legrand ATU PM7407 Green Up Steckdose UP Soliroc Instruction Manual
- June 13, 2024
- Legrand
Table of Contents
legrand ATU PM7407 Green Up Steckdose UP Soliroc
Product Overview
- To ensure the system functions properly, install the RCBO separately from the other devices on the panel.
- C16 RCD circuit breaker – 30 mA, 16 A – Type F (Hopi) – Ref. 4 107 53
- Minimum tightening: 0.8 Nm
- One socket only per dedicated line
- Una sola presa per
- Ensure that your electricity supply contract is compatible with recharging your electric vehicle.
- Always remove the plug from the socket before starting the vehicle.
- Use only the cables supplied with the vehicles on EV (electric vehicle) sockets.
- Do not use an extension or adapter.
- The EVSE box must be suspended.
- Use of a surge protector is recommended.
- non flouring
not provided
Safety instructions
This product should be installed in compliance with installation rules,
preferably by a qualified electrician. Incorrect installation and/or incorrect
use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account
of the product’s specific mounting location.
Do not open up, dismantle, alter or modify the device except where
specifically required to do so by the instructions. All Legrand products must
be opened and repaired exclusively by personnel trained and approved by
Legrand. Any unauthorized opening or repair completely cancels all liabilities
and the rights to replacement and guarantees. Use only Legrand brand
accessories.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>