nVent CADDY CAT16HPTS Cat HP J-Hook Owner’s Manual

nVent CADDY CAT16HPTS Cat HP J-Hoo

Product Information

Product Usage Instructions

Please follow the instructions below for proper usage of the NVENT CADDY CAT HP J-HOOK WITH T-GRID CLIP, 1 DIA:

1. Ensure that you have the necessary tools and equipment for installation.
2. Refer to the nVent product instruction sheets and training materials available at www.nvent.com or from your nVent customer service representative for detailed installation guidelines.
3. Follow the instructions provided in the product manual to install the NVENT CADDY CAT HP J-HOOK WITH T-GRID CLIP, 1 DIA securely.
4. Make sure to comply with the specified cable capacity for different cable types:
   • Cat 5e: Up to 20 cables
   • Cat 6: Up to 15 cables
   • Cat 6A: Up to 10 cables
5. Do not exceed the specified static load of 60 lb.
6. Failure to properly follow nVent’s instructions and warnings may result in product malfunction, property damage, serious bodily injury, and voiding of the warranty.

If you have any further questions or concerns, please contact nVent customer support using the contact information provided:

For more information about nVent and their portfolio of brands,  please visit their website: www.nvent.com

Note: Specifications are subject to change without notice. nVent reserves the right to update the product specifications.

Disclaimer: All brand names mentioned belong to their respective owners.

CATALOG NUMBER

CAT16HPTS

CERTIFICATIONS

FEATURES

• ®o installation tools required for basic clip
• Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic
• Provides superior fill capacity and load rating over most other non-continuous cable support alternatives
• Rounded edges on J-Hooks provide proper bend radius support for high performance data cables
• Cost effective alternative to expensive cable tray
• Complies with EN 50174-2
• Meets ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569

PRODUCT ATTRIBUTES

• Material: Steel;Spring Steel
• Finish: nVent CADDY Armour;Pregalvanized
• Diameter: 1″
• Area: 1.07 in²
• Cable Capacity, Cat 5e: 20
• Cable Capacity, Cat 6: 15
• Cable Capacity, Cat 6A : 10
• A: 2 9/16″
• Static Load: 60 lb

ADDITIONAL PRODUCT DETAILS

Additional support wire required per NEC® 300.11.
Non-continuous supports may not exceed spacing of 5′ (1.5 m) per TIA 569-C.9.7 and EN 50174-2. Cable capacity is calculated based on a 70% fill rate.

DIAGRAMS

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

North America
+1.800.753.9221
Option 1 – Customer
Care Option 2 – Technical Support

Europe Netherlands:
+31 800-0200135 France:
+33 800 901 793

Europe Germany:
800 1890272 Other
Countries: +31 13 5835404

APAC
Shanghai:
+ 86 21 2412 1618/19 Sydney:
+61 2 9751 8500

nVent.com
© 2022 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.

References

• Building a more Sustainable and Electrified World | nVent
• Building a more Sustainable and Electrified World | nVent

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>