D-Link DI-614+ AirPlus Wireless Broadband Router Specifications And Datasheet

D-Link DI-614+ AirPlus Wireless Broadband Router

Product Description

802.11b Wireless Cable/DSL Router With 4-Port Switch
The DI-614+ AirPlus is a 2.4GHz 802.11b Wireless broadband Internet Gateway Router with a built-in 4-port Fast Ethernet Switch. It incorporates a wireless LAN Access Point with enhanced speeds of up to 22Mbps. Designed for small offices and homes, this router lets you quickly and easily share DSL or cable modem Internet connection, with or without the network wires. With advanced functions traditionally found in business-class routers also built inside, the DI-614+ gives the business and home a cost-effective way to install a secure and fast network with bottleneck-free links to the outside world.

• Simplified, Cost-saving Broadband Internet
  With the DI-614+, you can share your broadband line and cable/DSL modem anywhere in your office or home. To let everybody log on, this device automatically creates and assigns an IP number for each user, simplifying everyone’s logon operation.

• Ready Connection
  With a built-in wireless LAN Access Point and 10/100Mbps switch, the DI-614+ provides a ready connection for workstations and servers, with or without the network wires. The built-in functions also save you the cost and trouble of installing a separate Access Point and Ethernet switch.

• Enhanced Wireless Speeds
  The built-in Access Point enables the DI-614+ to be used in larger wireless networks in conjunction with other standards-based wireless LAN Access Points. At 22Mbps, the DI-614+ provides 802.11b wireless LAN users with a high data transfer rate within the industry standard. This speed is double the 11Mbps normally found in other 802.11b 2.4GHz wireless devices.

• Network Security
  The DI-614+ provides NAT protection for your office and home users from Internet intruders and hacker attacks, plus a VPN pass-through for extra security. It blocks and re-directs certain ports to limit the services that outside users can access your network. Virtual Server Mapping is used to re- task services to multiple servers. The DI-614+ can be set to allow separate FTP, Web, and Multiplayer game servers to share the same Internet-visible IP address while still protecting your servers and workstations from hackers. Protection for wireless users is provided through a 256-bit strong WEP data encryption scheme.

• DMZ Host to Open Public Domain
  You can configure any of the built-in LAN ports to function as a DMZ port. A DMZ setting can be applied to a single client (such as a Web server) behind the router to fully expose it to the Internet and ensure complete Internet application compatibility even if the specific port is not known. This allows you to set up websites and e-commerce businesses from your office while maintaining protection for the rest of your office LAN.

• UPnP Enabled for Compatibility
  The DI-614+ is designed for easy and robust connectivity among heterogeneous standards-based network devices. Computers can communicate directly with the DI-614+ for automatic opening and closing of UDP/TCP ports to take full advantage of the security provided without sacrificing the functionality of online applications.

• Network Timing Protocol (NTP) Support
  The DI-614+ supports the Network Timing Protocol (NTP), allowing you to install a time server behind the router to synchronize time for your network environment. This protects you from the risks inherent in obtaining the Internet, minimizes security risks from the outside, and maximizes timing accuracy on your network.

Features

• Wireless or wired Internet access through a broadband modem
• Cable/DSL modem Internet sharing
• Built-in 4-port Fast Ethernet switch
• Integrated 22Mbps enhanced-speed IEEE 802.11b Wireless LAN Access Point
• NAT routing security
• Virtual Private Network (VPN) pass-through support
• 256-bit WEP data encryption for wireless users
• DMZ and Virtual Server Mapping support
• Network Timing Protocol support
• Web-based and Telnet configuration
• SNMP agent & built-in MIBs for management on third-party platforms
• Sturdy, compact, wall-mountable case

Technical Specifications

Router

• CPU: ARM-7

WAN Interface

• 1 RJ-45 10BASE-T port
• Supports PPPoE for DSL and cable modem connection

LAN Interfaces

• 802.11b wireless LAN (22Mbps)
• 4 RJ-45 10BASE-T/100BASE-TX ports

Routed Packet Type

• IP packets

Routing Protocols & Methods

• RIP-1, RIP-2
• Static Routing
• Dynamic Routing

VPN Support

• IPSec pass-through

Internet Gateway Functions

• Network Address Translation (NAT)
• DHCP server (for automatic IP assignment)

Number of DMZ Ports

• 1 port (user-assignable to any LAN port)

Number of Virtual Server Mappings

• 10 entries

RFC Support

• RFC 0768 – User Datagram Protocol
• RFC 0791 – Internet Protocol
• RFC 0792 – Internet Control Message Protocol
• RFC 0793 – Transmission Control Protocol
• RFC 0821 – Simple Mail Transfer Protocol
• RFC 0826 – Ethernet Address Resolution Protocol
• RFC 1058 – Routing Information Protocol
• RFC 1112 – IGMP v1 (for UPNP and IAPP functions)
• RFC 1157 – Simple Network Management Protocol
• RFC 1213 – Management Information Base-II (MIB II)
• RFC 1332 – PPP Internet Control Protocol
• RFC 1350 – TFTP Protocol (Reversion 2)
• RFC 1514 – Dynamic Host Configuration Protocol
• RFC 1631 – IP Network Address Translator
• RFC 1661 – Point-to-Point Protocol (PPP)
• RFC 1723 – RIP-2 – Carrying Additional Information
• RFC 1945 – Hypertext Transfer Protocol HTTP/1.1 (subset)
• RFC 1994 – PPP Challenge Handshake Authentication Protocol (CHAP)
• RFC 2132 – DHCP Options and BOOTP Vendor Extensions
• RFC 2516 – PPP Over Ethernet (PPPoE)

IP Number Self-identification

• Through DHCP client

Configuration & Management

• Web-based configuration
• Telnet configuration
• SNMP agent with built-in MIB-II
• Network Timing Protocol (NTP) support
• UPnP support
• Factory reset (through reset button)

