Power Plus POWEB9050 Charger 18V Instruction Manual
- June 13, 2024
- POWER PLUS
Table of Contents
Power Plus POWEB9050 Charger 18V
Product Information
- Product Name: POWEB9050 CHARGER 18V
- Input Voltage: 220-240V~ 50Hz
- Output Voltage: 21V
- Output Current: 1.7A
- Charging Time for 18V (1.5Ah) Battery: 60 minutes
- Charging Time for 18V (3.0Ah) Battery: 120 minutes
- Fuse Type: T3.15A
- Manufacturer: Varo – Vic. Van Rompuy nv
- Manufacturer Address: Joseph Van Instraat 9 – 2500 Lier – Belgium
Product Usage Instructions
WARNING: Use only batteries recommended in the manual. Charging other types of batteries may cause damage and serious injury.
- Connect the charger to a power outlet with an input voltage of 220-240V~ and a frequency of 50Hz.
- Ensure that the charger is turned off before connecting the battery.
- Insert the compatible 18V battery into the charger.
- Make sure the battery is securely inserted into the charger.
- Turn on the charger.
- The charging process will begin, and the battery indicator lights may show the progress of charging.
- Wait for the specified charging time according to the capacity of your battery. For an 18V (1.5Ah) battery, wait for 60 minutes. For an 18V (3.0Ah) battery, wait for 120 minutes.
- Once the charging time is complete, the charger will automatically stop charging.
- Turn off the charger and disconnect it from the power outlet.
- Remove the fully charged battery from the charger.
USE ONLY BATTERIES RECOMMENDED IN THE MANUAL. CHARGING OTHER TYPES MAY CAUSE DAMAGE AND SERIOUS INJURY.
Varo – Vic. Van Rompuy nv
Joseph Van Instraat 9 – 2500 Lier – Belgium
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>