nVent Caddy 6190350HD 617 Pipe Roller With Steel Frame Owner’s Manual
- June 13, 2024
- nVent Caddy
Table of Contents
nVent Caddy 6190350HD 617 Pipe Roller With Steel Frame
Product Information
The product is a Guides & Rollers system designed for pipe installation. It consists of two models:
- 617 PIPE ROLLER WITH STEEL FRAME
- 619 ADJUSTABLE PIPE ROLLER WITH STEEL FRAME
617 PIPE ROLLER WITH STEEL FRAME
- Material: Steel
- Finish: Hot-Dip Galvanized; Electrogalvanized
Part Numbers and Descriptions
| Part Number | Description |
|---|---|
| 6170350HD | – |
| 6170600HD | – |
| 6171000HD | – |
| 6171400HD | – |
| 6172000HD | – |
| 6172400HD | – |
| 6173000HD | – |
Frame and axle are made of carbon steel, while the roll is made of cast iron. The product should be installed in accordance with the applicable code.
619 ADJUSTABLE PIPE ROLLER WITH STEEL FRAME
- Material: Steel
- Finish: Hot-Dip Galvanized; Electrogalvanized
Frame and axle are made of carbon steel, while the roll is made of cast iron. The product should be installed in accordance with the applicable code.
For further details or specific installation guidelines, refer to the complete user manual available at nVent.com/CADDY.
Product Using Instructions
617 PIPE ROLLER WITH STEEL FRAME
- Support pipe from a substructure or structural member where longitudinal movement may occur due to expansion or contraction
- Conforms with Federal Specification WW-H-171 (Type 45), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 44)
Material: Steel; Cast Iron
Finish: Hot-Dip Galvanized; Electrogalvanized
Part Number/ Description/F
- 6170350HD /2”–3 1/2” Pipe /390 lb
- 6170600HD /4”–6” Pipe /950 lb
- 6171000HD /8”–10” Pipe/ 2,100 lb
- 6171400HD /12”–14” Pipe/ 3,075 lb
- 6172000HD/ 16”–20” Pipe/ 4,980 lb
- 6172400HD/ 22”–24” Pipe/ 6,100 lb
- 6173000HD/ 26”–30” Pipe/ 7,500 lb
Frame and axle are carbon steel and roll is cast iron.
Install in accordance with applicable code.
619 ADJUSTABLE PIPE ROLLER WITH STEEL FRAME
- Support pipe from a substructure or structural member where longitudinal movement may occur due to expansion or contraction
- Vertical adjustment is provided by adjusting bolts on each corner
- Conforms with Federal Specification WW-H-171 (Type 47), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 46)
Material: Steel; Cast Iron
Finish: Hot-Dip Galvanized; Electrogalvanized
Part Number/ Description/ F
- 6190350HD/ 2”–3 1/2” Pipe/ 390 lb
- 6190600HD/ 4”–6” Pipe/ 950 lb
- 6191000HD/ 8”–10” Pipe/ 2,100 lb
- 6191400HD/ 12”–14” Pipe/ 3,075 lb
- 6192000HD/ 16”–20” Pipe/ 4,980 lb
- 6192400HD/ 22”–24” Pipe/ 6,100 lb
- 6193000HD/ 26”–30” Pipe/ 7,500 lb
Frame and axle are carbon steel and roll is cast iron.
Install in accordance with applicable code.