wiltec 60143-60146 US Mailbox Instruction Manual
- June 13, 2024
- wiltec
Table of Contents
wiltec 60143-60146 US Mailbox
Product Information
The US Mailbox is a high-quality mailbox designed for everyday use and suitable for outdoor use. It comes with a top lock, bottom lock, new mail flag, rust-resistant screws, screw nuts, flag holder, washer, and assembly instructions. Please note that the illustrations, functioning steps, and technical data in the manual may vary slightly depending on the model.
Product Usage Instructions
Safety Precautions
- Before using the mailbox for the first time, read and follow the operating instructions and safety information provided in the manual.
- Take basic safety precautions to minimize the risk of injurywhile using the device.
- Keep the operation instructions in a safe place for future reference.
Assembly
- Place the top lock (A) over the mailbox (G) so that the holes match the appropriate drilling holes.
- Screw two short rust-resistant screws (B1) into the drilled holes.
- Secure the screws from the inside using two rust-resistant screw nuts (C).
- Place the bottom lock (D) so that the holes match the appropriate drilling holes.
- Screw two short rust-resistant screws (B1) into the bored holes.
- Secure the screws from the inside using two rust-resistant screw nuts (C).
Attaching the Flag
- Place one washer (H) on the front and one on the rear of the flag (E).
- Put the flag (E) and the flag holder (F) according to the drawing so that the holes match the appropriate drilling holes.
- Screw the long screw (B2) into the top hole and the short screw (B1) into the bottom hole.
- Secure the screws from the inside using two hexagon nuts (C).
Important Notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of thisinstruction manual require the written permission of WilTec Wildanger Technik GmbH.
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients take some basic safety precautions when using this device. Please read the operation instruc-tions carefully and make sure you have understood its content. Keep these operation instructions safe.
Intended use
Designed as a mailbox for everyday use, being suitable for outdoor use
Parts list
| № | Name | Qty. | № | Name | Qty. |
|---|---|---|---|---|---|
| A | Top lock | 1 | E | New mail flag | 1 |
| B 1 | Rust-resistant screws (short) | 5 | F | Flag holder | 1 |
| B 2 | Rust-resistant screws (long) | 1 | G | Letterbox/mailbox | 1 |
| C | Rust-resistant screw nuts | 6 | H | Washer | 2 |
| D | Bottom lock | 1 | I | Assembly instruction | 1 |
Safety precautions
- When assembling, please be careful to ensure that the hinges do not pinch your skin.
- When mounting the article, please ensure that it is attached securely, and take into account the risk of accidents when selecting a location.
Care and storage
- Clean with water only, never with abrasive products!
- Then wipe dry with a clean cloth.
- Hint! Grease the door hinges once a year.
Assembly
- Place the top lock (A) over the mailbox (G) so that the holes match the appropriate drilling holes.
- Screw two screws (B1) into the drilled holes.
- Secure the screws from the inside with two nuts (C).
- Place the bottom lock (D) so that the holes match the appropriate drilling holes.
- Screw two screws (B1) into the bored holes.
- Secure the screws from the inside with two nuts (C).
Attaching the flag
- Place one washer (H) on the front and one on the rear of the flag (E).
- Put the flag (E) and the flag holder (F) according to the drawing so that the holes match the appropriate drilling holes.
- Screw the long screw (B2) into the top hole and the short screw (B1) into the bottom hole.
- Secure the screws from the inside with two hexagon nuts (C).
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in
part, of this instruction manual require the written permission of WilTec
Wildanger Technik GmbH. Read and follow the operating instructions and safety
information before using for the first time. Technical changes reserved! Due
to further developments, illustrations, functioning steps, and technical data
can differ insignificantly. Updating the documentation If you have suggestions
for improvement or have found any irregularities, please contact us. The
information contained in this document may alter at any time without previous
notice. It is prohibited to copy or spread any parts of this document in any
way without prior written allowance. All rights re-served. The WilTec
Wildanger Technik GmbH cannot be held accountable for any possible mistakes in
this operating manual, nor in the diagrams and figures shown. Even though, the
WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes
cannot be entirely avoided. If you should find a mistake or wish to make a
suggestion for improvement, we look forward to hearing from you.
CONTACT
Send an e-mail to:
- [email protected].
- or use our contact form:https://www.wiltec.de/contacts/.
- The most recent version of this manual in various languages can be found in our online shop via:
- https://www.wiltec.de/docsearch.
- https://www.XPOtool.com.
- The Tool Experts
- Item 60143–60146, 60337–60340, 60341–60344 11 2022-1
- Illustration similar, may vary depending on model
Our postal address is:
- WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler Germany
- To return orders for exchange, repair, or other purposes, please use the following address. Attention! To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.
- Returns Department
- WilTec Wildanger Technik GmbH
- Königsbenden 28
- 52249 Eschweiler
- E-mail: [email protected].
- Tel: +49 2403 55592–0
- Fax: +49 2403 55592–15