Firmware Upgrade

• Through TFTP

Memory

• SDRAM: 2MB
• Flash: 512KB

Built-in Wireless LAN Access Point

• Standard: IEEE 802.11b
• Reception Sensitivity Nominal Temp Range
  • 22Mbps: 10-5 BER @ -80 dBm minimum
  • 11Mbps: 10-5 BER @ -79 dBm minimum
  • 5.5Mbps: 10-5 BER @ -83 dBm minimum
  • 1Mbps: 10-5 BER @ -89 dBm minimum
• Frequency Range: 2.4 – 2.4835 GHz
• Modulation Techniques: Direct Sequence Spread Spectrum (DSSS), Packet Binary Convolutional Coding (PBCC)
• Data Rates: 22 Mbps, 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps, Auto fall-back
• Data Rate & Modulation:
  • 22Mbps/8.5db: PBCC
  • 11Mbps/4.5db: PBCC
  • 11Mbps/8.5db: CCK
  • 5.5Mbps/1.5db: PBCC
  • 5.5Mbps/5.5db: CCK
  • 2Mbps/3db: Barker

Operating Channels:

• North America (FCC): 11
• Canada (DOC): 11
• Europe (ETSI): 13 (Except Spain and France)
• Japan (MKK): 14
• Antennas: 2 detachable 2dBi Gain antennas (reverse SMA connectors)
• Operating Range: Up to 100 m (328 feet) indoors; Up to 400 m (1,312 feet) outdoors
• Operating Modes: Access Point; Access Point to Access Point bridging
• Roaming: Among Access Points on the same subnet
• Security: Data encryption: 64-bit, 128-bit, 256-bit WEP (Wired Equivalent Privacy); User-definable node access control list

Built-in Fast Ethernet Switch

• Standards:
  • IEEE 802.3 10BASE-T Ethernet
  • IEEE 802.3u 100BASE-TX Fast Ethernet
  • ANSI/IEEE 802.3 NWay auto-negotiation
• Supported Functions:
  • Full/half duplex (per port)
  • MDI-II/MDI-X auto uplink (per port)
  • Auto correction of twisted-pair Rx reverse polarity (per port)
• Flow Control: IEEE 802.3x Flow Control in full-duplex; Back pressure in half-duplex
• Transmission Method: Store-and-forward
• MAC Address Learning:

Physical & Environmental

Automatic update

• Diagnostic LEDs:
  • Power (status)
  • M1 (system ready)
  • M2 (system initial/backup/firmware download)
  • WAN (Link/Activity)
  • WLAN (status)
  • 1, 2, 3, 4 LAN ports (Link/Activity)
• Power Input:
  • DC 5V 2.5A
  • Through an external AC power adapter
• Dimensions: 235 x 190 x 39 mm (9.25 x 6.5 x 1.375 inches)
• Weight: 907 grams (2.0 lb.)
• Storage Temperature: 0 – 55 C (32 – 131 F)
• Operating Temperature: 0 – 55 C (32 – 131 F)
• Humidity: 95% maximum non-condensing

EMI Certification

• FCC Class B
• CE Class B

Safety Certification

• UL

Compatibility: Wi-Fi

Ordering Information

Wireless Broadband Internet Gateway Router
DI-614+ 1 RJ-45 10BASE-T port (for ADSL/cable modem connection) IEEE 802.11b wireless LAN AP 4 RJ-45 10BASE-T/100BASE-TX switch ports

Application

Internet Gateway Functions

The DI-614+ Internet Gateways lets wireless users log on to the Internet, share a network printer, access file servers, and communicate with wired Ethernet users.

FAQ’s

What is the D-Link DI-614+ AirPlus Wireless Broadband Router?

The D-Link DI-614+ AirPlus Wireless Broadband Router is a versatile router that provides wireless connectivity and broadband sharing for your home or small office network.

What wireless standard does the DI-614+ support?

The DI-614+ supports the IEEE 802.11b wireless standard.

How many devices can connect wirelessly to the DI-614+?

The DI-614+ can support multiple wireless devices, making it suitable for homes and small offices with various connected devices.

Can I connect wired devices to the DI-614+ as well?

Yes, the DI-614+ has Ethernet ports that allow you to connect wired devices such as computers and printers.

Does the router support security features to protect my network?

Yes, the DI-614+ offers security features like WEP encryption to secure your wireless network.

How do I set up the DI-614+ router?

Setting up the DI-614+ is straightforward and typically involves using a web- based configuration interface for initial setup.

What is the range of the wireless signal for the DI-614+?

The wireless range of the DI-614+ can vary depending on factors like interference and obstructions, but it's designed for typical home and small office coverage.

Can I use the DI-614+ for online gaming and streaming?

Yes, the router can handle online gaming and streaming, provided your internet connection speed supports these activities.

Does the DI-614+ router support Quality of Service (QoS)?

Yes, the DI-614+ supports QoS settings, allowing you to prioritize certain types of network traffic for a better online experience.

What is the warranty for the DI-614+ router?

The warranty period for the DI-614+ router may vary, so it's essential to check with the manufacturer or retailer for specific warranty details.

Can I update the router's firmware for improved performance and security?

Yes, it's a good practice to regularly check for firmware updates and install them to ensure your router operates optimally and securely.

Is the DI-614+ router compatible with older devices?

Yes, the DI-614+ supports backward compatibility with devices that use the 802.11b wireless standard.

What should I do if I encounter connection issues with the DI-614+ router?

If you experience connection problems, you can troubleshoot by checking your network settings, restarting the router, or contacting customer support for assistance.

References:D-Link DI-614+ AirPlus Wireless Broadband Router – Device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>