clintonelectronic CE-UAPXL Universal VESA Adapter Plate Installation Guide
- June 13, 2024
- clintonelectronic
Table of Contents
CE-UAPXL Install Guide
CE-UAPXL Universal VESA Adapter Plate
Included Items:
- VESA Adapter Plate x 1
- M4 x 12mm Screws x 4
- M4 Locknuts x 4
- M6 x 8mm Screws x 4
- M6 x 12mm Screws x 4
- M8 x 12mm Screws x 4
Required Items:
- PH2 & PH3 Phillips Head Screwdriver
- 7mm Wrench
Maximum Load Capacity: 60 Lbs. / 27.2 Kgs.
ATTENTION!
USE ONLY AS DESIGNED
This adapter plate is designed to mount a large monitor (up to 60 Ibs) to a
Clinton Electronics Telescoping Monitor Pole. It is intended for use only with
the maximum weight indicated. Use with products heavier than the maximum
weights indicated may result in instability causing possible injury.
Attach VESA Plate
Using the supplied four M4 Phillips Flat head screws, and lock nuts, attach
the VESA plate from the telescoping monitor pole to the CE-UAPXL adapter
plate.
Note: The screws should be inserted into the countersunk holes on the
adapter plate. If screws are not inserted in the countersunk holes, the
adapter plate will not sit flat against the monitor, and damage to the back of
the monitor may occur.
Attach Adapter Plate to Monitor
Select the appropriate VESA mounting hole pattern and attach the monitor to
the adapter plate using the supplied M6 or M8 Phillips head screws.
Refer to the Telescoping Monitor Pole instructions to complete the
installation.
REFER TO TELESCOPING POLE INSTRUCTIONS TO COMPLETE INSTALLATION
Clinton electronics I 6701 Clinton Road Loves Park, IL 61111 I 800.549.6393
(Support) I www.clintonelectronics.com
v.06.06.23
Documents / Resources
|
clintonelectronic CE-UAPXL Universal VESA Adapter
Plate
[pdf] Installation Guide
v060223_O, CE-UAPXL Universal VESA Adapter Plate, Universal VESA Adapter
Plate, VESA Adapter Plate, Adapter Plate
---|---