DAI ICHI DENTSU Freedom³ LAB Torque Angle Digital Wrench Owner’s Manual
- June 13, 2024
- DAI ICHI DENTSU
Table of Contents
- DAI ICHI DENTSU Freedom³ LAB Torque Angle Digital Wrench
- Improve Quality of Retightening Process
- Contribution to Traceability
- Function
- Inspection & Fastening Mode
- Specification
- Break-away Peak Setting
- Freedom3 Error List
- Package Contents
- Accessories
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DAI ICHI DENTSU Freedom³ LAB Torque Angle Digital Wrench
Improve Quality of Retightening Process
- Embed with LCD. Torque value and angle value can be indicated on display after retightening.
- Operator can check quality variation and slipping point of the screw.
Ex, Possible to check slipping point of screws. (measure static torque and dynamic torque)
Easy to compare multiple data
Contribution to Traceability
- Automatic saving for measured quality data ︓Data can be stored up to 20,000 data.
- Cooperation with PC ︓Data can be output to PC through software.（Excel、PDF）
Function
Inspection & Fastening Mode
| Inspection Mode | Application |
|---|---|
| Break-away Peak | Detect maximum torque during retightening |
| Break-away Angle | Detect maximum tightening torque at specified angle |
| Smart Break-away Angle | Detect screw slipping torque during retightening |
| Minimum Torque | Check if bolt has been already tightened |
| Loosen Torque | Detect torque when loosening to the specified angle |
| Loosen/Tighten | Detect torque by loosening and tightening |
| Joint Analysis | Bolt fracture analysis |
| Fastening Mode | Application |
| --- | --- |
| Fast. Torque | Torque screw tightening |
| Fast. Torque + Angle | Screw tightening at an angle from the specified |
torque
Fast. Yield| Yield point tightening
Fast. Yield + Angle| Tightening at an angle from the yield point
Specification
Torque accuracy| 0.5 % Reading±1 Dig (20%～100% of Max Torque)
1 %Reading ±1 Dig (10%～20% of Max Torque)
---|---
Torque Overload Capacity| 110 %
Angle Accuracy| ±1° over 360°
Maximum Angular Velocity| 300 °/s
Memory Capacity| 1,000 tightening programs 20,000 result data 20,000
curve data
(*Save the latest data on reaching maximum capacity)
Touch Screen Display| 2.8” Touch screen display (Resistive type)
Display 320 x 240 Pixels 65535 colors
Temperature Stability of
Torque Measurement
| 0.1％ / ℃ of maximum torque value
Battery Information| Operating time :9 hours
Charging time : Battery Charger / 4 hours
USB Cable / 6 hours
Inspection Mode【Break-away Peak】
This mode is to detect and display peak torque during retightening.
Retighten the tightened bolt and stop tightening when the bolt starts to
rotate.
Inspection Mode【Break-away Angle】
This mode is to measure torque / angle when tightening up to break angle,
starting from angle threshold torque during retightening. Retighten the
tightened bolt and stop tightening when the bolt starts to rotate.
Inspection Mode【Smart Break-away Angle】
This mode is used for measuring the slip-out torque when retightening. The
result value can select from dynamic torque / No Dynamic by setting. Retighten
the tightened bolt and stop tighteningthe bolt starts to rotate.
- If you enter stop angle, the operation applies for angle method. When the specified angle is reached, buzzer and [Release Torque] message is shown on display. Then stop measuring.
- When alarm torque and alarm angle are reached, judge that screws are overtightened and alarm warning.
Inspection Mode【Minimum Torque】
This mode is to check if the specified Torque (Minimum Torque) is reached from
Angle Threshold Torque to Check Angle. Use when you want to check the
tightening torque easily.
Inspection Mode【Loosen Torque】
This mode is to measure Torque / Angle when loosening from Start Torque to
Return Angle. Torque value is shown as negative. 
Inspection Mode【Loosen/Tighten】
This mode is to measure Torque / Angle when the tightened bolt is loosened to
the specified Angle and then tightened again to the specified Angle. Use when
you want to avoid excessive tightening.
Inspection Mode【Joint Analysis】
This mode is to measure Yield point when bolts are tightened. Use when you
want to check joint analysis.
Break-away Peak Setting
Confirmation of Break-away Peak Result
Break-away Peak History Check
Freedom3 Error List
Wrench Specification
Model| Capacity
(Nm)
| L1
(mm)
| L2
(mm)
| Weight
(kg)
| Joint Drive
(mm)
| Socket Drive
(mm) *1
---|---|---|---|---|---|---
Freedom3 TA 15| 15| 375| 393| 0.80| 9×12 凹| 9.5
Freedom3 TA 30| 30| 375| 393| 0.86| 9×12 凹| 9.5
Freedom3 TA 70| 70| 480| 498| 0.93| 9×12 凹| 9.5
Freedom3 TA 100| 100| 480| 498| 0.93| 9×12 凹| 12.7
Freedom3 TA 200| 200| 604| 629| 1.50| 14×18 凹| 12.7
Freedom3 TA 300| 300| 754| 779| 1.86| 14×18 凹| 19.0
Freedom3 TA 400| 400| 854| 879| 2.00| 14×18 凹| 19.0
Freedom3 TA 600| 600| 1032| 1057| 3.65| 14×18 凹| 19.0
Freedom3 TA 800| 800| 1250| 1330| 5.10| Ø 20| 19.0
Freedom3 TA 1000| 1000| 1520| 1610| 6.25| Ø 20| 19.0
Freedom3 TA 1200| 1200| 1530| 1732| 7.00| Ø 28| 25.4
- 1 Square drive size above mentioned is the reversible ratchet attached with wrench.
