PEREL LEDA401 Series LED Floodlight User Manual

PEREL LEDA401 Series LED Floodlight

Product Information

The LEDA401 Series is a floodlight designed for both commercial and residential use. It features a die-cast aluminium housing with tempered glass, giving it a durable and sturdy construction. The floodlight has an ultra-thin design and comes with an adjustable bracket for easy installation. It also includes a 50 cm unterminated cable for convenient wiring. With an IP65 rating, it is suitable for outdoor use and can withstand exposure to various weather conditions. The floodlight has an energy efficiency index (EEI) rating of A+, ensuring that it consumes less energy while providing bright illumination.

Product Usage Instructions

1. Ensure the device is kept away from extreme temperatures.
2. Keep the device away from children and unauthorized users.
3. To prevent the risk of electroshock, do not disassemble or open the housing yourself. Contact qualified personnel for repairs.
4. Before installation or maintenance activities, ensure the luminaire is electrically isolated from the mains.
5. Avoid crimping the power cord and protect it against damage. Ifthe power cord is damaged, it must be replaced by the manufacturer or qualified persons.
6. Do not attempt to disassemble or open the cover as there are no user-serviceable parts inside. Refer to an authorized dealer for service and spare parts.
7. Avoid looking directly at the operating lamp to prevent eye injury from possibly hazardous optical radiation.
8. Take caution as the device may heat up during use.
9. Maintain a minimum distance of 0.5 m between the device’s light output and any illuminated surface.
10. Do not use the luminaire if the protective glass is cracked orbroken. Disconnect it from the mains and have it repaired by a qualified technician.
11. Familiarize yourself with the functions of the device beforeusing it.
12. Modifying the device is forbidden for safety reasons. Any damage caused by user modifications will not be covered by the warranty.
13. Use the device only for its intended purpose. Using it in unauthorized ways may result in hazards such as short circuits, burns, electroshocks, lamp explosion, or crashes, and will void thewarranty.
14. Damage resulting from disregarding the guidelines in this manual is not covered by the warranty. The dealer will not be responsible for any defects or problems that arise.
15. If transporting the device, use the original packaging. Keep this manual for future reference.

Introduction

To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing Perel! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, don’t install or use it and contact your dealer.

Safety Instructions

cover. Touching live wires can cause life-threatening electroshocks. Do not disassemble or open the housing yourself. Have the device repaired by qualified personnel.
**| This luminaire does not have a built-in device to disconnect it from the electric mains. Make sure to electrically isolate the luminaire before installation or maintenance activities are performed.
**| Do not crimp the power cord and protect it against damage. Warning! If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid any hazard.
Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
A qualified technician shall install and service this device.
**| DO NOT disassemble or open the cover. There are no user- serviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.
**| Caution : possibly hazardous optical radiation emitted from this product. Do not look at operating lamp. Eye injury may result.
**| Caution : device heats up during use.
---|---
**| Respect a minimum distance of 0.5 m between the device’s

light output and any illuminated surface.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

| Keep this device away from extreme temperatures.
---|---
| Protect this device from shocks and abuse. Avoid brute force when operating the device.
| This device is not suitable for dimming.
| Do not use the luminaire with a cracked or broken protective glass. Disconnect immediately from the mains and have it repaired by a qualified technician.

• Familiarise yourself with the functions of the device before actually using it.
• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
• Use the original packaging if the device is to be transported.
• Keep this manual for future reference.

Features

• floodlight for commercial or residential use
• die-cast aluminium housing with tempered glass
• ultra-thin design
• with adjustable bracket
• with 50 cm unterminated cable
• suited for outdoor use (IP65)
• energy efficiency index (EEI): A+

Overview

Installation

Guidelines

• A qualified technician should install and service this device.
• The construction to which the device is attached should be able to support 4 times the weight of the device for one hour without deformation.
• Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified technician check the device once a year and once before you bring it into service.
• Overhead mounting requires extensive experience: calculating workload limits, determining the installation material to be used… Have the material and the device itself checked regularly. Do not attempt to install the device yourself if you lack these qualifications as improper installation may result in serious injuries.
• This device is not suitable for dimming.

Distances

• Keep at least 50 cm distance at the top and 30 cm on either side.
• Respect a minimum distance of 0.5 m between the device’s light output and any illuminated surface.

Suitable Mounting Positions

Mounting the Lamp

1. This luminaire does not have a built-in device to disconnect it from the electric mains. Make sure to electrically isolate the luminaire before installation or maintenance activities are performed.

2. Use the mounting bracket [1] to determine the location of the mounting holes.

3. Drill the holes and secure the bracket using screws and wall plugs.

4. Connect the power cable [4] to a suitable junction box (not incl.). Make sure the connection is properly earthed. Make sure there is no strain on the cable; leave sufficient slack.
   Warning: if the power cable is damaged, it must be replaced by the manufacturer, his service agent, or a similar qualified person in order to avoid any hazard.

5. To point the lamp in the desired direction: loosen the hinges [2] using a hex key.

6. Tilt the lamp in the desired angle and tighten the hinges.

2D Light Distribution Curve

Cleaning and Maintenance

• All screws should be tight and free of corrosion.
• The housing, the visible parts, the mounting supports and the installation location (e.g. ceiling, suspension, trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in mounting supports, do not change the location of the connections…
• Mechanically moving parts must not show any signs of wear and tear.
• The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
• If the protective glass [3] is damaged, disconnect the lamp immediately from the mains. Have it repaired immediately by a qualified technician. Do not use the lamp with a cracked or broken protective glass.
• This luminaire does not have a built-in device to disconnect it from the electric mains. Make sure to electrically isolate the luminaire before installation or maintenance activities are performed.
• Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.

Technical Specifications

All models

electrical data

power LED module| 8 x SMD 1.21 W LED
total nominal power| 12 W
nominal voltage driver| 210–240 Vac 50/60 Hz
nominal voltage LED module| 31 V
power factor| 0.56
energy consumption| 12 kWh/1000h
cable| H05RN-F 3G1.0 – 50 cm
light technical data

beam angle| 105°
luminous flux| 655 lm
colour rendering index| 81
starting time| < 0.5 s
warm-up time (60 %)| < 1 s
lifespan

nominal life time| 36 000 h
number of switching cycles| 18 000
dimensions & weight
dimensions (W x H x D)| spot| 130 x 95 x 25 mm
incl. bracket| 152 x 130 x 25 mm
cable length| ± 50 cm
weight| 420 g

Individual models

model| body colour| light colour| colour temperature
---|---|---|---
LEDA401CW-B| matte black| ****

cold white

| ****

6500 K

LEDA401CW-SG| silver grey
LEDA401CW-W| white
LEDA401NW-B| matte black| ****

neutral white

| ****

4000 K

LEDA401NW-SG| silver grey
LEDA401NW-W| white
LEDA401WW-B| matte black| ****

warm white

| ****

3000 K

LEDA401WW-SG| silver grey
LEDA401WW-W| white

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.perel.eu. The information in this manual is subject to change without prior notice.

COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).

General Warranty Conditions Concerning Consumer Products (for EU):

• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
• Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.

You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

Not covered by warranty:

• all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
  • consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, nonrechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list);
  • flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
  • flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions;
  • damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
  • damage resulting from an inappropriate packing and shipping of the article;
  • all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
• Repairs occurring after warranty expiration are subject to shipping costs.
• The above conditions are without prejudice to all commercial warranties.

The above enumeration is subject to modification according to the article (see article’s manual).

Made in PRC
Imported for PEREL by Velleman nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.perel.eu

References

• Details – Own brands – Velleman – Wholesaler and developer of electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>