LLURIA BN4-8-23 Water Resistant Basic Flex LED Strip Owner’s Manual
- July 27, 2024
- LLURIA
Table of Contents
- LLURIA BN4-8-23 Water Resistant Basic Flex LED Strip
- 5 MacAdam steps
- Technical data
- Dimensions
- Circuit diagram
- Cable section
- Distance LED – Profile
- Assembly detail
- Life time
- Warnings
- Specifications:
- Product Usage Instructions:
- FAQ:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
LLURIA BN4-8-23 Water Resistant Basic Flex LED Strip
OWNER’S MANUAL
Water Resistant IP65
Basic New 4,8W/m
Flex LED strip ideal for signalling or decorative installations.
For indoor and outdoor use.
5 MacAdam steps
CDL
Technical data
| Power | 4,8W/m |
|---|---|
| Roll power 5m | 24W |
| IP | 65 |
| CRI | >90 |
| R9 | >25 |
| Voltage | 24V |
| LED type | 2835 |
| LEDs/m | 60 |
| Pitch | 16,7mm |
| Beam angle | 120º |
| Min. cutting lenght | 100mm |
| Roll length | 5m/30m |
| Life time | 50.000h |
| temperature | -20~50ºC |
| temperature | -40~80ºC |
| Warranty years | 4 |
| Regulable Dimmable | Sí Yes |
| Needs heatsink | No |
Dimensions
Circuit diagram
Respect the maximum lengths to avoid drops voltage and variations in light intensity.
Cable section
Distance LED – Profile
Assembly detail
Do not bend de LED strip to adapt them to sharp radius or angle, cut for the cut mark and weld a section of cable to make the turn.
Life time
The life time of our LEDs is 50.000h at an ambient temperature of 23ºC and
provided with a heat dissipation system.
Off cycles are recommended to extend the life of the LEDs.
Warnings
- To ensure the life of the LED, it is request to place on a surface that dissipates the heat they generate.
- Caution when handling cables to avoid damage to the welds.
- The voltage surges can cause damage.
- If diffuser is used with the dissipating profile, there may be variations in the color temperature.
Specifications:
-
Product Name: Water Resistant IP65 Basic New
4,8W/m BN4,8 LED Strip -
Reference: BN4,8-23, BN4,8-27, BN4,8-30,
BN4,8-40, BN4,8-60 -
CCT: 2300K, 2700K, 3000K, 4000K, 6000K
-
Lumens/m: 379, 385, 395, 400, 430
-
Lumens/W: 79, 80, 82, 83, 90
-
Power: 4.8W/m, 24W
-
Voltage: 24V
-
LED Type: 2835
-
LED Quantity: 60 LEDs per meter
-
Water Resistance: IP65
Product Usage Instructions:
Installation:
- Ensure the surface where the LED strip will be installed is clean and dry.
- Peel off the adhesive backing of the LED strip and carefully place it on the desired location.
- If needed, cut the strip at designated cut marks to fit the desired length.
- Connect the LED strip to a compatible power source following the manufacturer’s instructions.
Usage Tips:
-
Avoid bending or twisting the LED strip excessively to prevent damage to the LEDs.
-
Do not submerge the LED strip in water as it is water-resistant but not waterproof.
-
Avoid direct exposure to sunlight for prolonged periods to maintain LED strip longevity.
-
-
FAQ:
Q: Can I connect multiple strips together?
A: Yes, you can connect the LED strips in series following the specified guidelines in the manual.
Q: What should I do if the LED strip stops working?
A: Check the power source and connections first. If the issue persists, contact customer support for further assistance.