SUPERSONIC IQ-8310DJBT Bluetooth Speaker User Manual

3 x10″ SPEAKER
TRUE WIRELESS TECHNOLOGY 1Q-8310DJBT
MADEINCHINA

THANK YOU FOR PURCHASING OUR SPEAKER. PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATING.

IMPORTANT SAFETY MEASURES

Before using this machine, please read all the safety and operating instructions. Please adhere to all the instructions herein, and save this information in a safe place for future use.

1. Please ensure the power cord for this unit is out of the path of foot traffic. Do not place heavy objects on the power cord as it will cause damage to the cord. Always firmly grasp the plug and pull the plug from the power supply, never yank the cable in order to pull out the plug. Avoid the use of an extension cable.
2. Ventilation: This unit should be placed in a well ventilated space where it has no less than 10cm ventilation space on either side of it. Do not cover the unit with a cloth or blanket. Do not putit on a bed, sofa, or carpet as this will stifle the ventilation of the unit.
3. Casing Dismantling: DO NOT dismantle the casing . There are no usable parts inside the unit. Make use of a service center in order to have your unit repaired.
4. Should the unit emit any smell or smoke, immediately turn off the power supply. Take the unit to the service center from which you bought it for repairs.

WARRANTY

Supersonic Inc. (“Supersonic”) warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use, for ninety (90) DAY S from the date of original purchase. Proof of purchase (receipt) required. Please visit https://www.supersonicinc.com/pages/warranty for additional information.

FEATURES

• BT Function &TWS Function
• Plays Mp3 files stored in SD card/USB drive/external audio device
• FM radio
• Microphone input
• Aux input
• Remote control
• Built-in rechargeable battery

CONNECTING

1. This set applies to AC 110V-240V, 50/60Hz
2. AC power: battery can be charged when connected to AC power. Red light on battery is charging, it will change to green once battery complete charge.
3. Internal battery will be charged even device switch off when plugged in to AC power
4. Adjust function keys to your personal audio preference.

BATTERY & CHARGING

1. The units takes approximately 8 hours to fully charge. It will automatically begin charging once the power cord is connected.
2. If the battery power is low may caused sound distortion or stop play, pls charging the battery ontime.
3. To maximize the battery’s lifespan, please charging the battery immediately. When the unit is not used for prolonged periods of time,the battery will gradually lose its power. It is recommended to fully charge the battery at least every 30days.
4.  To saving battery, please power off once stop using.

LED LIGHT

1. When the power turn onled light, it will be on the auto play status.
2. Press the LED LIGHT button to select the modes, there are different modes can be select. After all the modes have been pressed, the screen will be black and back to the auto play status after the Led light open again.
3. Turn off the led light switch, the led light will be close.

Change MODE to FM
FM Radio Function
– Press”Mode” on front panel to switch to FM Mode. Radio will start automatically.
– Press “PLAY/PAUSE” to enter into automatic FM channel searching.
– Press “NEXT” button to go to next song.
– Press “PREV” button to go to previous song.
Use SD -USB – AUX – play from media devices
Micro SD Function
– Insert a micro SD card on card slot
– Press “Mode” on the front panel to switch to “CARD” Mode, SD card mode will start automatically.
– Press “PLAY/PAUSE” to continue play/pause music.
– Press “NEXT” button to go to next song.
– Press “PREV” button to go to previous song.
– The Max size for micro SD takes 256G.
Micro USB Function
– Inserta USB on the slot
– Press “Mode” on the front panel to switch to “USB” Mode, USB mode will start automatically.
– Press “PLAY/PAUSE” to continue play/pause music.
– Press “NEXT” button to go to next song.
– Press “PREV” button to go to previous song.
-The version of the USB flash drive work with 2.0.
– The Max size for USB takes 256G.
Using AUX(LINE IN 3.5mm)
– Press “Mode” button change to LINE mode on front panel
– Disconnect USB/SD card while using Aux.
Use Microphone
Wireless Microphone
– Turn Wireless Microphone switch “ON”
– Adjust Microphone volume on control panel “MIC VOLUME”
– Adjust Microphone effects with knobs “MIC TREBLE/MIC BASS/MIC DELAY/MIC ECHO”
-Use AA Battery on the wireless microphone
Wired Microphone
– Insert wired microphone into the MIC jack
– Adjust Microphone volume on control panel
“ MIC VOLUME”
– Adjust Microphone effects with knobs “MIC TREBLE/MIC BASS/MIC DELAY/MIC ECHO”Remote IR distance: 8 meter

BLUETOOTH INSTRUCTION

Change the mode into”BLUE”, the bluetooth sign light twinkles, and speaker will give an alarm. Ensure you enable the Bluetooth function on your Bluetooth device. Search for Bluetooth connection until you find device model and pair.

TWS CONNECTION

STEP 1
Push the Mode Button on both speakers until speakers are in Bluetooth Mode. Screen will display the word “BLUE”.
STEP 2
When both speakers are in Bluetooth mode, push and hold the TWS button for 3 seconds. You will hear a beep & screen display “bt/btst”. Next time you put both speakers in Bluetooth mode at the same time, speakers will connect automatically.
STEP 3
On your device, turn your Bluetooth settings “ON”, you will then select the unit and pair. Enjoy TWS (True Wireless Stereo) sound from your phone via Bluetooth!

REMOTE CONTROL

PANEL FUNCTION

1. POWER ON/OFF SWITCH,RESET

2. MIC. MICROPHONE INPUT JACK 1

3.  GT.VOL+/- GUITAR VOICE ADJUST

4. MIC. VOL MICROPHONE VOLUME ADJUST

5. MODE: MODE SELECT

6.  REPEAT

7. REC: RECORDING; INSERT USB/SD CARD PRESS THIS
   BUTTON FOR RECORDING, PRESS AGAIN TO STOPAND
   PLAY RECORDING SOUND

8. LED MODE: LED MODE SELECT

9. PREV: PREVIOUS SONG

10. SCAN/TWS: PLAY/PAUSE/TWS/FM STATION AUTOMATIC SEARCH

11. NEXT: NEXT SONG

12. VOLUME MASTER VOLUME ADJUST

13. X-BASS+/-: X-BASS ADJUST

14. USB USB INPUT
    TFTF CARD SLOT
    SD/MMC CARD SD/MMC CARD SLOT

15. DC 12VINPUT: DC 12V CHARGING INPUT

16. POWER INPUT

17. GT.IN GUITAR INPUT JACK

18. M.PRIMICROPHONE PRORITY ON/OFF SWITCH

19. M.HI/M.MID/M.LO MICROPHONE ADJUST

20. ECHO+/- ECHO ADJUST

21. DELAY+/- ADJUST THE TIME BETWEEN THE SOURCE AND SPEAKER

22. AUDIO INPUT

PACKAGE CONTAINS:

1. SPEAKET ……………………………………………1 pc
2. UserManual ……………………………………….. 1 pc
3. Remote Control………………………………….. 1 pc
4. Microphone………………………………………. 1 pc
5. AUX cable…………………………………………. 1 pc

FCC Warning

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.     

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>