SerialAPI mode and remains active (awake), always listening for commands sent from the host soft-ware and relaying them to the Z-Wave devices in the network. It acts as a Z-Wave signal adapter for your smart home system,translating any Z-Wave reports and notifications sent by devices in your network to your smart home interface.
Scan to register your product for extended warranty, priority customer service, and more perks.
Z-WAVE STICK AS SECONDARY CONTROLLER
You can use the S2 stick as a secondary controller with your existing Z-Wave
system if it accepts additional con-trollers. To enroll the S2 stick in your
current system, send the inclusion command and put the S2 stick into learning
mode, using the SerialAPI mode.
FACTORY RESET
The 800 Series Stick can only be reset by the host software while it’s in
SerialAPI mode.
The device is reset once an appropriate command from the host software is sent
to reset the Z-Wave network.
There is no way to manually reset the S2 stick if it’s not controlled by host
software.
WARNING
- This product should be installed indoors upon completion of any building renovations.
- Do not install the S2 Stick in a place with direct sun exposure, high temperature, or humidity.
- Keep away from chemicals, water, and dust.
- Ensure the device is never close to any heat source or open flame to prevent fire.
- Ensure the device is connected to an electric power source that does not exceed the maximum load power.
- No part of the device may be replaced or repaired by the user.
This product can be included and operated in any Z-Wave network with other
Z-Wave certified devices from other manufacturers and /or other applications.
All non-battery operated nodes within the network will act as repeaters
regardless of vendor to increase reliability of the network.
This product features the latest Security 2 (S2) framework to remove smart
home network hacking risks. This de-vice is equipped with a unique
authentication code for trusted wireless communication.
WARRANTY
This product is covered under a standard 12-month warranty and an extended
5-year limited warranty once registered. To read the full warranty policy or
file a warranty claim,please go to:
www.getzooz.com/warranty
FCC NOTE
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY
UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID
THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. STORE INDOORS WHEN NOT IN USE.
SUITABLE FOR DRY LOCATIONS ONLY. DO NOT IMMERSE IN WATER. NOT FOR USE WHERE
DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used according to instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in any given installation.
If this equipment causes harmful interference to radio or television reception, the user may try to correct the interference by taking one or more of the following measures.
- Reorient or relocate receiving antenna
- Increase the separation between equipment and receiver
- Connect equipment into a separate outlet or circuit from receiver
- Consult the dealer or an experienced radio/TV technician for additional assistance
All brand names displayed are trademarks of their respective holders.
© Zooz 2022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>