zoOZ ZAC36 Back-Up Battery For the Titan Water Valve Actuator User Guide
- October 30, 2023
- ZOOZ
Table of Contents
zoOZ ZAC36 Back-Up Battery For the Titan Water Valve Actuator
Product Information
The Zooz Titan Backup Battery is designed to provide backup power to your Zooz Titan actuator in case of a power outage. The battery has a 100% LED indicator guide that shows the battery charging status and two beeps when the power is restored, and three beeps when the power is lost. The battery is waterproof and comes with a waterproof cap to protect it from water damage.
Usage Instructions
Step 1: Connecting the Battery to the Power Supply
- Plug in the Zooz Titan Backup Battery to the Titan power supply.
- Screw on the waterproof cap on the battery.
- Connect the power cord from the Zooz Titan actuator to the power supply.
Step 2: Mounting the Titan Actuator and Powering it up
- Follow the installation instructions for the Zooz Titan actuator to mount it securely.
- Once the Titan actuator is installed on the valve, plug in the power supply to a receptacle.
- If your Titan device is already added to the hub, you need to exclude and re-include it after adding the battery pack.
- You can scan the QR code for a link to detailed installation instructions.
Note: The LED indicator on the battery will show solid blue when the
battery is fully charged, slow blink when it is charging, and flash when it is
discharging.
By following these usage instructions, you can ensure that your Zooz Titan
actuator remains powered even during a power outage, thanks to the backup
power provided by the Zooz Titan Backup Battery.
Plug in to the Titan power supply and screw on the waterproof cap
Scan the QR code for a link to detailed installation instructions.
IMPORTANT: If your Titan device is already added to the hub, you need to exclude and re-include it after adding the battery pack!
- Two beeps: power restored
- Three beeps: power lost
FOR THE ZOOZ TITAN BACKUP BATTERY
www.support.getzooz.com