HANS Premium Water Premium Water Reverse Osmosis Modules Instruction Manual

HANS Premium Water Premium Water Reverse Osmosis Modules

HANSTM Premium Water RO System Model 2
The HANSTM Premium Water RO System Model 2 is an appliance designed to provide clean and safe drinking water. It features a four-stage system that removes sediment, debris, chlorine, chloramines, sulfur, lead, arsenic, PFAS, iron, hardness, and other
contaminants. The system reintroduces minerals for pH balance and better taste. The appliance has a rugged exterior with heavy-duty molded housing that provides quiet operation indoors and long-lasting protection outdoors. It also has cooling vents that
keep the unit running cool. The intuitive touch-screen and quick-release pin system make filter and membrane change easy.

Technical Specifications

• Water temperature (min/max): 6 to 11
• Ambient temperature (min/max): 65°F to 200°F
• Feed pressure (min/max): 30 psi to 65 psi
• pH level (min/max): <3,000 ppm
• Output pressure: 110-240V, 50/60Hz; dedicated GFCI
• Maximum Inputs:
  • PFOA/PFOS: 25,000 ppt
  • Lead: 150 ppb
  • Iron: 2 ppm
  • Arsenic: 50 ppb
  • Nitrate: 30 ppm
  • Nitrite: 3.5 ppm
  • Hardness: 20gpg
  • Chromium 6: 300 ppb
  • Chromium Total: 300 ppb
  • Barium: 10 ppm
  • Radium: 25 pCi/L
  • Fluoride: 8 ppm
  • Chlorine: 4 ppm
  • Chloramines: 4 ppm
  • Turbidity: 1 ntu

Input levels outside of device parameters may require pretreatment such as a water softener or iron breaker. The system is designed and assembled in an ISO 13485 facility in Michigan.

Product Usage Instructions

The HANSTM Premium Water RO System Model 2 is easy to install and use. Here are the instructions:

1. Locate a suitable location for the appliance that is near the
   water source and has access to electricity.

2. Connect the three connection points in the following order:

   • Inlet water
   • Clean water out
   • Reject water out

3. Plug the appliance into a dedicated GFCI outlet.

4. The variable-speed pump will automatically adjust its speed depending on water demand, which uses less power and is more efficient than single-speed pumps.

5. The appliance has an intuitive touch-screen that provides easy servicing.

6. The quick-release pin system makes filter and membrane changes a snap.

7. If you have high-demand applications, you can install multiple HANSTM Premium Water RO System Model 2 appliances in parallel. This can drastically reduce downtime as one unit can be taken offline for service without disrupting water flow, keeping your business running and profitable.

Model 2: Everything for clean water in one brilliant appliance

HANSTM Premium Water RO System Model 2 is the first water treatment solution of its kind

• Reduces contaminant levels by up to 99.9%
• Reduces TDS (up to 3,000 ppm) levels by up to 99%
• The industry-best recovery rate of up to 90%
• The output of up to 34 liters per minute
• Removes hardness… without salt**
• Adds minerals for taste and pH balance
• Provides clean water for your whole business or home
• Continuously monitors water quality and usage
• Variable-speed pump that adjusts for fluctuations in water demand
• Automatically detects incoming TDS levels and adjusts to compensate for fluctuations
• Designed for well water and municipal water using chlorine or chloramines
• Does not require an add-on pressure tank

Four-stage system

1. Removes sediment and debris.
2. Removes chlorine, chloramines and sulfur.
3. Removes lead, arsenic, PFAS, iron, hardness and a host of other contaminants.
4. Reintroduces minerals for pH balance and better taste.

Ideal installation verticals

• Residential
• Commercial
• Industrial
• Agriculture
• Food & beverage
• Healthcare & laboratories
• Facilities & services

For high-demand applications, multiple HANSTM Premium Water RO System can be installed in parallel. This can drastically reduce downtime as one unit can be taken offline for service without disrupting water flow, keeping your business running and profitable.

Model 2 Technical Specifications

Operating Limits|  | Third-party test results **Tested ****at| HANS Result (After)
---|---|---|---
Water temperature (min/max)| 2°C to 35°C| Hardness| 700ppm ( 41gpg)| <1.0ppm
Ambient temperature (min/max)| 2°C to 48°C| Iron (ferric and ferrous)**| 3.46ppm| .Q18ppm
Feed pressure (min/max)| 30PSI to 60PSI| Fluoride| 7.54ppm| 0.8ppm
pH level (min/max)| 6to 11| Nitrate| 27.9ppm| 0.9ppm
Output pressure| 65PSI| Nitrite| 3.3ppm| 0.2ppm
Operating pressure| 200PSI| PFOA&PFOS| 25,000ppt| <5ppt
Output| “34litres/min| Lead| 139ppb| <1.0ppb

Maximum Inputs

• 99.99% reduction of bacteria and 99.9% of reduction in viruses
• Detailed test results available at HANSPremiumWater .com
• ppm = parts per million ppb = parts per billion
• ppt = parts per trillion gpg = grains per gallon

Model 1 results. Model 2 results are pending . Specifications are subject to change without notice. Input levels outside of device parameters may require pretreatment such as a water softener or iron breaker. Designed and assembled in an ISO 13485 facility in Michigan.6 Serangoon North Ave 5 #06-01
Singapore 554910
Email: hpw-asia@renewgpl.com

References

• Home - HANS™ Premium Water - Asia
• Convenient Water Delivery Near You | Primo Water Delivery
• ATS Water Technology tư vấn giải pháp công nghệ xử lý nước hàng đầu

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>