AcousticSheep SE8BM(US)-AMN SleepPhones Effortless V8 Sleep Headphones User Guide

AcousticSheep SE8BM(US)-AMN SleepPhones Effortless V8 Sleep Headphones User Guide

WEARING YOUR EFFORTLESS™ HEADPHONES

1. Holding the headphones, you’ll notice the flat speakers – one on each side – inside of the headband.
2. Place the headband on your head(with the label at the back of your head).
3. Once the headband is on, adjust the speakers so they are positioned directly over your ears. This will ensure great sound quality.

Please Note: The speakers move inside of the headband, independently of the headband

EFFORTLESS™ HEADPHONES OPERATIONS

Bluetooth® Module

Power On: Press and hold center button for 5 seconds.
Volume: Click the arrows to increase or decrease the volume.
Skip Track: Double click arrows to skip tracks.
Play/Pause: Click the center button once to play or pause.
Power Off: Press and hold the middle square button on the Bluetooth® module for 3 seconds until you hear “power off” through the speakers.

PAIRING YOUR EFFORTLESS™ HEADPHONES

1. Remove the Bluetooth® module from the hook and loop opening at the back of the headband.
2. Hold down the square button for 5 seconds until you hear “power on” through the speakers followed by “Bluetooth® pairing” and a fast blinking red light. It must be within 3 feet (1 meter) of your device.
3. On your device, make sure Bluetooth® is turned on. Look for “ACOUSTICSHEEP” and select to pair. Pairing may take up to 30 seconds. When paired, you will hear “Bluetooth® connected.”
   

EFFORTLESS™ CHARGING INSTRUCTIONS

1. Plug the wall adaptor into the wall outlet.
2. Plug the USB-A end of the charging cable into the wall adapter.

EFFORTLESS™ CHARGING INSTRUCTIONS CONT.

3. Plug the micro-USB end of the charging cable into the charging base.

4. Feel for the Bluetooth® module of your Effortless™ headphones and place it on the charging base so that the magnets match. There are two magnets that will hold it in place during charging.
   After three hours, the

5. Bluetooth® module will be fully charged.

Orange: Not charging, adjust headphone position to begin charging
Green: Charging

CARING FOR YOUR HEADPHONES

• When disconnecting the cord, grasp and pull the plug and not the cord.
• Do not leave components in a wet or dirty headband.
• Wash your headband regularly (remove all components before washing).
• Avoid fully discharging the battery.

WASHING INSTRUCTIONS

1. Open the hook and loop opening at the back of the headband to reveal the Bluetooth® module and speakers.
2. Gently remove the module and speaker by holding on to the speaker padding, not the cable.
3. Once all electronic components are removed, you may machine wash and dry the headband. Avoid bleach or fabric softener.
4. Reinsert one speaker at a time, about four inches from the hook and loop opening.
   • Right speaker has red stitching
   • Left speaker has green stitching
   • Softer gray side should face towards the ear
   • White side should face away from the ear
5. Reinsert the module.
6. Close the hook and loop opening.

TROUBLESHOOTING

Unable to Pair for the First Time? When you turn on the module, make sure to continue holding down the center button for a full 5 seconds until you hear “power on” followed by “Bluetooth® pairing.”
Unable to Pair?
If your Bluetooth® enabled device is unable to pair with the Bluetooth® module, you may need to reset the module and/or your device. The Bluetooth® module can only be reset when it is not paired with a device. To reset the Bluetooth® module, turn it on then hold both the “up” and “down” arrow buttons down for 7 seconds. Once the reset function is complete, there will be 2 long tones through the speakers, and it will power off. Turn it back on to re-enter pairing mode.
Unable to Find Device while Pairing?
If your AcousticSheep® module was previously paired with another device, it will automatically pair with that device if the device is within range. Make sure that the Bluetooth® on all other previously paired devices are turned off when you are pairing with a new device.

No Sound When Paired

• Slide the speakers inside the headband (gray side of speakers towards the ear) to position them over your ears.
• Check the volume on your Bluetooth® audio player and Bluetooth® module located inside the headband.
• Make sure the Bluetooth® module is charged.
• If your paired Bluetooth® device is separated from your headphones for more than 5 minutes, the headphones will automatically power off. Try powering them back on (not all apps or software support Bluetooth®).
• Turn off the module and restart the pairing process.