Package Contents
- Freedom Body
- Battery
- USB Cable
- Reversible Ratchet
- PC Software
- Instruction Manual
Accessories
Open End
| Model | Size [mm] | Joint drive size [mm] |
|---|---|---|
| 731/10-7 | 7 | 9X12 |
| 731/10-8 | 8 | 9X12 |
| 731/10-9 | 9 | 9X12 |
| 731/10-10 | 10 | 9X12 |
| 731/10-11 | 11 | 9X12 |
| 731/10-12 | 12 | 9X12 |
| 731/10-13 | 13 | 9X12 |
| 731/10-14 | 14 | 9X12 |
| 731/10-15 | 15 | 9X12 |
| 731/10-16 | 16 | 9X12 |
| 731/10-17 | 17 | 9X12 |
| 731/10-18 | 18 | 9X12 |
| 731/10-19 | 19 | 9X12 |
| 731/40-13 | 13 | 14X18 |
| 731/40-14 | 14 | 14X18 |
| 731/40-15 | 15 | 14X18 |
| 731/40-16 | 16 | 14X18 |
| 731/40-17 | 17 | 14X18 |
| 731/40-18 | 18 | 14X18 |
| 731/40-19 | 19 | 14X18 |
| 731/40-21 | 21 | 14X18 |
| 731/40-22 | 22 | 14X18 |
| 731/40-24 | 24 | 14X18 |
| 731/40-25 | 25 | 14X18 |
| 731/40-27 | 27 | 14X18 |
| 731/40-30 | 30 | 14X18 |
| 731/40-32 | 32 | 14X18 |
| 731/40-34 | 34 | 14X18 |
| 731/40-36 | 36 | 14X18 |
| 731/40-38 | 38 | 14X18 |
| 731/40-41 | 41 | 14X18 |
Ring End
| Model | Size [mm] | Joint drive size [mm] |
|---|---|---|
| 732/10-7 | 7 | 9X12 |
| 732/10-8 | 8 | 9X12 |
| 732/10-10 | 10 | 9X12 |
| 732/10-11 | 11 | 9X12 |
| 732/10-12 | 12 | 9X12 |
| 732/10-13 | 13 | 9X12 |
| 732/10-14 | 14 | 9X12 |
| 732/10-15 | 15 | 9X12 |
| 732/10-16 | 16 | 9X12 |
| 732/10-17 | 17 | 9X12 |
| 732/10-18 | 18 | 9X12 |
| 732/10-19 | 19 | 9X12 |
| 732/10-21 | 21 | 9X12 |
| 732/10-22 | 22 | 9X12 |
| 732/40-13 | 13 | 14X18 |
| 732/40-14 | 14 | 14X18 |
| 732/40-15 | 15 | 14X18 |
| 732/40-16 | 16 | 14X18 |
| 732/40-17 | 17 | 14X18 |
| 732/40-18 | 18 | 14X18 |
| 732/40-19 | 19 | 14X18 |
| 732/40-21 | 21 | 14X18 |
| 732/40-22 | 22 | 14X18 |
| 732/40-24 | 24 | 14X18 |
| 732/40-27 | 27 | 14X18 |
| 732/40-28 | 28 | 14X18 |
| 732/40-30 | 30 | 14X18 |
| 732/40-32 | 32 | 14X18 |
| 732/40-34 | 34 | 14X18 |
| 732/40-36 | 36 | 14X18 |
| 732/40-41 | 41 | 14X18 |
Conversion Adapter Head
| Model | Joint drive size [mm] | Head size [mm] |
|---|---|---|
| 7370/10 | 9X12 | 14X18 |
| 7370/40 | 14X18 | 9X12 |
Square Drive Head
| Model | Joint drive [mm] | Drive hex [mm] |
|---|---|---|
| 734/4 | 9X12 | 6.35 (1/4 inch) |
| 734/5 | 9X12 | 9.5 (3/8 inch) |
| 734/10 | 9X12 | 12.7 (1/2 inch) |
| 734/20 | 14X18 | 12.7 (1/2 inch) |
| 734/40 | 14X18 | 19.0 (3/4 inch) |
- Storage Case
- Order manufacturing
- Order manufacturing
- Charging Cradle
- Required Option Freedom3-CP(Can be retrofitted）
| Model | Model（with display protector） |
|---|---|
| TAW-PSS3 – 15/30/50 Nm | TAW-PSS3 RP – 15/30/50 Nm |
| TAW-PSS3 – 70/100 Nm | TAW-PSS3 RP – 70/100 Nm |
| TAW-PSS3 – 200 Nm | TAW-PSS3 RP – 200 Nm |
| TAW-PSS3 – 300 Nm | TAW-PSS3 RP – 300 Nm |
| TAW-PSS3 – 400 Nm | TAW-PSS3 RP – 400 Nm |
| TAW-PSS3 – 600 Nm | TAW-PSS3 RP – 600 Nm |
| TAW-PSS3 – 800 Nm | TAW-PSS3 RP – 800 Nm |
| TAW-PSS3 – 1000 Nm | TAW-PSS3 RP – 1000 Nm |
| TAW-PSS3 – 1200 Nm | TAW-PSS3 RP – 1200 Nm |
Headquarters 1-54-1, Shimoishihara, Chofu-City, Tokyo 182-0034 Japan TEL:+81-424-40-1465 FAX:+81-424-40-1436 Kani Plant 690-1 Omori, Kani-City, Gifu, 509-0238 Japan TEL:+81-574-62-5865 FAX:+81-574-62-3523 URL:http://www .daiichi-dentsu.co.jp E-mail:sales@daiichi-dentsu.co.jp
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>