EMOS H4053 GoSmart Outdoor Battery Camera IP 200 SNAP User Guide

EMOS H4053 GoSmart Outdoor Battery Camera IP 200 SNAP

Package contents

• Camera unit
• Power adapter
• USB cable
• Magnetic mount
• Rotary mount
• Set of screws
• Manual

Technical specifications

• Power supply: DC 5 V/1 A
• Dimensions: 58 × 58 × 94 mm
• Net weight: 225 g
• Resolution: 1 920 × 1 080
• Sensor: 1/2.9‘‘ 2 Megapixel CMOS
• Battery capacity: 9 600 mAh
• PIR detection range: 9 m
• PIR angle: 120°
• Lens: 3.2 mm, F2.0
• Storage: SD card (max. 128 GB), Cloud storage
• Enclosure rating: IP65
• APP: EMOS GoSmart for Android and iOS
• Connection: 2.4 GHz WIFI (IEEE802.11b/g/n)
• Maximum number of users: 4

Description of the device: fig. 1

• A – Speaker
• B – PIR sensor
• C – Lens
• D – Status LED
• LED glowing red: network set incorrectly.
• LED flashing red: camera is preparing for connection to Wifi.
• LED flashing red rapidly: currently connecting to Wifi.
• LED glowing blue: camera working correctly.
• E – RESET button
• Pressing and holding RESET for 5 s resets the device to factory settings.
• F – Light sensor
• G – Micro USB port
• H – Charging indicator
• LED glowing red: battery charging.
• LED glowing blue: charging complete.
• I – Microphone
• J – SD card slot (max. 128 GB)

Installing the magnetic mount: fig. 2a

1. Place the mount on the chosen spot and affix it using screws.
2. Place the camera on the magnetic mount and adjust its direction as needed.

Installing the rotary mount: fig. 2b

1. Place the mount on the chosen spot and affix it using screws.
2. Place the camera on the rotary mount and adjust its direction as needed.
3. Once the camera is positioned, affix it using screws.

Installing the EMOS GoSmart app: fig. 3

]The app is available for Android and iOS on Google play and App Store. Download the application by scanning the corresponding QR code.

Router setting: fig. 4
The camera only supports 2.4 GHz Wifi (not 5 GHz).

EMOS GoSmart mobile app: Fig. 5a.
Open EMOS GoSmart and confirm the privacy policy by tapping agree.

• Fig. 5b
  Choose sign up.

• Fig. 5c
  Enter a valid e-mail address and choose a password. Confirm the privacy policy by tapping agree. Choose log in.

• Fig. 6a
  Choose add device.

• Fig. 6b
  Choose the corresponding product category.

• Fig. 6c
  Choose the correct type of product.

• Fig. 6d
  Connect the device to power.

• Fig. 6e
  Make sure the LED on the device is flashing. Confirm by tapping next.

• Fig. 6f
  Enter the name of the Wifi network and password. Confirm by tapping next.

• Fig. 6g
  A QR code will appear on the screen of your device. Place the QR code in front of the lens of the camera unit. Confirm that you have heard an audio signal for successful pairing.

• Fig. 6h
  The device will be detected automatically.

• Fig. 6i
  The device has been found. Confirm by tapping done.

• Connectivity : Wi-Fi 2.4 GHz IEEE 802.11b/g/n

• Frequency band : 2.400–2.4835 GHz

Hereby, EMOS spol. s r.o. declares that the radio equipment type H4053 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.emos.eu/download. Do not dispose with domestic waste. Use special collection points for sorted waste. Contact local authorities for information about collection points. If the electronic devices would be disposed on landfill, dangerous substances may reach groundwater and subsequently food chain, where it could affect human health.

References

• Ke stažení - EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod
• EMOS | Elektro eshop a velkoobchodEMOS | Elektro eshop a velkoobchod

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>