WARRANTY INFORMATION AND LEGAL DISCLOSURES

BATTERY

This AcousticSheep® product contains a rechargeable lithium ion battery. It should only be charged with the charging cable and wall adapter provided with this product. Lithium batteries last longer if they are charged after every use. They do not need (and prefer not)
to be fully discharged before recharging. AcousticSheep® provides a battery replacement and recycling service that you can access through our website. Please DO NOT attempt to open this product or replace the battery yourself. Opening the product voids the limited warranty.

WARNINGS
WARNING: SleepPhones® or RunPhones® may be a strangulation hazard. They should not be used by children, the elderly, or by anyone who may strangulate on the cord.
WARNING: Use of a headset that covers both ears will impair your ability to hear other sounds. Use of such a headset while operating a motor vehicle or riding a bicycle may create a serious hazard to you and/or others, and is illegal in most states and regions.

WARNING: Exposure to high volume sound levels may damage your hearing. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your headset or headphones with different music and different devices. If you experience hearing discomfort, you should stop listening to the device through your headset or headphones and have your hearing checked by your doctor.

To protect your hearing, hearing experts suggest that you:

• Set the volume control in a low position before putting your headset or headphones on your ears and use them at the lowest possible volume.

• Avoid turning up the volume to block out noisy surroundings. Whenever possible, use
  your headset or headphones in a quiet environment with low background noise.

• Limit the amount of time you use headsets or headphones at high volume levels.

• Turn the volume down if the sound from the headset or headphones prevents you from hearing people speaking near you.

If you live in North America and still can’t find the information you need, please call our customer service team for assistance before returning the products to your retailer under their return policy.

Tel: 877-838-4790 Email: service@acousticsheep.com If you live outside of North America, please visit our website www.SleepPhones.com or www.RunPhones.com to locate your country’s distributor.

Bluetooth® Wireless Headphones AcousticSheep LLC

FCC NOTICE TO USERS FCC ID: SRHZJRNFY15

Changes or modifications not expressly approved by AcousticSheep LLC could void the user’s (or your) authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

For the product FCC registration label, please see the Bluetooth® wireless module contained inside of the headband.

RF EXPOSURE
THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines.

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance

DECLARATION OF CONFORMITY

Acoustic Sheep LLC declares that this product is in compliance with:

• The essential requirements and other relevant provisions of Directive 1999/5/EC
• All other relevant EU Directives.

In compliance with WEEE Directive (2002/96/EC), please dispose of this product by taking it to your local collection point or recycling center for electronic devices.

These statements have not been evaluated by the Food and Drug Administration. This
product is not intended to diagnose, treat, cure, or prevent any disease.

• Limit the amount of time you use headsets or headphones at high volume levels.
• Turn the volume down if the sound from the headset or headphones prevents you from hearing people speaking near you.

LIMITED ONE-YEAR WARRANTY
Please refer to www.SleepPhones.com/warranty for full details regarding the AcousticSheep LLC Limited Warranty.

CUSTOMER SERVIC
The answers to most setup and performance questions can be found in the FAQs at www.SleepPhones.com/faqs or www.RunPhones.com/faqs.

Visit www.SleepPhones.com/instructions to read this User Guide as well as Warranty Information and Legal disclosures in additional languages.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., and any use of such marks by AcousticSheep LLC are under license. Other trademarks and trade names are those of their respective owners.

© 2022 AcousticSheep LLC. All rights reserved. SleepPhones®, RunPhones®, the SleepPhones® logo, the RunPhones® logo, and “pajamas for your ears” are trademarks or a registered trademark of AcousticSheep LLC. Unauthorized duplication is a violation of applicable law. US Patent No. 8,213,670 and 9,924,271. Other US and international patents pending.

Welcome to the AcousticSheep® Family!

This User Guide has helpful tips and info for using and enjoying your new AcousticSheep® SleepPhones® or RunPhones® Effortless™.

Still have questions? Contact our customer service team M-F from 8-5pm ET at 877-838-4790 or at service@acousticsheep.com.

Enjoy!

References

• RunPhones
• Frequently Asked Questions
• SleepPhones | SleepPhones® Comfortable Headband Headphones for Sleeping
• Frequently Asked Questions | SleepPhones® Comfortable Headband Headphones for Sleeping
• Instruction Manuals | SleepPhones® Comfortable Headband Headphones for Sleeping
• Warranty | SleepPhones® Comfortable Headband Headphones for Sleeping

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>